December 2015 by Farmers Guide

Farmers Guide

Farmers Guide www.farmersguide.co.uk

•

December 2015

•

Issue No. 436

FREE for farmers

December 2015 • Issue No. 436

BALE FEEDING & STRAW BLOWING

For the Best Deals:

Contact Kieran or Mike at the number s below

Features Include

1 www.farmersguide.co.uk

300 Degree Swivel Chute

2 Joystick Control

48 Blade Feed Rotor

Self Loading Tailgate

England & Wales - Kieran Hughes - 07850 373 145 Northern England & Scotland - Mike McCarthy - 07796 148 769 1-23 ROP Dec.indd 1

16/11/2015 15:04

AGRI-HIRE LTD

Est. 1986

Fidgeons Farm, Bullen Lane, Bramford, Ipswich, Suffolk IP8 4JJ

www.agrihire.co.uk agrihire@agrihire.co.uk

Additiona

RSON SALES PEed requir contact

ire.co.uk

tim@agrih

Vertical Beater Spreaders – We offer both Y Body and Classic spreader options, they are capable of handling all straw based materials with excellent spread patterns and very high output. Complete with slurry door, sprung drawbar and wide angle PTO options. Up to 40T capacity in single, tandem & tri-axle models.

Horizontal Spinner Deck Spreaders – Up to 40 tonne capacity, these machines will spread a wide range of material including poultry manure, sludge, Limex and green waste with spread widths up to 24 metres. Complete with slurry door, sprung drawbar wide angle PTOs and load cell options, in single, tandem & tri-axle models. Bulk Trailers – Capacities from 14 to 20 tonne in models to suit grain, all vegetable crops, sugar beet, silage, compost and manure. We have been manufacturing trailers for over 20 years, our trailers are built on well proven and tested chassis. We use large capacity hydraulic rams on all our hydraulic tail gates to ensure long life and reliability with antiburst valves for safety. All our trailers are on 10 stud commercial axles with a choice of suspensions and track widths to suit the particular needs of the application we can also ﬁt a vast range of wheel and tyre equipment options.

Flat Trailers – From 24 to 32 feet, all have commercial 10 stud axles, multi-leaf commercial suspension and 18 tonne sprung drawbar. We incorporate both rope hooks and a cleaver bar to hold a ratchet strap hook so it does not fall off when you go around to the other side of the trailer to pull it tight. We can ﬁt a hydraulic box nipper on the back of the trailer to save strapping on empty potato boxes this can also incorporate an easy sheet system that gives the operator a clear view from the tractor to ﬁll the boxes, our customers tell us it is the best they have used.

We can supply the full range of Dowdeswell ploughs and presses, including 100, 105, 141, 145 and 170 Series ploughs, suitable for wheeled and crawler tractors from 100hp to 600hp in 4 to 10 furrow options. They are available with a choice of bodies to suit your particular land. We also have a range of used and rerurbished ploughs. We hold the largest stock of genuine Dowdeswell parts, available for next day delivery.

Hire James Seeley 07860 849685

1-23 ROP Dec.indd 2

Spreader, Trailer & Tanker Sales Tim Hubert 07712 780056

Machinery & Parts Sales Jeremy Waspe 01473 744184

Transmissions Mick Hewitt 01473 240377

12R45B

13/11/2015 15:49

Editor

In this month's issue Jane Potts jane@farmersguide.co.uk

Out and About .....................................5 Grain and Fertiliser Gossip -– Graham Henderson .....................7 Arable:

Finance and Production Director Julie Goulding julie@farmersguide.co.uk

Spring Cropping options ........9 Dual-purpose spring barley 15 Field Focus ................................... 16 Agronomy Update .................. 19 Biobed options.......................... 19 About People .................................... 21

Editorial David Williams Machinery and features editor david@farmersguide.co.uk

Dominic Kilburn Production and arable editor dominic@farmersguide.co.uk

Machinery: Krone expands forager line up ............................................ 25 Tractors, forage harvesters and sprayers from John Deere .............................................. 31 Great Plains new products and updates ................................ 37 Valtra updates N-series tractor line-up ........................... 41 Mitsubishi L200 test drive... 47 Claas maize cracker improves milk yield ................ 51

Advertising Jana Moyes jana@farmersguide.co.uk 01473 694457

Manitou handlers on farm report ............................................. 66 Special features: Renewable Energy .................. 63 Muck & Slurry including Power on the Land .................. 69

Joanna Blower joanna@farmersguide.co.uk 01473 694452

Agricultural Contractors ............. 82 Henry Brown’s Vintage Page ..... 86 Classified ............................................. 87 Recruitment .....................................137

William Taylor william@farmersguide.co.uk 01473 694456

Kate Ilott kate@farmersguide.co.uk 01473 694454

Database and Farmad manager Lucy Wallace lucy@farmersguide.co.uk 01473 694453

Coming next month…

• LAMMA Preview • Agritechnica review • Latest Grimme sugar beet harvester seen in Germany • Suffolk farm sale • New products from Kubota • Soil and Water Management Centre workshop • New AHDB Recommended List • CropTec – including the 2015/16 PGRO Pulse Recommended List • Agronomist’s conference – report

Buy and sell through Farmers Guide FarmAds

Production Studio manager Simon Kotz studio@farmersguide.co.uk

www.farmads.co.uk

Free advertising for farmers

Visit our website www.farmersguide.co.uk Follow us

@farmersguide

ISSN: 2053-5414

Published by Early Bird Farming Publications Ltd from its office at Parkside, London Road, Ipswich, Suffolk IP2 0SS – Tel 01473 691888; www.farmerguide.co.uk. Original articles and advertisements created by Farmers Guide are copyright and are not to be reproduced in any form without the written permission of the Editor. No responsibility can be accepted by Farmers Guide for the opinions expressed by its contributors.

For Farmads and general enquiries call 01473 691888 December 2015 www.farmersguide.co.uk

1-23 ROP Dec.indd 3

16/11/2015 15:52

Wednesday 20th and Thursday 21st January 2016 East of England Showground, Peterborough PE2 6XE

Join us at the UKâ&#x20AC;&#x2122;s largest Farm Machinery Show

LAMMA is FREE to attend and we also provide FREE car parking on site

www.lammashow.co.uk Follow us on:

1-23 ROP Dec.indd 4

10/11/2015 16:08

Out and About with the FG team

Agritechnica: past, present and future The huge biennial Agritechnica agricultural machinery show took place in Hannover in early November. And, if this year’s event is anything to go by, the future of farm mechanisation will include more power, more complexity, more versatility and better performance. But that will come with strict transport regulations meaning wider, taller, longer and heavier machines are not a practical option, and so many of the new features are crammed in to the same sized machines that are available currently. Obviously, increased use of computers and precision farming products featured heavily and there are plenty of new systems incorporating communications technology to ensure machine operators can share information with the farm office without returning to the yard, and navigation systems are able to provide the fastest possible routes from A to B, avoiding low or narrow bridges and directing the operator to the precise field where operations are planned. Weather forecasts are available for specific areas of the farm so that the field operations can be planned and optimised around what is likely to happen during the day. Updates to some of the largest equipment, including potato, root crop and combine harvesters include larger separation and cleaning areas. Sugar beet harvesters with longer and more aggressive cleaning tables, potato harvesters with extendable cleaning traces, and combine harvesters with adjustable threshing and extendable separation systems, promise to allow greater throughput in tough working conditions, with unloading capacity to match. Tractors have more power packed under the bonnet but boast even better fuel efficiency to allow farms to optimise work rates, and higher hydraulic flow rates mean cycle times are reduced for faster loader work and to power more demanding equipment. Sprayers have new features to minimise time spent in the yard and maximise time working in the field and operators can rely on computerised control which offers inch-perfect applications, to minimise chemical waste, optimise growth

conditions for crops and to protect the environment. Away from the bustle of the modern machinery stands at the event, there was relative tranquillity in a hall dedicated to farming’s past, where some very unusual and interesting examples of machinery from decades gone by were displayed. For the show’s duration, the room was busy with farming families examining these reminders of the days when agriculture was carried out without computers, when fuel consumption and emissions were not an issue and when a canopy or a basic cab was the height of driver luxury. The machinery industry has come a long way during the past 100 years, and we can only wonder what the next 100 years will bring. See the January issue for a full Agritechnica review report.

someone who holds such a certificate. The VI also points out that, from 26th November 2015, it also becomes an offence for anyone to purchase pesticides authorised for professional use unless they have ensured that the intended end user holds the relevant specified certificate(s). “It’s important that everyone understands their legal obligations in relation to the ending of Grandfather Rights, and the purchase and use of professional pesticides. From the 26th November this change in legislation could have serious consequences for anyone caught out,” said AIC’s Hazel Doonan. The certificates required for most agricultural users are either: ‘The City & Guilds NPTC Level 2 Award in the Safe Use of Pesticides Replacing Grandfather Rights’, or a ‘level 2 award in the safe use of pesticides’ AND all relevant application modules for the type of application undertaken (eg. PA2, PA6). Farmers looking for details of providers for training and certification can visit www. pesticides.gov.uk, and for help deciding which certification route is most appropriate for the farm business consult the Grandfather Rights pages at voluntaryinitiative.org.uk.

And finally…

This 1927 Stock crawler seen at Agritechnica offered little protection for the driver.

Time’s up for Grandfather Rights From November 26th 2015 anyone applying a pesticide authorised for professional use will need to hold a specified certificate of competence, reminds the Voluntary Initiative. The exemption allowing those born before 31st December 1964 to use professional pesticides without such a certificate has therefore ended. From this date anyone using professional pesticides will need to have a certificate prior to making the application, unless they are being supervised for the purpose of training by

A tough old sheep farmer from Scotland gave some good advice to his granddaughter. He told her that the secret to a long life was to sprinkle a pinch of gunpowder onto her porridge every morning. The grand daughter followed this dictum religiously until her death at the venerable age of 103. She left behind 14 children, 30 grandchildren, 45 great grandchildren, 25 great, great grandchildren…………and a 40ft hole where the crematorium used to be. Thanks to Henry Dennett for this month’s joke. Do you have a joke to share? A Farmers Guide boot bag will be sent to anyone who gets one published in the magazine. Please send it to: dominic@ farmersguide.co.uk. ■

Pictured AG4000 Winterbourne Jacket - available in brown

WARM UP FOR

WINTER

www.dickiesworkwear.com

December 2015 www.farmersguide.co.uk

1-23 ROP Dec.indd 5

18/11/2015 09:20

The power of good

AXION 870 The new AXION 870 with a massive 295 horsepower available, takes the 800 series into a new league.

CMATIC GPS PILOT with S10 and S7 touchscreen terminal with camera port

FPT engines for high performance and low fuel consumption with 295hp* available (*with CPM)

Continuously variable CMATIC transmission 0.05 â&#x20AC;&#x201C; 50km/hr

CEBIS full colour screen with CMotion drive controller as standard

Contact your CLAAS dealer for a DEMONSTRATION today or call the CLAAS Hotline on 01284 777666. claas.co.uk/products/tractors/axion870-800

1-23 ROP Dec.indd 6

10/11/2015 15:57

Grain & Fertiliser Gossip

by Graham Henderson – graham@henders.biz

Grain Gossip With a record global wheat production so far this year, export markets remain sluggish to poor. To the end of October the UK last year had exported over 150,000t outside Europe, mainly to North Africa. This year total exports outside Europe in the same period are only 6,000t. Within Europe UK export has been very restricted due to the competitive nature of prices from Ukraine and Russia. Current UK values for feed wheat are around £105/t ex-farm for November and although the price forward for May shows around £7/t higher than this, the pessimists are predicting that this spot value of £105/t could still be with us in six months time. Looking forward, current options on November 2016 price at £120/t looks attractive to me as does a price of £130/t for May 2017. I think if I was a grower I might well sell some feed wheat forward at these options. The spot feed barley price has eased a little to around £5/t below wheat at £100/t. Malting barley sales are still difficult and contracts for harvest and forward for 2016 are hard to find at acceptable prices. Volatility of grain prices frightens both the maltsters and the brewers from making forward commitment, as has been their historic pattern over the years.

Fertiliser Fragments In the past few days both CF Fertilisers UK (formerly GrowHow) and Yara have made adjustments to their

Spot Global Grain Prices

Source: AHDB/HGCA Source: AHDB

160

LIFFE feed wheat CBOT wheat

150

CBOT maize

140 130 £ per tonne

120 110 100 90 80

spot delivery prices for ammonium nitrate and their nitrogen sulphur products to try to stimulate a market that has been reluctant to commit. Spot prices are being offered by some merchants for take now/pay next spring but these are not necessarily manufacturer supported. It is probable that a spring payment offer around £230/t for Nitram can be had onto farm with up to £3/t or so below this for December delivery. Negotiations with merchants are advised to get the best price. This situation is unique in a trade that has suffered badly due to lack of sales this season. Compound prices from CF Fertilisers have dropped by considerable amounts and are close to blenders’ prices. Whether this new policy is CFF-driven and will continue remains to be seen but it would appear that compound price lists for November are over £20/t below those of September.

ov -1 N

O ct -1

pSe

gAu

5 -1

Ju l-1

Ju n

5 r-1

ay -1

-1

ar M

-1

bFe

Ja n

ec -1 D

ov -1 N

14 p-

O ct -1

14 g-

As we run in towards the festive season I always take a good look around to see the state of fieldwork. Locally, here in East Anglia, I find much drilling has taken place although there is probably more than the usual amount of bare or undrilled land remaining. A large area of spring cereals will be put in again, perhaps even a little more than last season, and much of this will potentially be spring malting barley which is why there are few contract offers about at this time. The NFU and its members are currently very concerned about farmers’ cash flow and the current activities of the RPA in making ELS and HLS payments for this year. The RPA is currently indicating that up to 80 per cent of payments will be made on time by the end of January. Speaking at the Suffolk NFU annual county meeting recently NFU vice president Guy Smith appealed to members to embrace the new Countryside Stewardship scheme. He and the NFU are worried that there will be fewer farmers involved in stewardship schemes under the new regulations. He was also concerned about Britain’s role in Europe and the fear that we would not be on a level playing field in the future. All good sound reasons for our industry to speak out. With the chancellor asking Defra to reduce its revenue spending by 30 per cent over the next five years we are going to see some changes that will not only effect spending on agriculture directly, but also other agencies including the Environment Agency and Natural England which come under the same umbrella, and this will indirectly Affect our industry. This Government means hard business and is already showing its teeth.

