Select Page

AccuFiz D

Measure thin, transparent optics without coating the surfaces.

A short coherence length source and Dynamic Interferometry let you isolate and measure the individual surfaces of transparent optics such as windows and domes. Measure remote cavities and optical thickness, even on thinner materials.

4D Technology AccuFiz D Fizeau Laser Interferometer

Measuring thin, transparent optics is an extremely challenging application. Reflections from the two, close surfaces create a complex fringe pattern that is difficult or impossible to measure.

The AccuFiz D Short Coherence Dynamic Fizeau interferometer provides high accuracy measurement of flat and curved transparent optics. Its short coherence length source means you can measure plane-parallel surfaces <0.2 mm apart without the need for coating to eliminate unwanted fringes. A fast, automated internal system lets you quickly scan to locate and isolate each surface.

AccuFiz D Specs

Configuration On-axis Fizeau interferometer
Acquisition Vibration-insensitive Dynamic Interferometry
Source External Short coherence (~200µm) source
Wavelength 636 nm
Camera 9MP, 12-bit
Controls Remote control focus, zoom, pan, extended source size, measurement
Zoom Continuous 1–10X  with pan, calibrated at all zoom settings
Software 4Sight™ Focus included
Size Small, 51.4 cm (20.2 in) long
Aperture 100 mm (4 in) or 150 mm (6 in); optional to 600 mm (24 in)

The short coherence source, fully on-axis optical design, and 4D’s patented Dynamic Interferometry, combine to let you isolate and measure the individual surfaces in complex optical systems. Perform remote cavity and solid cavity tests—even measure into environmental and vacuum chambers.

The AccuFiz D eliminates the need for slow, vibration-sensitive phase shifting. Its patented, single camera, high-speed phase sensor makes a complete wavefront measurement in as little as 150 microseconds. Because acquisition time is so short, the system can be used under almost any conditions, even for measuring moving parts, without vibration isolation.

The short coherence source, fully on-axis optical design, and 4D’s patented Dynamic Interferometry, combine to let you isolate and measure the individual surfaces in complex optical systems. Perform remote cavity and solid cavity tests—even measure into environmental and vacuum chambers.

The AccuFiz D eliminates the need for slow, vibration-sensitive phase shifting. Its patented, single camera, high-speed phase sensor makes a complete wavefront measurement in as little as 150 microseconds. Because acquisition time is so short, the system can be used under almost any conditions, even for measuring moving parts, without vibration isolation.

The AccuFiz D features a completely on-axis design, meaning the reference and test beams follow nominally identical paths through the instrument’s imaging optics. As a result, aberrations and thickness variations in the system’s internal optics cancel out. The result: highly accurate measurements, even on non-spherical domes and other curved surfaces.

Shop-wide versatility

The dynamic AccuFiz D is insensitive to vibration, so it can operate in environments where other instruments simply cannot. Use the AccuFiz D right on the shop floor to measure:

  • Windows, thin glass, sapphire wafers
  • Domes and other curved, transparent components
  • Flats, spheres, prisms
  • Polished semiconductor components
  • Remote cavities
  • Solid cavities
  • Optical thickness
  • Transmission of components and systems
  • Moving parts
  • parts in vacuum and environmental chambers

Large aperture options

The AccuFiz D is fully compatible with 4D large optics accessories. These beam expanders and mounts enable easy handling and measurement of large optics, with 12 in (300 mm), 18 in (450 mm) and 24 in (600 mm) options. Kinematic mounting means you can use the interferometer with the accessories, remove it to use in stand-alone mode, then return it to the beam expander without realignment.

data

analysis

software

Introducing 4Sight Focus

The all-new 4Sight Focus analysis software—included with all 4D interferometers and optical profilers—provides blazing fast acquisition, rich visuals, and a wealth of analysis features.

  • Fast acquisition and analysis
  • Clean, configurable interface
  • Simple to learn
  • Deep analysis capabilities
  • Easy data output
  • Smart integration and automation.
4Sight Focus Customizable Interferometer Analysis Software

Fizeaus and optical production

AccuFiz Fizeaus are well suited to optics manufacturing.

Added Technical Resources

h

Setting the Wedge Factor Tech Note

The Wedge Factor scales results to account for the geometry of an optical test setup. This tech note explains how to set the parameter for measuring wavefront error and surface height in common configurations.

h

Measuring Transparent Domes Application Note

Thin, transparent domes present several challenges for interferometric measurement. This application note shows how a “surface isolation source” makes it possible to isolate and measure the outer and inner surfaces of transparent domes in a single setup.

Get In Touch

(520) 294-5600

Location

3280 E Hemisphere Loop, Ste 146
Tucson, AZ 85706

Email

4Dinfo@ontoinnovation.com

Office Hours (Arizona Time)

Mon: 8am - 5pm
Tue: 8am - 5pm
Wed: 8am - 5pm
Thur: 8am - 5pm
Fri: 8am - 5pm
Sat: Closed
Sun: Closed

Send A Message