Chassis; Components Of The Item; Instructions; Ganciomatic System - Peg-Perego TEAM Instructions For Use Manual
Hide thumbs
Also See for TEAM:
- Instructions for use manual (21 pages) ,
- Instructions for use manual (28 pages)
Table of Contents
Advertisement
Available languages
Available languages
MODIFICATIONS TO THE STROLLER
WITH PRODUCTS NOT SUPPLIED BY
THE MANUFACTURER AS THIS MAY
CAUSE INSTABILITY OR STRUCTURAL
DEMAGE NOT COVERED UNDER
WARRANTY.
NOTICE
THIS ARTICLE MEETS OR EXCEEDS
ALL REQUIREMENTS COVERED IN
ASTM F833 STANDARD AND LATEST
REVISIONS.
CHASSIS:
COMPONENTS OF THE ITEM
Check the contents of the packaging and if
you have any complaints please contact the
Assistance Service.
_ Chassis Team: basket, 2 rear wheels and 2
front wheels.
INSTRUCTIONS
1 OPENING: Before opening the frame, remove
(without using blades) any die-cut cardboard.
Release the two tabs on the sides of the frame
(fig_a). Lift and rotate the handle (fig_b) until
the frame opens completely. Press the handle
until it clicks (fig_c) and check that the safety
devices are properly secured by lifting it in the
opposite direction. WARNING: when fastening
the seat, press down on same to secure it to the
Ganciomatic base.
2 WHEEL ASSEMBLY: fit the front wheels by
inserting them until they click (fig_a) and
then proceed similarly with the rear wheels
until they click (fig_b).
3 LOCKED OR SWIVEL FRONT WHEELS: to turn
the front wheels into swivelling wheels, move
the side levers towards the open padlock
(fig_a). To lock the wheels, move the levers
towards the closed padlock (fig_b). We
recommend using fixed wheels on uneven
terrain.
4 BASKET: there are two sip strips on the front
of the basket for its easy use (fig_a). The
support tube can be lowered on the back
for better use of space (fig_b). Furthermore,
there are two convenient pockets in the
basket (fig_c).
5 BRAKE: press the brake lever to lock the
frame (fig_a), the frame is locked when the
red symbol appears (fig_b). To unlock the
brake, proceed in reverse order, the frame
is unlocked when the symbol is fully green
(fig_b).
6 ADJUSTABLE HANDLE BAR: to adjust the
height of the handle bar, simultaneous pull
up the side buttons (fig_a), move the handle
bar to the required positions (fig_b) and
release the buttons.
7 LOCK: fully lower the handle bar (fig_6).
Press the central safety lever with your thumb
(fig_a), grasp and lift the lock handle (fig-.b) to
rotate the handle bar forward until fully locked
(fig_c).
8 To correctly lock, make sure the side hooks
are fully closed (fig_a). The chassis can be
taken anywhere (fig_b).
9 BASKET REMOVAL: detach and remove the
two Velcro strips under the front chassis
footboard (fig_a). Lower the hinges (fig_4a)
remove the side flaps from the buttons
(fig_b) and unhook the buttons from the
eyelets (fig_c).
10 Detach the two Velcro strips under the back
part of the basket (fig_a), unhook the two
side eyelets (fig_b) and remove the basket
from the support tube (fig_c).
11 All the wheels can be removed to further
reduce dimensions.
To remove the front wheels: press the button
as illustrated and remove the wheel (fig_a).
To remove the back wheels: pull the tabs out
and remove the wheels as illustrated (fig_b).
12 ATTENTION: Do not touch the fastening
knob on the Ganciomatic base unless
required by specific instructions.
Check that the base is correctly secured
to the frame by making sure the arrows
are positioned as illustrated and that the
indicator is green. IMPORTANT: Lift the
base up to ensure it is correctly fastened.
Otherwise, secure the Ganciomatic base
as indicated in point 14.
13 REMOVING THE GANCIOMATIC BASE:
Simultaneously press the safety button and
turn the knob in the direction of the arrow
(fig_a). The safety button indicator will be
red (fig_b). Remove the base from the frame
(fig_c).
14 SECURING THE GANCIOMATIC BASE: To
secure the base, make sure the indicator is
red (fig_13b). Correctly place the base on the
frame (fig_a) with the hooks under the lock
pins (fig_b). Turn the knob in the direction of
the arrow until it clicks, the safety indicator
turns green (fig_C).
IMPORTANT: Lift the base up to ensure it
is correctly fastened.
GANCIOMATIC SYSTEM
15 Ganciomatic is a fast and practical system
that allows you to attach the Bassinet
bassinet unit, the Primo Viaggio car seat or
the Seat Pop Up seat to the Ganciomatic
Base of the chassis in one quick step.
Place the item on the Ganciomatic Base and
press down with both hands until it clicks
- 15 -
Hide quick links:
Advertisement
Table of Contents