Ju l-1

Putterings

Austin Healey is promoting Martin Johnson for the job in the media but I don’t think we should go back to someone who failed. I really don’t mind who it is provided they change the mindset of the team as to what type of game they play both in the forward pack and across the backs’ line. Sam Burgess has gone back to his family in Australia to re-join rugby league, and who can blame him when his club has been playing him as a back line forward and his national team as a centre? We move into the European Champions Cup this weekend so might get some good viewing especially from Toulon which continues to strengthen its squad with money. I won’t wish you all Season’s Greetings until the January edition, which is out just before Christmas, ■ but just to say ‘good farming’!

Rugby Ramblings As I predicted last month the debate on Stuart Lancaster lasted a few weeks but in the end he threw the towel in. Now the search widens to find a replacement in time for the Six Nations. It looks as though the RFU wants to go the way of all the other home nations and find someone from the Southern Hemisphere. However, most of the suggested frontrunners do not want to play ball. Who can blame them as it seems to be a poisoned chalice! I was wrong in my hope that Lancaster should stay for the Six Nations but we wait to see if any of his henchmen will remain. I am not convinced about Ian Richie being the right man in charge of the RFU and begin to wonder if Will Carling’s “BOFs” are still in charge of the ship. By the way, what is Rob Andrew doing these days apart from drawing a big salary? I still think that we should have an Englishman in charge of the England team and I believe there should probably be a place for Clive Woodward somewhere in the set up, and maybe even Johnny Wilkinson at some point in time. We have these people with a proven record at our disposal and should be prepared to use them.

- Balanced advice and quality service Graham Henderson N.D.A.

07979 537777 or 01394 286613 email: graham@henders.biz Talk m to grain e for sal Direct buying agent for pfertiliseers & u r c hase all combinable crops s

specialising in malting barley and other grains for Muntons Malt.

Direct selling agent for fertilisers trading UK solid, liquid and suspension fertiliser from UK producers and imported nitrogen. December 2015 www.farmersguide.co.uk

1-23 ROP Dec.indd 7

12R09B

16/11/2015 15:33

NEW

The choice is yours New improved DUAL PURPOSE malting barley Earlier maturing high yielding non-GN variety Under test for malt distilling and brewing

www.lgseeds.co.uk/octavia Rothwell, Market Rasen,

Tel: 01472 371471

Lincolnshire, LN7 6DT

enquiries@limagrain.co.uk

1-23 ROP Dec.indd 8

www.lgseeds.co.uk

16/11/2015 16:49

Arable

Rise in spring cropping area predicted With the winter oilseed rape area predicted to be substantially down, Dominic Kilburn gets some expert views on some of the key options and decisions to be made for spring drilling. With as much as a 15 per cent estimated reduction in the area of winter oilseed rape drilled this autumn compared with last, spring barley looks to be the front runner of the spring cropping options to fill much of the 50,000–60,000ha that will potentially become available as a result. In addition, spring beans and spring wheat look set to help out in filling the void although to a lesser extent than spring barley. Speaking in early November, those were the initial thoughts of Agrii national arable seeds manager, Barry Barker (right). “There seems to be quite a number of issues affecting growers this autumn including low grain prices and strategies to more effectively manage their grass weed control. This has led to some changes in variety choice as well as complete changes in crop choice, such as a reduction in the area of winter oilseed rape planted,” he explained. “There’s also been a small drop in the area of winter beans and winter barley, while winter wheat plantings look to be about the same. So something will have to fill the available land left over this autumn and I expect there to be a little more spring drilling compared with last season,” added Mr Barker. Looking at possible and probable spring crop options, he said the spring oilseed rape remained a relatively minor crop, principally on account of continuing poor crop

“I would expect continued demand from domestic feed mills looking for protein and this will absorb a lot of the surplus beans in the market, rather than peas, and there are also export opportunities to the Middle East,” he pointed out.

barley which, in the main, will be Concerto that has 40–50 per cent of the distilling market,” explained Mr Barker.

Spring cereals

The price for linseed is relatively attractive compared with spring OSR.

prices and flea beetle threat. Likewise, linseed was also affected by flea beetle and relied heavily on pyrethroid sprays to see it through, although its price was relatively attractive by comparison, suggested Mr Barker. Turning to pulses, and due to a big increase in the pea area last season, he said that there was currently a surplus of blue peas in the market and therefore an absence of forward contracts with good prices. “There are limited contracts for human consumption markets and, overall, I expect the pea area to be down next spring,” he added. Despite a big rise in the area put down to spring beans in 2015, Mr Barker reckoned it would be difficult to get an early estimate of the planned area. “Spring beans have always had the highest ratio of farm-saved seed to certified seed – approximately 50 per cent – and, I’d suggest, with the large amount of crop harvested this summer, there will be another big area going in again this coming spring.

Because of black-grass issues, delayed drilling has featured heavily for many growers this autumn and therefore spring wheat varieties will continue to be popular, pointed out Mr Barker – 50 per cent of which will be Mulika as growers go for the potential milling wheat premium. He said that Belepi – a soft-type suitable for feed – could potentially take 25 per cent of the spring wheat market. Offering a sowing window from October through to the end of March, Belepi is recognised as a spring wheat as far as the three-crop rule is concerned and that, combined with its perceived competitiveness against black-grass, is proving a popular choice with growers. “I can see spring wheats doing well again this season as it’s a relatively low input crop which suits at a time when commodity prices remain low. “Seed sales for this year are already ahead of where they were at this time last year but it’s too early to tell if there is going to be a short supply.” Spring malting barley varieties in England and Scotland look set to take up much of any available land come the spring; in England replacing some of the area unclaimed by winter OSR, and in Scotland land that has remained undrilled due to the delays caused by a very late harvest. “Scottish growers have an easy decision to make if they’ve run out of time with winter crops and 95 per cent of them will switch to spring

Spring barley KWS Irina offers growers good export opportunities.

“In England there will be more of a split between varieties: Propino remains the number one variety with 25–30 per cent of the market and high yielding KWS Irina, although not finding favour with the English malting market at the moment, has good export contract opportunities for growers in the proximity of southern and eastern ports.” Mr Barker suggested that RGT Planet, which is the highest yielding variety based on AHDB five§-year RL data, has received malting/brewing approval in France and is in the last stages of approval in England and Germany, as well as being tested in Denmark. “There’ll not be a large number of contracts being offered on this variety for the coming season but it’s a high yielder and a few growers will be taking a punt on it if they can and I am sure seed will sell out quickly,” he said. “In addition, there will be a little bit of Odyssey and Concerto being grown in England for malting while the remainder of the spring barley market could be made up of several feed varieties.” continued over... 12R27B

Your local Independent Seed Specialist Specialists in

■ CEREALS ■ PULSES ■ OILSEEDS ■ GAMECOVER ■ GRASSES ■ FERTILISER Conventional & Organic Seed

SPRING SEED OFFERS NOW AVAILABLE QUALITY SEED GROWERS ALWAYS REQUIRED

Please call Andrew Cooper or Dave Thacker on 01728 684180 for any help or advice Moat Farm, Moat Park, Earl Soham, Woodbridge IP13 7SR • 01728 684180

December 2015 www.farmersguide.co.uk

1-23 ROP Dec.indd 9

14/11/2015 14:29

FOR OVER 50 YEARS GREAT BRITISH FARMERS HAVE TRUSTED A BRITISH MADE FERTILISER Consistent & even spread pattern for optimum yield

The most responsive input makes you money here

Increases yield and quality

Best N source for UK conditions

Market leader for over 50 years

First class technical service, advice and delivery

600kg or 1,000kg bags

To find out more about how Nitram can support your growth targets, visit www.cffertilisers.co.uk or call 0151 357 5758.

1-23 ROP Dec.indd 10

10/11/2015 16:31

Arable ...from previous page

Good conditions Also speaking in early November, his Agrii colleague David Leaper (right) agreed that, following one of the best autumns to date, the decision to delay autumn drilling sufficiently to combat blackgrass had played into many growers’ hands while still managing to get the majority of the planned winter cropping area drilled up. “We’re now seeing quite a bit of rain across the country which will slow things up but, generally speaking, there have been very good conditions for drilling winter crops and so I don’t think there will be a vastly bigger spring acreage in 2016 compared with 2015,” he commented. “That said, the past three seasons have produced some very good results from spring crops which would have been unimaginable when growers were facing the difficult climatic conditions thrown at them back in late 2012 and early 2013,” he added. Mr Leaper said that Agrii is looking to double the contracted area grown of Budweiser-approved French spring malting barley variety Explorer following the success of crops this year. With high protein characteristics, Explorer is the only variety that currently meets Budweiser’s required specification, as brewing giant AB InBev seeks to produce more of its UK brewed Budweiser from UK-grown grain. In 2015, nearly 40 farms grew around 1,500ha (3,700 acres) of the variety on contract. “The Explorer contract was a success this year and Budweiser was pleased with the UK grown crops,” commented Mr Leaper. “Although the

total area was relatively small, we are hoping to expand that for next spring but rather than aiming for the traditional, light land spring barley growers, the Explorer contract suits heavier land for a variety that is high in protein and nitrogen to meet the specification.”

OSR down Gleadell’s seed manager, Chris Guest (left) reckons the total area growers will set aside for spring crops next year will be similar to this year, although late autumn weather and the amount of winter cereal drilling completed after sugar beet, potatoes and maize will dictate the final spring hectarage available as usual. However, he said that with the winter oilseed rape area planted this autumn predicted to be down, it would be interesting to see which crops might take its place. “We’ve seen more demand for winter beans this autumn which may take some of that area, and following a huge increase in the spring bean area last season, I can’t see that crop expanding further. “There’s continued interest in spring wheat of course and, as ever, the limiting factor for that crop is the supply of seed. “Interestingly, spring wheat seed crops have not yielded as well as commercial crops this year,” he added. On the whole demand for spring seed has been good so far this autumn, commented Mr Guest, who pointed out that a proportion of the company’s spring seed sales are driven by earlier (harvest time) committed crops and buy-back schemes through Gleadell’s Null-Lox spring malting barley contracts, as well as through its partnership with Dunns (Long Sutton) Ltd for marrowfat peas. “Generally speaking though,

demand will remain high for spring crops particularly bearing in mind the greening element of protein crops, the three-crop rule and also the opportunity they offer growers in the on-going efforts to control black-grass,” he explained. In terms of specific varietal interest, he said that Gleadell had already seen a big demand for popular spring wheat Mulika, while feed spring wheat variety KWS Kilburn, with its stand-out yield, may well be in high demand.

Planning for Planet With spring barley sales starting to take shape, Mr Guest said that top yielding malting variety RGT Planet, which was new to the fully Recommended List last autumn and scheduled to obtain IBD approval in June, will be one to watch out for. “People will want to grow it anyway for a big heap and if they can get a premium for it then all the better,” he suggested.

High yielding RGT Planet is one to watch.

Candidate spring barley Laureate – for brewing and distilling – will be grown for evaluation next spring and could be of major interest this time next year, he added. In terms of pulses, he suggested that spring bean varieties Vertigo, Fanfare and Fuego will remain the key varieties again in 2016, while stressing that any growers drilling spring beans from farm-saved seed should get them tested for stem nematode and leaf and pod spot (ascochyta) as a matter of priority. In the blue pea sector variety Campus takes the standing ability of peas to a new level, which is one of the

SUPPLY INSTALLATION MAINTENANCE REPAIR

Industrial Doors Ltd

biggest concerns for some growers, and although seed availability is limited this season it looks set to be a popular variety, concluded Mr Guest.

Spring wheat interest The development of high-yielding spring wheats with the flexibility to be sown through the autumn and into March has re-ignited interest in the crop, but drilling date and variety choice are fundamental to performance, said KWS product development manager John Miles. “With yields often close to the late-sowing winter types, but with better specific weights, spring wheat is a genuine option for those wanting to control problem weeds through delayed drilling or simply wanting to spread the workload through the season,” he pointed out. “For the majority of growers, farm situation will determine variety choice with drilling date and storage availability the main considerations. KWS Willow is a Group 2 wheat that performs best when sown in late autumn, but with the flexibility to drill through to the conventional spring period. Because crop protection rules are set by drilling date – 1st February being the change-over day – autumn sown spring wheats have the same herbicide options available as winter wheats,” he said. “Those who want a high-yielding Group 4 should consider KWS Alderon. It offers similar drilling date flexibility to KWS Willow, but without the need to store separately. Both offer good allround disease resistance and standing ability so will sit nicely on any farm. A third alternative is Group 1 candidate KWS Mullins. It’s a little lower yielding than either Willow or Alderon in the late autumn slot, but comparable with both when sown in the spring. It’s also a few days earlier to mature which is a trait we are intentionally selecting for.” For those wanting a true spring continued over...

t: 01277 523696 m: 07803 875617 12R02B

Specialists in agricultural doors Roller shutter doors Sectional overhead doors Folding shutter doors Sliding doors Steel doors e: enquiries@gtindustrialdoors.co.uk

Reliable professional support 24/7

www.gtindustrialdoors.co.uk

December 2015 www.farmersguide.co.uk 11

1-23 ROP Dec.indd 11

14/11/2015 14:30

...from previous page

wheat (sown after February) then KWS Kilburn is the ideal choice, said Mr Miles. “It is the highest yielding spring wheat for the spring period and has an outstanding agronomic package combining excellent all-round disease resistance, especially to brown rust (9). It offers tall, stiff straw and is a strong tillerer. As a feed wheat it can be added to the heap without issue while its yield and straw make it the obvious choice for those with livestock.”

he added. He said that Propino would remain the number one spring malting barley variety with newer varieties KWS Irina and RGT Planet “muscling in” on

some of its market share. “Propino and KWS Irina will be key for us ahead of spring planting and we’ll have a good look at RGT Planet to see how it performs,” he continued.

“With an increasing amount of cover crops going in the ground this autumn, it’ll also be interesting to see their affect on following spring crops,” said Mr Cooper. ■

Exciting spring barleys offer opportunity As the breeders of the only two varieties on the 2015 Recommended List with full IBD approval for brewing and distilling, Concerto and Odyssey, Limagrain UK believes that the focus on producing non-GN spring barley varieties that meet this dual requirement has benefitted growers by offering security in marketing options. “It is important that the varieties we bring to the market can be used in distilling as well as for domestic brewing and export,” said Limagrain senior barley breeder, Mark Glew. He explains that varieties suitable for malt distilling should be below 1.65 per cent nitrogen, and non-GN, while grain with nitrogen levels from 1.70–1.85 will meet brewing requirements – growers should be aware of what markets they are growing for to achieve the additional premiums that are obtainable over standard feed price. Non-GN varieties include the version of a gene that makes them non-producers of the compound

Good supplies Suffolk-based seed specialist Walnes Seeds provides a comprehensive range of crop varieties suitable for spring sowing throughout eastern, central and southern England. Managing director, Andrew Cooper reckoned he’ll know more by mid-December as to which varieties are proving popular as a spring option for 2016 planting but, currently, seed supplies for most crops look good. “The desire for some growers to reduce their acreage of winter oilseed rape over the past two seasons has opened the door for protein crops such as spring beans and we are now seeing Vertigo and Fanfare – which take yields on to a new level – taking a larger chunk of Fuego’s diminishing market share. “They will also make markets for human consumption in most cases,”

glycosidic nitrile. “It’s a tiny piece of DNA, but it makes those particular varieties suitable. There are only a few of them, but they’re the ones that are tested and supported by the distillers.” This pipeline of varieties from breeders Limagrain UK continues to bring new varieties to the market with flexible marketing options and improved agronomics. Last year saw the recommendation of three new non-GN varieties all of which offer even higher yields and a range of attributes that suit different situations and markets. “The first of these, Sienna is an exciting variety offering a higher yield than Odyssey,” said Limagrain’s technical arable manager, Ron Granger. “Its robust disease resistance profile underlines its high untreated yields.” Sienna has the best specific weight on the HGCA RL, a valuable trait desired by the industry. In addition the variety also exhibits many of the positive traits associated with the feed variety Westminster,

To be totally Accurate !

Octavia is another high yielding nonGN variety.

offering livestock farmers a high yielding alternative. “Octavia, another high yielding non-GN variety, has IBD provisional approval for malt distilling and brewing, yielding 104 per cent over control in the 2015 AHDB spring barley Recommended List trials.” Agronomically Octavia offers a very sound package; it is a variety that helps to spread the ripening across the farm as it is earlier ripening than Concerto, so should be particularly attractive to northern growers. It is short strawed with good ratings for rhynchosporium and ramularia, he adds.

KRM’s KRM’s double, double, double double overlap overlap spread spread and exclusive Trend headland headland system system are are widely widely acknowledged acknowledged to to offer offer precise precise spreading spreading .. .. backed backed by by outstanding outstanding results results from from independent independent international international tests. tests. Combined Combined with with weigh weigh cell cell technology technology to to give give spreading spreading accuracy accuracy of of +/+/- 1% 1% even even when when working working on slopes, KRM Spreaders are are unbeatable unbeatable in in making making the the best best use use of of every every kilo. kilo. And And now, now, Section Section Control Control ensures ensures the the most most accurate accurate application application over over field area area even even when when the the total total field working working in in irregular irregular shaped shaped fields. fields. Section Section Control Control can can be be operated manually manually or or automatically automatically by by GPS, GPS, ISObus ISObus or or by by Tablet. Tablet.

AutoSwitch

Tablet PC

Tel: 01423 324221

ISObus

So, So, to to be be totally totally Accurate Accurate .. .. choose choose KRM KRM !!

E mail: info @krm-ltd.co.uk

12 www.farmersguide.co.uk December 2015

Latest Charts on www. krm-ltd.co.uk

DER N U

TEST

MALTING SPRING BARLEY

RGT PLANET A new world! w w w. r a g t s e e d s . c o . u k

RA GT S e e d s Ltd • Gr an g e R o ad • I ckl et o n Essex • CB101TA • 01799 533700 • enquiries@ragt.fr

1-23 ROP Dec.indd 13

12/11/2015 17:01

FINANCE* OPTIONS

1+3 ANNUALS @ 0% 1+4 ANNUALS @ 0.5% (Valid to 30/09/2015. Ask for details)

www.facebook.com/mccormickagriuk

@mccormickagriuk

. Finance is subject to status and is for business users only. All applicants must be over 18 years of age.

AGRI_345_McCormick 1-23 ROP Dec.indd 14X7 Series FG Selected.indd 1

14/07/2015 16:59 08:53 12/11/2015

Arable Laureate is a true dual-purpose variety to suit brewing and distilling markets.

Dual-purpose barley refreshes the markets other varieties cannot reach The trend of high yielding spring malting barley varieties suited for both brewing and distilling sectors looks set to gain momentum as new RL entrants come to the fore. Dominic Kilburn reports on one variety that will interest growers north and south of the Scottish border. A new malting spring barley variety looks set to deliver high yields and quality suitable for both the brewing and distilling markets. Laureate, a Candidate variety in 2015, (expected to become fully recommended on the AHDB RL in early December) is equally suited to Scottish growers and their end market as it is for growers in England, says breeder Syngenta. Speaking at an event in early November, Syngenta’s head barley breeder, Paul Bury (right) said that the yield gap between pure brewing and distilling varieties had become much bigger in recent years which was not good for the industry. “There is a need for consistent performing and high yielding varieties for both sectors, and that’s what Laureate is,” he added. “For us, ‘dual-purpose’ is not just about the quality requirements of a specific market but it’s about meeting the requirements of growers in those markets.

“We have shown we can develop varieties across international markets and we fully expect Laureate to follow in the footsteps Tipple, Quench and Propino in that regard. “For UK growers the performance of Laureate in the UK is key, but if a variety is adapted to a wide range of soils and climates, that adds to its stability, and, in the case of Laureate, its European stability looks strong,” he explained. According to Mr Bury, Laureate, which is a nonGN variety, is the highest yielding of any malting barley varieties in RL trials when taking the five year mean yields into account and, if fully recommended to the new Recommended List at the beginning of December, it should go on as the highest yielding dual-purpose variety, he said. “Laureate has closed the yield gap between brewing and distilling varieties, becoming the highest yielding variety for the AHDB’s ‘North region’ and Scotland, which is

something growers have been lacking there for distilling markets, and it is also great news for traders and distillers. “It also performs very well in the East for brewing where it is the joint highest yielding variety,” he added. As well as its excellent yield traits, Mr Bury said that Laureate had very good all-round disease resistance including the highest untreated yield of any spring barley in RL trials, and that it was particularly robust against late season disease. “With medium straw length, Laureate doesn’t have significantly different characteristics to what farmers have been growing in their fields. However, we are working on a large number of trials so that we will have as much information on seed rates and agronomic advice as possible for when growers want to try it.” Syngenta seed and seed treatment manager, Samantha Brooke added that Laureate would undergo IBD testing in 2016 with a view to getting full IBD approval in 2017. “We have a large production of seed for 2016, with in excess of 6,000t produced this year. “It’s important that growers stick with what they know, such as a Propino or Concerto, and, initially, try a smaller area of a new variety like Laureate,” she suggested.

Malting market Also speaking at the event was Gleadell Agriculture’s malting barley

trader and sales director, Stuart Shand (left). He admitted that 2015 had been a challenging year for the malting barley market but there were reasons for growers to remain optimistic. A combination of factors including record yields, two big crop carry-overs, a larger spring cropping area and a 750,000t exportable surplus, meant that there was a glut of barley and over-supplied markets at a time when demand from countries such as China, Brazil and Russia was down. “There is, however, a 3 per cent year-on-year increase in barley demand and both brewers and distillers in the UK forecast growth,” he explained. “There will be big malt and barley stocks going into harvest 2016 and if growers are not on some sort of contract with a spring malting barley crop then they are gambling on a crop failure somewhere,” he warned. According to Mr Shand, with plenty of volatility in markets, more and more growers were leaving their crop marketing to others. “It’s a general trend we are seeing, with more growers in pools and managing their risk with the tools that are available. “There are numerous malting contract options, such as ‘premium over wheat futures’, but they need to pick the pool that suits their business best,” he added. ■

What is a dual-purpose variety? Laureate for Distilling: • The highest yielding variety for Scotland and the North region • High spirit yield equal to Concerto • Non-GN (suitable for distilling) Laureate for Brewing: • Joint highest yielding in the East region • High hot water extract • Good malting profile which fits the demands of brewers and maltsters 12R48B

Norfolk Straw Products Ltd Straw Merchants

STRAW REQUIRED Big Hesstons – 3/4 Hesstons Quadrants – Mini Hesstons

Wheat, OSR & Barley Straw

Contracts available: 1 year Rolling Contract – 3 year Straight Contract

www.norfolkstraw.co.uk

Contact Office 01362 693398 Stephen mobile 07767 803269 email enquiries@norfolkstraw.co.uk December 2015 www.farmersguide.co.uk 15

08:53

1-23 ROP Dec.indd 15

16/11/2015 16:58

Arable

Field f cus With their planned area of winter cropping safely in the ground and herbicide applications having mostly gone to plan, our agronomists are considering field recommendations for the final treatments of the calendar year. Dominic Kilburn writes.

Following a good October for drilling, most growers have drilled what they wanted to, said Nottinghamshirebased AICC and Arable Alliance agronomist Andrew Wells speaking on the 9th November. Maize harvest, however, had caused some drilling delays with crops not reaching the stage maturity required by growers. Andrew commented that, in general, black-grass control in wheat had gone quite well, with more growers intentionally delaying their drilling to gain better control. “With the benefit of hindsight, some could have delayed another 10 days or so as a later flush of black-grass came through with the early to mid October-drilled crops and a lack of moisture during that month reduced the initial effectiveness of the pre-em stack. “Early November has seen an increase in rainfall and the pre-em actives have started to work better, but it will be imperative to get the post-emergence application on pre-Christmas to reduce black-grass numbers further,” stressed Andrew. He said that Atlantis or Horus (iodosulfuron + mesosulfuron) will still be the mainstay of post-em treatments on wheat but prosulfocarb tends to be the product partner of choice,

Western England

providing more consistent activity than other partners. “I haven’t recommended the use of prosulfocarb at any pre-em timing,” he added, pointing out that some growers will put flufenacet + pendimethalin in the post-em mix depending on which weeds are coming through. According to Andrew, the oilseed rape area is down slightly in the region, but not significantly and there have been no real problems with flea beetle in his clients crops. Clethodim herbicide applications that were applied two to three weeks previously appear to be giving good, but not perfect, grass weed control and propyzamide recommendations have been made, ready for applications from late November through December – a month’s window of opportunity if soil temperatures cool sufficiently, pointed out Andrew. At the time of writing, no phoma thresholds had been met in clients’ crops and so planned propyzamide treatments will be tank-mixed with a fungicide for phoma control this autumn, with Andrew suggesting that due to the large size of many crops and the late appearance of phoma, yield responses to autumn fungicides would be small this year. In terms of growth regulation, and despite some crops already being at knee height, Andrew said that he’ll wait and see what the winter, and then pigeons, bring before making any decisions. “If we can manage crop height by nitrogen timings and

Likewise in the west of England it’s been a “fairly kind” autumn, said Herefordshirebased Hillhampton Technical Services agronomist, Antony Wade, who reckons that most of what was planned to be planted was now in the ground with the exception of some wheat following late harvested maize. Also speaking on 9th November, Antony suggested the recent rainfall would mean that a spring crop would now likely follow any maize that remained. “Early planted wheat, oilseed rape, barley and oat crops are all sprayed up with residual herbicides, but on later planted wheat where annual meadow-grass and broad-leaved weeds dominate these will be taken care of this side of Christmas if we get a weather window, or in the spring with contact chemistry,” he commented. “We just need to get a fungicide on the OSR with phoma having only just reached threshold levels. I’ve held on to be able to do a single spray in the autumn – using penthiopyrad + picoxystrobin (as in Frelizon or Refinzar) for light leaf spot and phoma control as well as for root enhancement for slightly backward crops, but for varieties such as Charger that are weak on LLS, then they’ll get prothioconazole.” Antony said that he’d been wondering whether growers would

PROTECH MACHINERY

SBS Spares Ltd

P22 TRACKED POST DRIVER A ONE MAN FENCING MACHINE – SAVE LABOUR, FUEL AND TIME!

12R05B

Valley Farm Pit, Hadleigh Road, Sproughton, Ipswich, Suffolk IP8 3EN Commercial Vehicle Dealers and Dismantlers

Used commercial from vans to tractor units. Always a large stock of 7.5 ton Tippers, Flats, Boxes etc. Box bodies for storage from 10ft to 40ft also containers, Artic Trailers, Flats, Step Frame Boxes and Fridges. Axle wheels, tyres, springs, rams, power packs, engines etc. Artic back end 5th wheel bogies and tipping bodies. Artic tankers, fuel bowsers, low loaders, compressors. Please phone with your requirements and we’ll try to help.

FOR PROTECH SALES PLEASE CALL

REDUNDANT LORRIES & MACHINERY ALWAYS WANTED

Andrew 07971 079751•Steve 07974 956716 PROTECH MACHINERY LTD

Fax: 01473 652467

Email: sbssparesltd@btconnect.com www.sbssparesltd.co.uk

• 250kg hammer weight • 800mm telescopic sideshift • compact for transport • rock spike and hydraulic extractor option • telescopic mast option for 10ft posts

SPECIALISTS IN USED SPARES

Tel: 01473 652454

be able to combine OSR propyzamide treatments with the phoma fungicide but warm temperatures have put paid to that. “We will need to go with a separate spray for propyzamide in December, which is often the case,” he added. According to Antony, the exceptionally mild and moist weather in the first part of November has meant that slug activity has increased and pellets will have to be applied to some of the October planted wheat. These will be ferric phosphate-based now to avoid metaldehyde losses into watercourses in the wetter conditions. Cover crops are increasingly popular in the region, he said, as growers look for increased nutrient capture as well as to address issues with soil erosion on over-wintered stubbles. “They are certainly the buzz word at the moment and a lot of people are interested in them. The ones we planted went in the ground in early September following wheat ahead of spring cropping. Sowing date was later than ideal but in what has been an open autumn, they have established well. A black oat and berseem clover mix was selected for nutrient capture, soil structure benefits and reducing overwinter soil erosion, but also being easy to destroy in the spring. “My concern this year is for those fields left undrilled after late-lifted maize. In this area nutrient loss in rivers is a key issue and it’s very important that growers realise the soil erosion and nutrient loss that occurs over winter and that they try and do something about it. They must comply with the standards of Good Agricultural and Environmental Condition (GAEC),” he reminded readers. *Antony can be contacted on 07973243590 or on Twitter: @ HTSagronomy. ■

Vis it o fu ur w ll p e rod bsi uc te t tr os an ee ge ou r

Notts and Lincs

tebuconazole in the spring, rather than a PGR now, then that will be the preferred option. “The aim is not to have to spend money if you don’t have to,” he concluded.

Woolridge Farm, Gloucester Road, Hartpury, Gloucestershire GL19 3BG British Built at Unbeatable Prices

e-mail: sales@protechmachinery.co.uk www.protechmachinery.co.uk

12R18B

16 www.farmersguide.co.uk December 2015

1-23 ROP Dec.indd 16

14/11/2015 14:29

AS16

ONLY ONE CAN

TAKE THE LEAD IT Y CONNECTIV INSIDE

8370R DRAWBAR POWER 250

246

224 200 kW

8370R AutoPowr*

Competitor 1**

Competitor 2***

*Nebraska OECD Test 2102 http://tractortestlab.unl.edu **Profi 8.2013 *** Profi. 8.2015

242

225

The 8370R (Stage IV) has set the new benchmark with an outstanding drawbar performance of 246 kW*. This is an up to 10% higher output than itâ&#x20AC;&#x2122;s competition*** and means up to 10% more field worked within the same time. Also, our new Connectivity Package offers everything you need to get the most out of your John Deere tractor: Reduced overlap, improved machine performance and easy to manage jobs with myJobsConnect.

JohnDeere.com

AS16090.1ENG_GB

Be efficient. Be connected.

Nothing runs like a Deere!

1-23 ROP Dec.indd 17 AS16090_1_ENG_GB_Farmers Guide_dispatch.indd 1

10/11/2015 16:19 11/4/15 11:28 AM

www.he-va.co.uk

KING ROLLER

brand

Cover more acres faster than ever and achieve even consolidation across the field

Independent flotation and central pivoting of each section ensure superb contour following and even weight distribution from 12.3m to 20.3m working widths. Floating wings and Centre Pivots - Superb contour following.

AS GOOD AS IT LOOKS Rolls + Shattaboard

Front Press

Disc Roller + Combi Lift

Combi Disc

Euro Tiller

Accu Disc

Triple Tiller

Subsoiler

Disc Roller

Hydraulic SAT system - weight transfer for even consolidation across the width. 3m Transport width and Hydraulic Brakes standard - Simple safe road transport. Heavy duty design throughout - built for high workloads and to last. Heavy duty rings in 21â&#x20AC;? or 24â&#x20AC;? - Cambridge and Breaker or Cambridge only. Best known for producing one of the most advanced high quality sets of rolls available which have been used by UK growers over 20 years. HE-VA continue to make and develop machines with the aim to increase work rates and improve soil condition to suit the need of individual farms in the UK and across the world.

OPICO Ltd. Tel: 01778 421111 Email: ask@opico.co.uk Web: www.he-va.co.uk

2015KingRollerRangeA4FarmersGuide.indd 1 1-23 ROP Dec.indd 18

06/11/2015 10/11/2015 09:51 16:15

Arable

AGRONOMY UPDATE Late weed control in oilseed rape is running several weeks late due to the warm weather, says Agrovista agronomist Craig Green (left). Many growers have rightly delayed applying propyzamide to control black-grass in oilseed rape as soil temperatures have been too high for effective control, says Craig. However, weeds have continued to grow strongly in the unusually warm autumn so any temptation to cut rates should be avoided, he advises. Soil temperatures need to be at or preferably below 100C for optimum control, but at the time of writing (early November) they were still well above that level with a further week of warm weather to come. “You’d think with all the rain we’ve had that soils would have cooled more than they have,” says Craig. “Applications are going to be at least three weeks later than normal to ensure soils are cool enough to provide sufficient activity.

Propyzamide breaks down more slowly at lower temperatures, so it remains in the soil for longer. Weed growth is also reduced. “The cooler soils are, the better the active will work. However, given the ideal growing this autumn, blackgrass is generally bigger than usual so full-rate applications are a must as efficacy starts to decline once plants begin to tiller.” Mild weather has also encouraged more aphid activity than usual for the time of year, raising the threat of turnip yellows virus, Craig notes. “It will be worth adding an aphicide such as Biscaya (thiacloprid) when going through with Kerb if any aphids can be seen in the crop. “Given the lateness of the timing growers might be tempted to tank mix with other products that are due to be applied. However, they’ll need to check compatibility – Biscaya cannot be mixed with Frelizon (penthiopyrad + picoxystrobin), which may well be earmarked to control phoma/light leaf spot. Other products such as Falcon (propaquizafop) to take out cereal

volunteers and trace elements such as boron or manganese are also likely to be used at this time. “I would apply the Frelizon, Kerb and Falcon in one application and the aphicide and trace elements separately. You can’t do everything at once.” Maize growers may need to review their variety mix after this season’s “distinctly average” yields, says Craig. “Crops have been reasonably tall but have matured more slowly than usual due to the cool wet summer. A lot of late varieties have been grown in the east as crops usually drought out, so people are chasing maximum yield. However, these later types have really suffered this year – they have not had enough heat units to mature.” In Agrovista trials of 56 maize varieties at Great Ellingham, Norfolk, around 30 per cent of late varieties did not reach full maturity. “The cob accounts for about 40 per cent of yield – usually it’s a case of the more cobs the better in our drier climate. This season those varieties that

put out more than one cob really struggled,” says Craig. “Yields have still been decent because of the amount of growth, but energy/gas potential and dry matter will suffer as a result,” he adds. To help avoid a repeat of this problem, growers might be better introducing some earlier/ mid maturing varieties into their portfolio, he advises. “Earlier varieties could be grown on poorer land, where they often do better than higher-yielding types. Varieties like Emblem, Cathy, Hobbit and Eurojet have performed particularly well at Great Ellingham this season, producing top yields on lighter soils and the highest cob weights,” says Craig. “Growing a mix of early, intermediate and late varieties also helps spread the harvest workload,” he adds. “Harvest can start in September rather than mid-October or later. *Craig Green is an agronomist with Agrovista, based at Great Ellingham, Norfolk (Craig.Green@ agrovista.co.uk).

Biobed alternative reduces sprayer pollution risk A new advanced form of biobed introduced to the UK, could help sprayer operators more efficiently manage spray residues and reduce the risk of point source pollution, particularly where filling is done at the home base rather than via bowsers. That’s according to Bayer CropScience, which launched its Phytobac system in early November. Studies had shown that between 40– 70 per cent of all pesticides in water came from point source pollution around the sprayer filling area – much of which was easy to trace and prevent, independent consultant, Bill Basford said at a press briefing. One solution was to install a bioremediation system, such as a Phytobac or biobed, which have shown to reduce pesticide residues in contaminated water by 100,000 fold, he explained. They worked through a combination of bacterial activity, natural degradation and light breaking down the chemicals in water. The Phytobac is a sealed container made from waterproof concrete, metal or plastic, and filled with a bio mix of 70 per cent topsoil and 30 per cent chopped straw, he said. “It is a high quality

build as it must be sealed properly with no leaks.” A buffer tank collects the contaminated water from the bunded spray fill area, which is then drip irrigated onto the Phytobac. One appealing difference from a traditional biobed is that it is designed to be a closed system so no liquid is discharged from the unit at the end of bioremediation. It can handle a maximum of 15,000-litres/year of waste spray washings, the same as a biobed, and wash down liquids with an Environment Agency exemption. “It is important to know the amount of contaminated water you will be dealing with, and take every effort to minimise that,” said Mr Basford. This means ideally, it needs to be used in conjunction with a covered spray filling area. “The Phytobac is roofed too to prevent rainfall entering the system, and to enhance evaporation, but the roof needs to be removable to allow topping up and/ or turning of the biomix once a year.” Phytobacs were initially developed by Bayer CropScience in conjunction with INRA – the national institute for agricultural research in France – and there are now around 3,000 in operation across Europe, Bayer’s application and stewardship

p The Phytobac is roofed to prevent rainfall entering the system, and to enhance evaporation. u Contaminated water is drip irrigated onto the Phytobac.

co-ordinator Alice Johnston said. “To help growers decide whether a Phytobac is right for their situation we have produced two manuals and a calculator, which are accessible from the Bayer website. “And we have developed the Phytobac Calculator to help with sizing on individual farms as this can differ depending on location and amount of water used, and where it is sited on the farm,” she added. ■ December 2015 www.farmersguide.co.uk 19

09:51

1-23 ROP Dec.indd 19

14/11/2015 14:36

HEAVY DUTY PETROL POWER WASHERS GREAT FOR REMOTE LOCATIONS CAN DRAW OWN WATER

FREE 500 PAGE

FROM ONLY

.00 199EXC.VAT £ .80 238INC.VAT £

65SUPERSTORES NATIONWIDE

NEW RANGE

PRESSURE ENGINE EXC. MODEL BAR/PSI HP VAT Tiger1800 110/1595 2.6 £199.00 Tiger2600 170/2465 4 £259.98 Tiger3000 200/2900 6.5 £329.98 PLS195 186/2698 6.5 £399.00 PLS265 260/3770 13 £599.00

INC. PLS195 VAT £238.80 £311.98 Honda & Diesel £395.98 engine models £478.80 available £718.80

TURBO FAN GAS HEATERS

Offering low cost, efficient heating

DIESEL/ PARAFFIN HEATERS

PRICE CUT

PROPANE NOW FROM GAS £ .99 EXC.VAT FIRED

64 77.99

Ideal for fast efficient heating MAX Extra-long run MODEL OUTPUT fuel tanks – up XR60 14.7kW to 53L Variable XR80 20.5kW heat output with XR110 29.3kW thermostat XR160 46.9kW control XR210 61.5kW

EXC.VAT £179.98 £229.98 £279.98 £329.98 £369.98

INC.VAT £215.98 £275.98 £335.98 £395.98 £443.98

LOG BUSTERS The fast easy way for consistent and accurate log splitting FROM ONLY

.98 109EXC.VAT .98 131INC.VAT

LOG * manual BUSTER 7 † 6.5 HP Petrol driven SPLITTING SPLITTING LENGTH FORCE MODEL (mm) (Tonnes) EXC.VAT INC.VAT Log Buster 4* 444 10 £109.98 £131.98 Log Buster 7 370 4 £164.99 £197.99 Log Buster 5 520 4 £189.98 £227.98 Log Buster 6 1050 5.5 £365.00 £438.00 Log Buster 8† 510 10 £549.00 £658.80 • Auto ON/OFF float switch HUGE CHOICE INC. BOOSTER PUMPS IN STOCK NOW

SEATS

FLUES, COWLS & ACCESSORIES IN STOCK 11.8kW

Hard wearing, versatile and comfortable. For PRICE CUT use on various £NOW FROM .98 Tractors 39EXC.VAT and lawn £ .98 47 INC.VAT mowers WAS £53.99 inc.VAT

POT BELLY

BARREL

TS1 PRODUCT DESCRIPTION EXC.VAT INC.VAT Clarke TS5* Moulded seamless £39.98 £47.98 cushion Clarke TS1# Adjustable backrest £59.98 £71.98 & high quality suspension *was £53.99 inc.VAT # was £83.98 inc.VAT

89EXC.VAT 107.98 INC.VAT £

.98

FROM ONLY

.98 29EXC.VAT £ .98 35INC.VAT £

JUMP STARTS

EXTRA LONG 1m LEADS

HIGH AND COMMERCIAL VEHICLES

CFT5

169EX.VAT .98 203INC.VAT

.98

MODEL

LIFTS

UPTO 720mm

ENGINE BAR MODEL SIZE LENGTH GH-PC153TC 41cc 350mm CS360T 36cc 350mm BG-PC 2245 50cc 450mm CS400T 40cc 400mm

CFM TANK 7.5 24ltr 7 24ltr 9.5 24ltr 7.5 50ltr 9.5 50ltr 14.5 50ltr 14.5 100ltr

‡ V-twin EX VAT INC VAT £79.98 £95.98 £89.98 £107.98 £119.98 £143.98 £129.98 £155.98 £149.98 £179.98 £219.98 £263.98 £269.98 £323.98

INC.VAT £119.98 £167.98 £191.98 £203.98

MIG WELDERS MODEL VOLTAGE PTO13/2 230V PTO20/2 230V PTO26/2 230V PTO19/2 400V PTO30/2 400V PTO40/2 400V PTO60/4 400V PTO70/4 400V

FROM ONLY

.98 179EX.VAT .98 215INC.VAT

LOW LIFTS FROM 63mm

MODEL MIN-MAX AMPS EXC.VAT INC.VAT PRO90 24-90 £179.98 £215.98 110E 30-100 £214.99 £257.99 135TE Turbo 30-130 £239.98 £287.98 151TE Turbo 30-150 £269.98 £323.98 165TEM Turbo 30-155 £339.00 £406.80 175TECM Turbo‡ 30-170 £399.00 £478.80 205TE Turbo# 30-185 £429.00 £514.80 ‡ was £490.80 inc.VAT # was £539.98 inc.VAT .99 45EXC.VAT £ .19 CFJ48 55INC.VAT £

VISIT YOUR LOCAL SUPERSTORE EXETER 16 Trusham Rd. EX2 8QG 01392 256 744 GATESHEAD 50 Lobley Hill Rd. NE8 4YJ 0191 493 2520 GLASGOW 280 Gt Western Rd. G4 9EJ 0141 332 9231 GLOUCESTER 221A Barton St. GL1 4HY 01452 417 948 GRIMSBY ELLIS WAY, DN32 9BD 01472 354435 HULL 8-10 Holderness Rd. HU9 1EG 01482 223161 ILFORD 746-748 Eastern Ave. IG2 7HU 0208 518 4286 IPSWICH Unit 1 Ipswich Trade Centre, Commercial Road 01473 221253 LEEDS 227-229 Kirkstall Rd. LS4 2AS 0113 231 0400 LEICESTER 69 Melton Rd. LE4 6PN 0116 261 0688 LINCOLN Unit 5. The Pelham Centre. LN5 8HG 01522 543 036 LIVERPOOL 80-88 London Rd. L3 5NF 0151 709 4484 LONDON CATFORD 289/291 Southend Lane SE6 3RS 0208 695 5684 LONDON 6 Kendal Parade, Edmonton N18 020 8803 0861 LONDON 503-507 Lea Bridge Rd. Leyton, E10 020 8558 8284 LONDON 100 The Highway, Docklands 020 7488 2129 LUTON Unit 1, 326 Dunstable Rd, Luton LU4 8JS 01582 728 063 MAIDSTONE 57 Upper Stone St. ME15 6HE 01622 769 572 MANCHESTER ALTRINCHAM 71 Manchester Rd. Altrincham 0161 9412 666 MANCHESTER CENTRAL 209 Bury New Road M8 8DU 0161 241 1851 MANCHESTER OPENSHAW Unit 5, Tower Mill, Ashton Old Rd 0161 223 8376 MANSFIELD 169 Chesterfield Rd. South 01623 622160

FROM ONLY

INDUSTRIAL AIR COMPRESSORS

Offers the durability & reliability demanded by professionals. • Cast iron pumps H/DUTY on SEV11C, SE16 and SE19 • Twin cylinder pumps (except SE11) • Motor overload protection • Petrol models available CFM MOTOR RCVR MODEL (HP) (LTR) EXC.VAT INC.VAT SEV11C* 9 2 100 £369.98 £443.98 SE16C100* 14 3 100 £399.00 £478.80 SE16C150+ 14 3 150 *£429.00 £514.80 SE16C200+ 14 3 200 ‡£499.00 £598.80 SE18ǂ 18 4 200 ^£549.00 £658.80 SE26^ 23 5.5 200 £679.00 £814.80 SE29+◊† 28 2x3 270 £969.00 £1162.80 SE36^● 30 7.5 270 £979.00 £1174.80 SE37+◊† 36 2x4 270 £1099.00 £1318.80 SE46#^ 40 10 270 £1449.00 £1738.80 *230V Supply +Run From 30 Amp Supply ‡Run From 40 Amp Supply ^400V 3 Phase •Supplied With Direct On-Line Starter ◊Supplied With Sequential Direct On-Line Starter †V-Twin #Supplied With Pre-Wired Star Delta Starter *was £526.80 inc.VAT ‡was £622.80 inc.VAT ^was £682.80 inc.VAT was £826.80 inc.VAT was £1798.80 inc.VAT

PRICE CUT NOW FROM

KVA EXC.VAT WAS INC.VAT INC.VAT 13 £1195.00 £1462.80 £1434.00 20 £1449.00 £1798.80 £1738.80 26 £1795.00 £2254.80 £2154.00 19 £1395.00 £1726.80 £1674.00 30 £1695.00 £2157.80 £2034.00 40 £1995.00 £2470.80 £2394.00 60 £2995.00 £3718.80 £3594.00 70 £3195.00 £3958.80 £3834.00

HEAVY DUTY INSTANT GARAGES/WORKSHOPS

IDEAL ALL-WEATHER PROTECTION

• Ideal for use as a garage/workshop • Extra tough triple layer weatherproof fabric • Heavy duty powder coated steel tubing • Ratchet tight tensioning ZIP CLOSE DOOR

MODEL CIG1015 CIG1216 CIG1020 CIG1220 CIG1224

INC.VAT £107.98 £179.98 £227.98 £287.98 £442.80 £574.80 £682.80

.00 1195EXC.VAT £ .00 1434 INC.VAT WAS £1462.80 inc.VAT £

EXC.VAT £89.98 £149.98 £189.98 £239.98 £369.00 £479.00 £569.00

.98 369EX.VAT .98 443INC.VAT

Continuous rated alternator Oil bath PTO gearbox with shaft guard Control box with meters for Volts, Amps and frequency Overload protection CE sockets to BS4343.

.98 99EXC.VAT £ .98 119INC.VAT

Quality machines from Britain’s leading supplier See online for included accessories

CAP. SADDLE HEIGHT EXC. INC. TONNES (mm) MAX (mm) VAT VAT CT3000G 3 120 520 £84.99 £101.99 CTJ3000QL 3 195 520 £44.99 £53.99 FARM JACKS CTJ3QLG 3 145 500 £83.99 £100.79 • Max Load 2000kg CFT5 5 63 720 £169.98 £203.98

BARNSLEY Pontefract Rd, Barnsley, S71 1EZ 01226 732297 B’HAM GREAT BARR 4 Birmingham Rd. 0121 358 7977 B’HAM HAY MILLS 1152 Coventry Rd, Hay Mills 0121 7713433 BOLTON 1 Thynne St. BL3 6BD 01204 365799 BRADFORD 105-107 Manningham Lane. BD1 3BN 01274 390962 BRIGHTON 123 Lewes Rd, BN2 3QB 01273 915999 BRISTOL 1-3 Church Rd, Lawrence Hill. BS5 9JJ 0117 935 1060 BURTON UPON TRENT 12a Lichfield St. DE14 3QZ 01283 564 708 CAMBRIDGE 181-183 Histon Road, Cambridge. CB4 3HL 01223 322675 CARDIFF 44-46 City Rd. CF24 3DN 029 2046 5424 CARLISLE 85 London Rd. CA1 2LG 01228 591666 CHELTENHAM 84 Fairview Road. GL52 2EH 01242 514 402 CHESTER 43-45 St. James Street. CH1 3EY 01244 311258 COLCHESTER 4 North Station Rd. CO1 1RE 01206 762831 COVENTRY Bishop St. CV1 1HT 024 7622 4227 CROYDON 423-427 Brighton Rd, Sth Croydon 020 8763 0640 DARLINGTON 214 Northgate. DL1 1RB 01325 380 841 DEAL (KENT) 182-186 High St. CT14 6BQ 01304 373 434 DERBY Derwent St. DE1 2ED 01332 290 931 DONCASTER Wheatley Hall Road 01302 245 999 DUNDEE 24-26 Trades Lane. DD1 3ET 01382 225 140 EDINBURGH 163-171 Piersfield Terrace 0131 659 5919

.98 79EX.VAT 8/250 .98 95INC.VAT

MODEL MOTOR Tiger 8/250 2HP Tiger 7/250 2HP Tiger 11/250 2.5HP Tiger 8/510 2HP Tiger 11/510 2.5HP Tiger 16/510‡ 3HP Tiger 16/1010‡ 3HP

HP 6.5 7 8 11 13

£ .99 Ammeter 47EX.VAT Multi-position £ .59 57 INC.VAT charge regulator Overload protection on charging cycle BC520N MODEL MAX AMPS CHARGE/BOOST EXC.VAT INC.VAT BC100N 15/100 £47.99 £57.59 BC130C 15/120 £61.99 £74.39 BC190 38/180 £89.98 £107.98 BC210C 15/120 £94.99 £113.99 BC410E‡‡ 35/400 £119.98 £143.98 BC205N NEW 30/200 £169.98 £203.98 BC520N## 50/510 £179.98 £215.98 BC430N NEW 60/400 £369.00 £442.80 ‡ was £155.98 inc.VAT # was £227.98 inc.VAT

FROM ONLY

HUGE CHOICE OF SPRAY GUNS & AIRTOOLS

KVA 0.7 1.1 2.4 2.8 3 4.5 5.5

BATTERY CHARGERS/ENGINE STARTERS FROM ONLY

EXC.VAT £99.98 £139.98 £159.98 £169.98

24649

CHECK FRAME TYPE WHEN ORDERING

MODEL G720 G1200 FG2500 FG3005 FG3050 FG4050ES FG5100ES

CON1500RHD MAX CAP CONCRETE EXC.VAT INC.VAT Clarke CRD620 26mm £49.98 £59.98 Clarke CRD1250 32mm £66.99 £80.39 CON1500RHD 32mm £79.98 £95.98

• Inc. 17, 19, 21 & 23mm HEAVY chrome vanadium sockets DUTY • 2x 24V Ni-Cd CIR220 ONLY .98 £ Batteries & 89EX.VAT 1 hour £ INC.VAT 107.98 fast charger OTHERMODEL MAX TORQUE EXC.VAT INC.VAT Corded CEW1000 450Nm £56.99 £68.39 Cordless CIR450C NEW 450Nm £119.98 £143.98

FROM ONLY

ELECTRIC MODELS ALSO AVAILABLE

ROTARY HAMMER FORKLIFT/TRACTOR DRILLS JACK - CFT5

MODEL

Honda FROM ONLY £ .98 engine 89EX.VAT models £ .98 available 107INC.VAT

PTO GENERATORS BUCKINGHAM

Provides essential home, garage and roadside assistance Integral work light 910 WATER PUMPS includes air compressor FROM ONLY PETROL & DIESEL £ .99 Long life battery DRIVEN IN STOCK 52EX.VAT FROM ONLY Delivery HEAVY DUTY 17KG £ .59 £ .98 63 INC.VAT Suction 159EXC.VAT hose £ .98 MODEL START PEAK 191INC.VAT available BOOST AMPS EXC.VAT INC.VAT 3/4" - 8" Bulk quantities 900 400A 900A £52.99 £63.59 from only £1/metre 910 400A 900A £59.98 £71.98 * Semi Trash pumps solids up to 20mm 4000 700A 1500A £114.99 £137.99 MODEL PETROL OUTPUT MAX EXC.VAT INC.VAT 12/24 1000A@12V 2000A@12V £129.98 £155.98 ENGINE HEAD 500A@24V 1000A@24V PW2 6.5HP 416 ltr/min 26m £159.98 £191.98 PW3 6.5HP 800 ltr/min 30m £189.98 £227.98 CHS2E* 4.0HP 700 ltr/min 23m £339.98 £407.98 5 TONNE

.98 49EX.VAT £ .98 59INC.VAT

PETROL CHAINSAWS

CS36OT

6kW

.00 209EXC.VAT £ .80 250INC.VAT £ .00 249EXC.VAT £ .80 298INC.VAT £

SDS +

GENERATORS

24V CORDLESS IMPACT WRENCH

FROM ONLY *stainless steel £ .98 #Dual Volt 39EXC.VAT £ .98 110V/230V 47 INC.VAT MODEL MAX EXC. WAS NOW OUTPUT KW VAT INC.VAT INC.VAT Little Devil II 10.3 £64.99 £83.98 £77.99 CZ-2104 Little Devil SSII* 10.3 £79.98 — £95.98 DEVIL7003 LT2000 Devil 650 15 £74.99 £107.98 £89.99 MODEL VOLTAGE HEAT EXC.VAT INC.VAT FROM ONLY • 24v Devil 660 SS* 15 £109.98 — £131.98 OUTPUT KW .98 £ Devil 850 12.4 –31 £129.98 £167.98 £155.98 CZ-2104 230v 2.5 £39.98 £47.98 available 79EX.VAT .98 Devil 860SS*# 31 £149.98 — £179.98 £ DEVIL 6002 230V 0.7-2 £39.98 £47.98 INC.VAT 95 Devil 1850# 26.9 – 58 £299.98 — £359.98 DEVIL 6003 230V 1.5-3 £49.98 £59.98 MODEL MODELCAPACITY EXC.VAT EX VAT INCINC.VAT VAT Devil 3000# 35.8 – 82 £339.98 — £407.98 DEVIL 7003 230V 3 £54.99 £65.99 LT2000 907kg £79.98 £79.98 £95.98 £95.98 Devil 4000 70–131 £399.98 — £479.98 DEVIL 6005 400V 2.5-5 £74.99 £89.99 UT3000 1360kg £139.98 £139.98£167.98 £167.98 Devil 3150# 46 – 100 £469.98 — £563.98 DEVIL 7005 400V 5 £79.98 £95.98 S4000 1814kg £299.98 £299.98£359.98 £359.98 DEVIL 6009* 400V 4.5-9 £119.00 £142.80 QUALITY CAST DEVIL 7009 400V 9 £137.99 £165.59 TURBO AIR IRON STOVES DEVIL 6015‡ 400V 5-10-15 £179.00 £214.80 COMPRESSORS LARGE & XL MODELS *was £155.98 inc.VAT ‡was £227.98 inc.VAT • Superb range ideal OVER 20 GREAT BIG 2HP IN STOCK TRACTOR for DIY, hobby & semiSTYLES IN STOCK 7.5CFM professional use 6.9kW

SUBMERSIBLE WATER PUMPS

*Handles solids up to 30mm diameter † Sewage cutter pump MODEL MAX FLOW MAX EXC. INC. LPM HEAD VAT VAT CSE400A 115 8.0m £29.98 £35.98 PSV3A 133 8.0m £34.99 £41.99 Hippo 2 230V 85 6.0m £46.99 £56.39 PSV1A* 140 5.8m £44.99 £53.99 HSEC650A† 290 9.5m £184.99 £221.99

FROM ONLY

Huge range of quality electric models – From DIY, trade to Industrial

INC.VAT WAS £83.98 inc.VAT

.98 179EXC.VAT .98 215INC.VAT

CIR220

ELECTRIC HEATERS

FROM ONLY

IN-STORE PHONE 0844 880 1265 ONLINE www.machinemart.co.uk

WHERE QUALITY COSTS LESS

XR80

CATALOGUE GET YOUR FREE COPY!

NOW

10' RANGE NARROWER WIDTH GREAT WHERE SPACE IS TIGHT

SIZE (LxWxH) 4.6 x 3 x 2.4M 4.9 x 3.7 x 2.6M 6.1 x 3 x 2.4M 6.1 x 3.7 x 2.5M 7.3 x 3.7 x 2.5M

EXC.VAT £219.00 £259.00 £269.00 £299.00 £379.00

INC.VAT £262.80 £310.80 £322.80 £358.80 £454.80

OPEN MON-FRI 8.30-6.00, SAT 8.30-5.30, SUN 10.00-4.00

MIDDLESBROUGH Mandale Triangle, Thornaby NORWICH 282a Heigham St. NR2 4LZ NOTTINGHAM 211 Lower Parliament St. PETERBOROUGH 417 Lincoln Rd. Millfield PLYMOUTH 58-64 Embankment Rd. PL4 9HY POOLE 137-139 Bournemouth Rd. Parkstone PORTSMOUTH 277-283 Copnor Rd. Copnor PRESTON 53 Blackpool Rd. PR2 6BU SHEFFIELD 453 London Rd. Heeley. S2 4HJ SIDCUP 13 Blackfen Parade, Blackfen Rd SOUTHAMPTON 516-518 Portswood Rd. SOUTHEND 1139-1141 London Rd. Leigh on Sea STOKE-ON-TRENT 382-396 Waterloo Rd. Hanley SUNDERLAND 13-15 Ryhope Rd. Grangetown SWANSEA 7 Samlet Rd. Llansamlet. SA7 9AG SWINDON 21 Victoria Rd. SN1 3AW TWICKENHAM 83-85 Heath Rd.TW1 4AW WARRINGTON Unit 3, Hawley’s Trade Pk. WIGAN 2 Harrison Street, WN5 9AU WOLVERHAMPTON Parkfield Rd. Bilston WORCESTER 48a Upper Tything. WR1 1JZ

01642 677881 01603 766402 0115 956 1811 01733 311770 01752 254050 01202 717913 023 9265 4777 01772 703263 0114 258 0831 0208 3042069 023 8055 7788 01702 483 742 01782 287321 0191 510 8773 01792 792969 01793 491717 020 8892 9117 01925 630 937 01942 323 785 01902 494186 01905 723451

FROM ONLY

.00 219EXC.VAT £ .80 262INC.VAT £

LENGTH UP TO 24'

OPEN 7 DAYS 4 EASY WAYS TO BUY... IN-STORE 65 SUPERSTORES

ONLINE www.machinemart.co.uk MAIL ORDER 0115 956 5555

CLICK & COLLECT

Calls to the catalogue request number above (0844 880 1265) cost 7p per minute plus your telephone company’s network access charge For security reasons, calls may be monitored. All prices correct at time of going to press. We reserve the right to change products and prices at any time. All offers subject to availability, E&OE.

24649 (55)Dec.indd FARM (full).indd 1 1-23 ROP 20

06/11/2015 16:23 16:07 10/11/2015

About People Sales team appointment Hannah Gates has joined the sales team of Deutz-Fahr, Krone and Amazone dealer, Barnes Agricultural Services which is based in Dauntsey, Wiltshire. Hannah grew up on a small farm in Wiltshire

AT 98 98 98 98 80 80 80

AT 59 39 98 99 98 98 98 80

R S

y& d by als. ps 11C, and win nder mps cept E11) ad ble

AT 98 80 80 80 80 80 80 80 80 80

Headed for bigger things and gained further agricultural experience last year when she worked on another local farm. She said she has always been interested in agricultural machinery and is looking forward to representing the quality franchises while looking after the needs of her customers.

New business, design and after-care Grain drying business Allmet is expanding its team with several appointments. Matt Woodhead is familiar to many Allmet customers, having already worked for the company for 11 years. Now he becomes northern sales manager covering the area from Lincolnshire to the Scottish border. Richard Holmes takes over Matt’s former role as service manager, with 17 years’ electrical and engineering expertise. Richard will be fielding breakdown and technical queries, taking spare parts orders and organising dryer servicing.

Completing the team are draughtsmen Graeme Tutin (left) and Ben Fawcett (below). Graeme has more than 20 years’ experience in engineering and construction and has worked as project engineer in sheet metal works. He’ll be using the latest CAD software to design bespoke drying systems. Ably assisted by Ben, whose previous design engineering background for drilling equipment for offshore oil platforms, this means Allmet can produce designs and drawings using the latest design programmes.

Having worked in Kubota UK’s service and aftersales team for 11 years, Rob Fox is being promoted to product manager for Kubota’s agricultural division. In this new, sales-oriented role, Rob will work with and support Kubota’s dealer network and its sales and marketing teams. This includes providing all technical product and training support across the agricultural product range – including its MGX-II and M7001 and M series

tractors. Rob joined Kubota having qualified with an HND in agricultural engineering from Harper Adams University and spent seven years in the service team of a New Holland dealer. Already at Kubota he has played a significant role in the service division, for example tailoring service training packages for the dealer network. Kubota says the investment in its agricultural team forms part of its long-term strategy to expand into the larger-horsepower tractor market.

New sales manager Hi-Spec Engineering is appointing Edward Lewis as regional sales manager for its vertical-auger and paddle-type diet feeders, vacuum tankers, side- and reardischarge spreaders, and its newest product – the Kompactor push-off trailer. Based in Cheshire, Edward will work with Hi-Spec dealers and their customers throughout Wales and the southern half of England. He brings practical knowledge from both the livestock breeding

and agricultural machinery industries, plus key business skills from senior management positions. His association with Hi-Spec began while still at school and continued through college years, working on a 350-cow dairy farm that ran Hi-Spec diet feeders and slurry tankers. Edward worked for Genus before setting up his own business importing agricultural products from New Zealand. Most recently he was group sales manager for a large Agco machinery dealership that also held the Hi-Spec franchise.

New name in fertiliser GrowHow, the UK’s largest fertiliser manufacturer, is being rebranded as CF Fertilisers UK following its acquisition by CF Industries Holdings last July.

The new brand will have already started to become evident at events, on orders, emails and the company website. CF Fertilisers UK says it will continue to invest in and manufacture at both Billingham near Stockton-on-Tees and Ince in

Cheshire. David Hopkins (left), previously sales director at CF Industries’ Chicago headquarters, is now managing director of the UK business. He has more than 30 years’ industry experience, having started his commercial career with ICI’s

agricultural division at Billingham. He moved to the US in 2006 with Terra Industries, which was subsequently bought by CF Industries. David has a degree in agriculture from Reading University and practical farming experience, having farmed in his native south Wales.

Tel: 01455 891929 • Fax: 01455 891974 Sapcote Road Industrial Estate • Burbage • Hinckley • Leicestershire • LE10 2AU

INDUSTRIAL DOOR Specialists

• Galvanised Roller Shutters

• Steel Fire Exit Doors

• Plastisol Colour Coated Roller Shutters

• Fast Acting High Speed Doors

• Insulated Roller Shutters

• Dock Leveler/Loading Bay Installations

• Sectional Overhead Doors

• PVC Strip Curtains

• Steel 10 Point Locking Security/Personnel Doors

• and many more products

Nationwide Service

12R31B

www.multiindustrialdoors.co.uk multidoors@hotmail.co.uk

H 4'

December 2015 www.farmersguide.co.uk 21

16:07

1-23 ROP Dec.indd 21

16/11/2015 15:38

About People Returning to seeds role Samantha Brooke is returning to the role of seed and seed treatment manager for Syngenta, having spent time as the company’s portfolio manager for genetics and plant growth regulators for north Europe. She’ll be responsible for seed sales to the UK and Irish trade for all the company’s agricultural crops

Root specialist moves on up – including cereals, oilseed rape and maize – along with its seed treatments. Samantha says it’s an exciting time, with the recent launch of high-yielding, high-profile varieties. In development is; Laureate, a “very exciting” new brewing and distilling spring malting barley; a high-yielding winter feed wheat variety called Graham; and sedaxane, an SDHI seed treatment.

Personnel changes for dealers Following the announcement of structural changes to dealerships in the November edition of Farmers Guide, Claas has also announced some personnel changes. At Claas Southern, Howard Pullen retires after 24 years with Claas and 20 years with Southern Harvesters. Russell Hallam – most recently general sales manager at Ashford – is being appointed sales director, while Thomas Hancock

becomes the new after-sales director. As sales director, Rob Iddeson will head the sales team for the Claas Western branches: Western Winchester; Western Frome and Western Dorchester. Meanwhile, Will Greenway will continue as sales director for the other three Western branches. Steve McCahill assumes the role of after-sales director for Claas Western.

Buy and sell online

www.farmads.co.uk FREE ads for farmers

Karl Arndt is joining CTM Root Crop Systems as sales manager for its Rockstar destoner separators and Ridgestar ridgers. Born in Scotland, Karl began his career on a large farming estate in west Norfolk, where he was heavily involved with its potato and root crop enterprises.

He then moved into sales within the machinery sector, with companies such as Reekie, Scanstone and Everett Bros Engineering – all deeply involved in the root crop and vegetable industries. He therefore brings great knowledge of machinery selection and applications to his new position with this forward-thinking company.

A new broom at Yara Peter Smith is being appointed as commercial director for Yara UK, responsible for the company’s activities in the UK and Republic of Ireland. Peter was a partner is the family dairy and arable farming operation in Perthshire for 10 years before joining the company 20 years ago. During this time, he’s held a series of commercial roles and, for the past four years, has been responsible

for Yara’s solid and liquid fertiliser business in Scotland. He will continue to be based in Scotland near Perth, while operating from the company’s head office in Grimsby, North Lincolnshire. Peter is a three-time world titleholder in curling, and was selected as a member of the British curling team for the 2010 Winter Olympic Games. He replaces Benoit Lamaison who is taking up a position with the company in Geneva.

Local knowledge, national expertise As crop protection specialist Hutchinsons continues to develop its business in Scotland, it’s appointing Iain Anderson as business development manager. Based at the Kingsmuir depot near Forfar, opened in 2013, he’ll be offering agronomy advice and selling crop production inputs. Iain is very familiar with the area, having grown up on the family farm

in Angus. He joins from Syngenta, where most recently he was field technical manager for the north of the UK. He was also responsible nationally for technical support to Syngenta’s barley seed and chemical portfolio. Iain is keen to use his local knowledge combined with national expertise to help growers maximise crop output. He says: “I’m excited about using the data from regional technology centres to refine the agronomy advice I give.”

SHORT OF STORAGE SPACE THIS YEAR?

12R24B

RIDBA

Plan now for your 2016 requirements

Rural & Industrial Design & Building Association

BOWIE LOCKWOOD 0845 257 2343

sales@bowielockwood.co.uk * Planning fee may be payable to NOT SURE WHAT YOU NEED? Design & planning service included* your local authority WANT TO USE YOUR OWN BUILDERS? We offer a supply only or supply & erect package

22 www.farmersguide.co.uk December 2015

1-23 ROP Dec.indd 22

16/11/2015 15:49

DO YOU SPEAK ISUZU?

ISUZU D-MAX UTAH

TOUGH, ECONOMICAL & CAPABLE TOO NOW YOU’RE TALKING

QUALITY THAT SPEAKS FOR ITSELF • Strong & tough 3.5 Tonne towing*

• Fit for purpose 4x4 Shift-on-the-fly

• Comfortable Leather upholstery & heated front seats

• Economical 38.7 MPG Combined#

• Peace of mind 125,000/5 year miles warranty**

A tough ‘go anywhere’ pick-up with a good level of comfort, class leading fuel economy, plus the five year warranty and legendary Isuzu reliability. It all stacks up for me. That’s why I speak Isuzu. Book a test drive at:

#SPEAKISUZU

isuzu.co.uk

MPG figures are official EU test figures for comparative purposes and may not reflect real driving results. #Official fuel figures for the Isuzu D-Max Utah Manual in mpg (l/100km): Urban 31.7 (8.9). Extra Urban 44.1 (6.4). Combined 38.7 (7.3). CO2 emissions 192g/km. Utah Auto: Urban 26.9 (10.5). Extra Urban 39.2 (7.2). Combined 33.6 (8.4). CO2 emissions 220g/km. For model specific figures please contact us directly or visit www.isuzu.co.uk *3.5 tonne towing capacity applies to all 4x4 models. **125,000 miles/5 year (whichever comes first) warranty applies to all new Isuzu D-Max models.

1-23 ROP Dec.indd 23

10/11/2015 16:11

24-49 ROP Dec.indd 24

11/11/2015 11:33

Updates and new models for forage harvester range Krone has announced updates to its forage harvester range with the addition of three new models.

Krone has expanded its self-propelled forage harvester line-up with new models available for 2016. A UK demonstration, in late October in Shropshire, also included news of upgrades to current models, launched last year, and to the company’s range of balers and mowers. David Williams reports. Forage harvester range expands Krone introduced its Big X range of forage harvesters in 2000, and innovations such as VariStream, launched in 2009, have been recognised with awards for the extra productivity they offer. The global self-propelled forage harvester market is approximately 2,800 units per year, and Krone’s 20 percent market share target means production and sales are expected to rise from the current 300 units per year to 560. Huge investment in a new dedicated Big X production line which entered service in 2014, and with a capacity of 600 units per year is in anticipation of future sales growth. Krone offers two sizes of forage harvester across nine models; those with a smaller drum width including the 480 and 580 machines launched in 2014, with two new models; a 530 and 630 being added for 2016. The two new machines allow Krone to offer a choice of two models the 530 and 580 within the largest sector of the market, with a choice of four models available between 500–700hp.

Two additional models, with extra features to improve productivity, have been added to Krone’s smaller 630mm drum range of harvesters. The Big X 630 is powered by a 626hp engine and the Big X 530 has a 530hp power unit.

There is also an additional model added to the larger forager line-up, with the 770 slotting in between the current 700 and 850 models. All Krone harvesters are built around the ideal 0.75–1.25hp to 1mm crop flow width, points out the company, with a minimum 0.75hp/

The Krone cab is used across the whole range of harvesters, but the new models feature improved controls over current models.

The Big X 630 is easy to operate, leaving the user free to concentrate on the crop and the trailer. The main joystick is used for transmission and spout control.

mm achieved by all models in the range. Key features on all Krone harvesters include VariStream, which incorporates a spring-loaded drum and accelerator bottom which allows the opening to adapt to suit the size of the swath, while maintaining peak engine loads with reduced risk of blockage. Six feed rollers hold the crop firm as it is presented to the chopping drum, to prevent any movement of the material which could reduce the efficiency of the chop. Powersplit is also on all models except the Big X 480 and 530, and allows automatic or manual adjustment of the engine power output to suit conditions. EcoPower is used when full power isn’t needed, saving fuel and wear and tear. Xpower provides full power for tough conditions. Krone’s Ground Drive system uses Bosch Rexroth wheel motors with planetary reduction boxes, and offers a stepless speed range from 0–40kph. Three travel modes are available; TC for grass - which is tuned to avoid wheel slip on sensitive grass sward, TC for corn -

A brand new touch screen is fitted to the two new 630mm models, and offers significantly easier performance monitoring than the current screen. The display is easy to read in bright, sunny or dark operating conditions.

The cab steps feature new LED lighting, activated at the touch of the button on the side of the steps.

New wishbone rear suspension is fitted to the 480, 530, 580 and 630 models, providing a smoother ride and a tighter steering lock. Hydraulic ride height control is also a new feature, allowing the operator to level the machine regardless of front wheel size, and making maintenance easier.

which allows limited slip, and slip control off. On the smaller 630mm drum range, the wheel motors are arranged eccentrically allowing the rotation of the reduction hubs to alter the relative position of the wheel centres to the harvester body and keeping the machine level regardless of which wheel size option is fitted. The new Big X 530 is powered by an MTU 6R 1300, 12.8-litres capacity engine producing 530hp, with 500 available under the constant XPower mode while chopping. The Big X 630 has a larger MTU 6R 1500, 15.6-litre power unit producing 626hp, with 596hp available within the XPower mode while chopping. Both machines use SCR (Adblue) to meet emissions regulations. A new driveline, using one main belt to drive all major components, offers efficiency improvements. The two new models have a 630mm drum width and there is continued over...

MTU 6-cylinder engines power the smaller harvesters in Krone’s range. Access for maintenance is excellent.

December 2015 www.farmersguide.co.uk 25

24-49 ROP Dec.indd 25

14/11/2015 15:06

MEN

Look this ad over carefully. Circle the items you want for Christmas. Show it to your wife or girlfriend. All items are available at thunderpole.co.uk.

T-800 CB Radio Ref No: 01T-800

CB Starter Pack

Ref No: STARTERPACK

Orbitor HD Ref No: 12075

Gutter Mount Ref No: 15002

T-800 Din Mount Ref No: BRACK39510

CB Speaker Ref: 04ES5WNF

LADIES

Give your man a Thunderpole this Christmas

Mark Weatherhead Ltd.

Garden Walk, Royston, Herts SG8 7HT • Tel 01763 242361 Branches: Hardwick 01954 210355 • Steeple Bumpstead 01440 730377 12R36B

12R39B

Wa ste Manage me nt So luti on s

Rural Entrance Security

LAND RESTORATION SITES

Hinging and sliding electric gates for farms and rural property. Ensure only your welcomed visitors gain access to your property. Effective access control allows you to control your entrance with maximum convenience and helps maintain the safety and security of your valued assets.

Wellington Security Products

Acorn House, Cutlers Green, Thaxted, Dunmow, Essex CM6 2PZ The Old Timber Yard, Longborough, Moreton-in-Marsh, Gloucestershire GL56 0QJ

Free site survey and quotations:

01371 831731

mail@wellingtonsecurity.co.uk • www.electricfarmgates.co.uk 26 www.farmersguide.co.uk December 2015

24-49 ROP Dec.indd 26

11/11/2015 16:13

...from previous page

PowerSplit on the 630 machine for fuel savings when conditions allow. A MaxFlow drum is a new feature and is fitted to both new models. It has a large, newly designed, 660mm diameter cutterhead which provides twice the carrying space for chopped

A new feature, standard on the four smaller models, is a maize cracker which can be moved in and out of work hydraulically without tools. The feature is expected to be popular for dual use, producing forage for livestock and finechopped silage for AD plants.

crop compared to the conventional drum design. The new foragers are designed for dual-use, producing forage for livestock and fine-chopped silage for use in AD plants and the standard 36-knife drum can chop maize to 17mm or, with half the blades fitted, can chop grass to 34mm. Another new innovation for the smaller range is the VariQuick maize cracker design which allows the conditioner to be moved

Krone marketing manager James Duggleby demonstrates the air line, included in the standard specification to make maintenance tasks easier. “The additions to the harvester range and the updates to existing models will be popular with users,” he said, “and we are confident that within the next few years we will achieve a 20 per cent market share across our whole product range.”

hydraulically, using a hand pump, in and out of its work position, reducing the time needed to swap between crops and is expected to be a feature popular with contractors. This offers greater ease of use than the previous design which relied on the operator lifting the cracker out when it wasn’t needed. A new cracker roller option has been added this year, with 105 teeth, extending the range to include four options. Most UK users opt for 144 or 166 teeth versions, according to the company. StreamControl is a new option available for all Krone harvesters within both size ranges. This allows the back plate of the accelerator to be adjusted from the cab, reducing or increasing contact with the crop, and allowing the throw distance and pressure to be adjusted. When higher pressure isn’t needed the plate is moved out, reducing the power requirement as well as wear and tear. A major feature on the smaller models is wishbone suspension on the rear axle. This is standard and used on both 2wd and 4wd variants. Apart from improved operator comfort, the wishbone suspension provides space for lower mounting of the engine, reducing the centre of gravity and also maintains the wheels’ movement up and down within a vertical plane, providing space for a tight 50 degree steering angle, allowing immediate return down the next row without a large headland or space for shunting needed. Increased fuel capacity is provided on the new models, with an optional 230 litre auxiliary tank supplementing the main 1,220 litre fuel tank providing almost 1,500 litres for longer periods without refuelling. The Adblue tank is at the rear of the machine, and easy to

get to. A silage additive tank with 275 litres capacity is fitted on the right hand side of the cab above the front wheel and a controlled application system can be set to automatically adjust rates between 0.5–4.5 litres/min according to the crop throughput. Krone’s own cab is fitted, with features similar to those of other models in the range, but a new aid for drivers is an all-new touch-screen terminal, which will also be a feature on larger models in the future. The headlights and work lights are all LED for improved operation at night, and extra LED lights are available as an option. Autolube is standard, and controlled from the terminal. Maintenance at the front end is simplified with a new design allowing either end of the feed rollers to be removed, either with the header or separately, for ease of access to the drum and feed rollers. A handy air line is now included in the standard specification with plug-in points around the machine allowing it to reach all areas. The header mounting system of the new models uses a new pivoting design and there is the option of hydraulic locking and a quick coupler, saving time when the header is removed or mounted.

Larger models updated The larger models in Krone’s Big X range have also been updated and there is an all-new Big X 770 with new styling and a new spout design as well as a drum brake capable of stopping the chopping drum in under 10 seconds. The Big X 770 is powered by a 16.16-litre, V8 engine, producing 753hp, with 729hp available for chopping in the XPower chopping mode. With EcoPower activated the output drops to 510hp, saving fuel and wear and tear. Diesel tank

The larger range of Krone Big X forage harvesters, with an 800mm drum is extended with the addition of an all-new 770 model, with 753hp available from its MAN V8 power unit.

capacity is the same as on other models in Krone’s large forager line-up, at 960 litres and there is an optional 300-litre auxiliary tank available. A 300-litre silage additive tank is an option. The new MaxFlow drum is fitted, as on the new 530 and 630 models in the smaller range, and StreamControl is an option. The in-cab terminal is a large 10in unit, with button control. The new styling includes a front-end guard and protection for the vulnerable side mirrors as well as more effective warning panels, for increased visibility on the road. Mudguards and steps are new, similar to those of the smaller models, with LED safety lighting. To activate the lights, the operator just presses a handy button near the base and the lights come on, and remain on for several minutes. The new spout design includes a square end for grass, and a conical end for maize and provides easier control for the operator. The new MaxFlow chopping cylinder is capable of dealing with a greater flow of product than the previous drum design, so the new spout outlets make it easier for the operator to control the throw direction and accuracy. Spout extensions for compatibility with 10, 12 and 14-row headers are available, with quick couplers used to secure the sections. A redesigned flat pre-cleaner supplies clean air for the engine and improves the rear view with its lower overall height. Another popular update will be the improved storage, with new external compartments provided for tools and spare parts. For improved farm record keeping Krone is offering a new version of its I CAN system, which provides yield monitoring and moisture metering. The I CAN version 2400 can be operated from the in-cab terminal linked to a CCI mobile app for task and data recording. “We have introduced the new 770 in response to customer demand. The Big X 700 has been very popular, but users are looking for even more capacity without upgrading to a machine as large as the Big X 850 or 1100,” explained James. “The extra power of the 770 over the 700 means we expect this to take over as the best seller within our larger range of forage harvesters.” The demonstration provided an opportunity for Farmers Guide to test-drive the new Big X 630 continued over...

December 2015 www.farmersguide.co.uk 27

24-49 ROP Dec.indd 27

14/11/2015 15:11

The silage additive tank is a new feature, and provides 275 litres capacity and an integrated metering system.

Krone has announced a new range of mowers designed for small to medium-sized farms. The ActiveMow range includes five models from 2.05–3.61m cutting width and replaces the current 4-model AM range.

Mowers

Handy compartments have been introduced around the machine for convenient storage of tools and other supplies. ...from previous page

harvesting maize. The Krone cab is excellent, with plenty of space available for the instructor and driver, and noise levels were low enough for normal conversation. Controls take little getting used to, with everything needed for normal operation included on the joystick, a button pressed on the rear and a forward movement needed to get the machine in motion, and then pulses applied to the control used to regulate the speed. The spout direction is controlled by small buttons at the top of the joystick, and excellent visibility to the right side made monitoring the trailer filling easy. The steering lock is noticeably tighter than before, making it easy to turn on the headland and improving operation around obstructions in the field.

New mowers, launched at Agritechnica, include the ActiveMow which replaces the current AM range and is designed to meet the requirements of small to medium farms. The new range includes 3-point linkage models under 5m cutting width including the 3m variants, likely to be most popular with UK user, according to the company. Krone UK marketing manager James Duggleby said Krone enjoys an approximate 15 percent UK mower market share, but the company’s target is to increase its share to over 20 per cent, for all its products. The new range includes five models up to 3.6m cutting width, up from four in the previous AM range which included cutting widths up to 3.2m. Features of the new range include shear pins in the drive hub providing protection to the drive line, and the SafeCut design allows the blade to rise above and avoid contact with neighbouring blades in the event of a shear pin break. The new mowers have a SmartCut mower bed which features increased overlap between blades for an even cut in both light and heavier conditions. The new discs are modular, with individual components replaceable, which will reduce maintenance costs. A new headstock is designed to suit larger tractors, and provides a greater distance between the centre of the tractor and the first cutting disc. Added convenience is provided by integral spare blade stowage within the headstock assembly. Simple suspension is adjusted via springs, the spring-based system providing quicker reaction to changing ground conditions, explained James. Improved travel between sites results from a 100-degree fold over

angle, which replaces the 90-degree carrying angle of the previous mowers, which could restrict the rear view through the tractor mirrors.

Balers News of Krone’s baler range included the BigPack 870 HDP XC which is now in full production after a limited number were manufactured and completed trials in 2015. “Nine pre-production machines were working,” explained James, “in crops including straw, forage and silage.” The HDP High Density Pack produces bales of very high density for ease of handling and storage, but with Krone’s Multibale as standard, the operator can choose to divide the main bale into segments of any size from 30cms, provided they are divisible by the overall bale length. We have offered Multibale for over 10 years in the 120x70 profile, but that was a big bale for manual handling even with its minimum 30cm thickness. Now the size has been reduced by a third, the bales are more manageable and attractive for smaller livestock producers and equine use. The high density means five strings are needed, so five knotters have to be accommodated, but slimline knotters have been fitted and strings one, three and five keep the package together and numbers two and four make up the bale sections. The baler uses an EasyFlow camless pick-up, which has fewer wearing parts than conventional pick-ups so requires less maintenance. It has a faster rotation speed and five rows of tines. A powered auger keeps the crop tight into the packing mechanism for an even feed and the pre-chamber design means wafers of straw, capable of filling the entire chamber from bottom to top are produced before entering the main chamber.

The uniform-sized wafers maintain constant density throughout the bale length, regardless of variable crop volume and result in a square edge, which means the strings stay firmly on the bale. XCut chopping is an option, with up to 16 blades available. James said most of the balers sold in the UK are supplied without the optional chopper, but that there has been increased demand in recent years. Protection throughout the machine is by cam-clutch, reducing downtime if blockages occur, with the only shear-bolt used to protect the knotter arm. Hydraulic adjustment of bale density allows changes to be made from the cab, the system using pressure sensors on the con rods to measure the force. When extra density is required, the rear doors are pushed in tighter by the hydraulics, creating greater resistance on the bale leaving the machine. Moisture sensors and bale weighing systems are an option with approximately 50 per cent of machines now supplied with weighers, according to James. The balers are fully Isobus-compatible and performance information is available through Krone’s app, launched this year at Cereals.

Pellets from the field An all-new product, which has been undergoing testing this season, was shown at Agritechnica. The Premos 5000 is a concept machine, which produces straw pellets straight from the field but won’t be available commercially for at least two years. Designed on the principle of a baler, it can also be used stationary to process straw from bales out of harvest season. In the field, a conventional pick-up collects the straw, and the crop then passes through a conditioning rotor before being forced between compression gears to achieve pressures approaching 2,000 bar. The crop is forced through tubes which form the compressed pellets, achieving temperatures of 70–100 degrees centigrade, pasteurising the material. Krone’s BigPack conventional baler achieves pressures up to 170kg/ m3, and the high-density version achieves pressures of 200–220kg/ m3, but the straw pelleter produces pellets with a density of 600–700kg/ m3. Producing the straw pellets in the field cuts down significantly on transport requirements, and the compressed material takes up far less space to store than straw bales. Operating speed in the field is approximately 5kph, and Krone sees possibilities for the product to produce the pellets for fuel, as well as for bedding. ■

28 www.farmersguide.co.uk December 2015

24-49 ROP Dec.indd 28

16/11/2015 17:04

TYRES FOR PROFESSIONALS

Flotation Pro

Traxion+

Flotation Trac

Traxion 85

Flotation+

HIGH QUALITY, WIDE RANGE, PREMIUM IMAGE, EXCELLENT PERFORMANCE, LONG-LIFE SPAN.

W W W.V R E D E S T E I N . C O. U K

id7_VSTEIN_2550636_001.indd 1

13-5-2013 11:02:05

Rebell Profiline

www.koeckerling.com/rebell

HD Disc Cultivator

The Rebell Profiline is a short disc machine for moderate to deep soil preparation Machine has 630mm discs, double STS roller and easy shift hydraulic depth control For use on stubble and ploughing 12R20B

Contact – Samagri Ltd – Phone: 01256 384208

December 2015 www.farmersguide.co.uk 29

24-49 ROP Dec.indd 29

11/11/2015 13:00

Stocking the full John Deere Agricultural range

“G Germany’s Ge ermany s Numb Number beeerr

1 arrives in the UK” K”

ZUNHAMMER Slurry and Digestate Handling Technology Custom Tanks for Transporting or Distributing liquid manure 1 - 3 axle tankers, up to 30m3/30,000Litre fibre glass tank capacity Mobile pump stations for AD Plants, Docking Stations Disc injectors 6m - 12m, Disc cultivators, dribble bars 9m - 36m, Trailing shoe HOLMER exxact TerraVariant Self-propelled systems tractor equipped with a 21m3 tank capacity

For more information, please call: Matt Carse M - 07860 288973 T - 01354 660552 E - m.carse@agrifac.com Agrifac UK Ltd, 4 Thorby Avenue, March, Cambridgeshire, PE15 0AZ

12R26B

    

HIRE 01728 628325

MAULDEN 01525 405848

CROMER 01438 861257

SUDBURY 01787 374100

RAYLEIGH 01268 783311

DUNMOW WORLINGWORTH ARDLEIGH 01728 01206 01371 628325 230283 875751

www.tuckwell.co.uk

30 www.farmersguide.co.uk December 2015

24-49 ROP Dec.indd 30

13/11/2015 15:43

Tractor, forage harvester and sprayer developments The John Deere Langar press day was the first opportunity to see the impressive new 9RX in the flesh in the UK as it had arrived just a few days before.

Sprayer developments

Undoubtedly, the highlight of a press event at John Deere’s Langar, Notts, UK headquarters was the first opportunity to see the eagerly anticipated 9RX articulated tracked tractor in the UK, but there was also news of other innovations designed to boost farm productivity. David Williams reports. The event commenced with John Deere UK marketing manager Chris Wiltshire explaining the current market situation within the UK, as well as the focus for 2016–18, which will concentrate on the introduction of the latest products, following considerable investment during recent years as well as the dealer network’s relationship with new and existing customers. “Having the strongest dealer network is key to our success. Customers want a true partner to offer a solution package to meet their needs and our dealers provide that specialist service and knowledge.” Chris went on to explain that 2015 has been another successful year for the company in terms of awards for its products and innovation, and that at Agritechnica in November, it would be presented with three Gold and 10 Silver medals. John Deere tractor updates this year have included the 6R and 6M series; the higher specification 6R range forming the best-selling series in the UK, and he said the new 6155R, which replaces the current most popular model overall; the 6150R, is significant, as it is expected to take over the mantle of best seller, in a market segment which accounts for 25 per cent of annual UK tractor sales. John Deere’s precision farming solutions packages, under the Farmsight banner, are increasing in popularity with 90 per cent of extra-large farms and 64 per cent of contractors currently using automatic steering systems. “We expect that within three years, 69 per cent of large farms will be using GPS section control on sprayers,”

explained Farmsight product sales specialist Oliver Beekes. “Use of technology is increasing rapidly with 87 per cent of UK farms above 200ha using information management and precision farming systems, and 83 per cent are using specific farm weather data. In the past four years alone, we have seen an increase of 44 per cent in the number of farmers using specialist farm records software.” John Deere has been very successful in its introduction and user take-up of its precision farming portfolio but Oliver said the only way to provide optimum benefits for the future is to open up its range to allow integration with as broad a range of systems from other brands as possible. The ‘MyJohnDeere’ application is a gateway allowing users to connect machines, operations and fields and is also a source of reliable weather data. “We offered ‘connected’ combines first, ‘connected’ sprayers this year and will have ‘connected’ tractors functionality for 2016,” explained Oliver. “We expect ‘connected’ forage harvesters to follow shortly after.”

As reported earlier this year by Farmers Guide (August 15 edition), John Deere has added new models and incorporated new technology into its trailed sprayer line-up. PowrSpray offers significant advantages for users, with the potential to achieve improved controllability and to save fuel, using two hydraulic-driven pumps. Available on high specification R900i series trailed sprayers in 4,400, 5,200 and 6,200 litre tank capacities currently, PowrSpray offers filling speeds twice as fast as a conventional filling system, and has 50 per cent fewer moving parts, but offers direct rate control adjustment three times faster. Standard is a 1,200-litre/min main filling pump, while a slightly smaller 1,000-litre/min pump provides the flow for spraying, and one of the main advantages is that even maximum pumping rates are achieved with the tractor engine at idle. The centrifugal pumps allow agitation during transport between the yard and the field without any risk of pump damage and cleaning the sprayer and pump after applications is made easier with 45 per cent lower residual volume. Direct Rate Control, which controls the pump speed, is able to adjust between maximum and minimum flow rates within just three seconds, offering flexibility of control unmatched by conventional systems, and providing accurate variation of spray rates for variable rate applications, and headland turns. Because the pump speed is independent of engine speed, the tractor can be driven in economy modes, with the engine running only

The PowrSpray system, available for 900 series sprayers, was demonstrated, but needed three IBC containers to provide enough water flow to keep up with the pump, even with the engine at idle.

Two hydraulic-driven pumps provide the flow for filling and spraying while a clever electronic control system regulates pump speed and liquid flow.

as fast as needed to pull the load, which saves fuel, wear and tear and noise. The system includes Auto Filling, Auto Agitation Intensity, Power Agitation for maximum mixing performance and the Auto Dilute rinsing system. The press day at Langar included a demonstration of the filling speed, with three IBC containers needed to keep pace with the pump’s performance, despite the 6R tractor powering it being run at just an idle. An active pause feature is included, which allows the operator to add the chemicals to the induction bowl while water filling is slowed to a trickle, after which full flow rate is resumed, with automatic cut off activated when the required amount of liquid has been added.

Self-propelled forage harvesters Three new models have been added to John Deere’s 8000-series range of forage harvesters, following the launch of the series during autumn 2014. The 8300 is powered by a 13.5-litre 490hp John Deere engine, and fits in to the range above the 8100 and 8200 models while, at the top of the range, new 8700 and 8800 models have been added, with 19-litre Cummins engines producing 761hp and 845hp respectively. The addition of the new models expands John Deere’s offering to eight machines. Active Fill Control is fitted, which detects the trailer position and senses the fill level, using an intelligent strategy to optimise trailer loading and reduce operator effort. According to John Deere, the average selfpropelled forager harvester operator makes up to 6,000 spout adjustments per day, and the new system will reduce time spent monitoring the trailer by up to nine per cent, allowing him to concentrate on optimising continued over...

December 2015 www.farmersguide.co.uk 31

24-49 ROP Dec.indd 31

14/11/2015 15:26

HARDCASTLE VENTACROP LTD

RollerShutterDOORS

CROP STORAGE SPECIALIST

•High Quality construction or powder coated •Galvanised to standard colour

Hardcastle Ventacrop are specialists in the manufacture and installation of Hardwood Main Air Ducts and Hardwood Drive-over Drying Floors. With over 30 years experience our systems are installed the length and breadth of the country making us the No.1 choice for Grain, Potato and Onion Storage.

•Electric or manual •24 hour repair service •Provides excellent security

Hardcastle Ventacrop provides a full design, planning and installation service for all Crop Storage Systems.

FREE SURVEY ANYWHERE IN THE UK

Visit our Website: www.hardcastleventacrop.co.uk

DOORS & SHUTTERS LTD

To avoid disappointment contact us now.

Incorporating DSMA & ABHM

Email: sales@dpdoorsandshutters.co.uk Web: www.dpdoorsandshutters.co.uk

Farmers_Resale_Weekly_Full_Page_Ad_Jan_V1.pdf 1 08/01/2015 09:47:50

12R34B



sales@johnmoore.co.uk T PARTS ATES N E M E C A L L REP GE - TOE P D E G N I T T CU OOLS





12R12B

Tel: 01142 889464•Fax: 01142 939193

Sales: 07767 277213 Tel: 01377 254257 Email: dave@hardcastleventacrop.co.uk Sales: sales@hardcastleventacrop.co.uk

•Also supply steel-hinged doors

GAGING TRASIVE RESISTANT PLATE

GROUND EN

’ e g d e e h t oore has AB

‘john m



             

CMY



 .01778 342642 e.@.

www.johnmoore.co.uk JOHN MOORE (TRACTOR PARTS) LTD, STEVENSON HOUSE, LADFORD COVERT, SEIGHFORD, STAFFORD, ST18 9QG

32 www.farmersguide.co.uk December 2015

24-49 ROP Dec.indd 32

11/11/2015 16:02

The 6155R replaces the 6150R, and is especially significant as it is expected to quickly become the best-selling tractor in the UK. ...from previous page

the harvesting performance and reducing the risk of spillage. Because the sensor doesn’t rely on daylight to fill, it is equally effective at night and will work in all weather conditions. A new option, which will be popular with busy contractors, is an automatic PTO connection from the harvester to the header, which means the pick-up can be attached without leaving the cab, apart from to connect the hydraulic services. Key features of the new models include a longitudinal engine layout, which provides improved airflow through the machine, resulting in less power needed for the cooling system as well as a lower engine mounting position which aids stability. The 8000-series cabs incorporate an anti-glare control screen similar to that of a mobile phone display, Bluetooth connectivity and climate control. Header updates include new 9-series grass pick-ups and Kemper 300 or 400-series row-independent rotary drum harvesting units.

Another option for tracked users A new tracked tractor option will enter the market during 2016, providing competition to the Case IH Quadtrac and Versatile DeltaTrack. Based on John Deere’s longestablished 9R series articulated wheeled tractors, the 9RX features four track units in place of the

wheels, and promises low ground pressure as well as optimal use of the power available. Within the 9RX range are four models; the 9470RX, 9520RX, 9570RX and 9620RX; John Deere 13.5-litre PowerTech PSS engines used in the 9470 and 9520 machines and Cummins QSX 15-litre engines powering the two largest models. Cooled exhaust gas recirculation, enhanced turbocharger technology, a diesel particulate filter and SCR (Adblue) are used on all models to meet Tier 4 final emissions regulations. The specification is similar to that of the articulated wheeled models but the track units use a huge drive sprocket of just over one metre diameter to engage with the rubber tracks through a 101 degree wrap angle, and provide the drive, while two large idlers and midrollers spread the weight along the length of the track on the ground and ensure maximum traction. The idlers are smooth, which means there is nowhere for dirt to build up, explains John Deere, and the front roller is slightly raised compared to mid-rollers for improved ground contact. The two mid rollers are either side of the centre-pivot point, allowing a gradual transition over unyielding ground undulations and reducing shock loads up through the undercarriage structure. Up to 10 degrees of track assembly movement is available front and rear. The track hubs are sealed for life while the mid rollers require a level check every 1,500 hours. Tracks are made for John Deere by Camoplast and are available in 76cm (30in) or 91cm (36in) widths, the narrower belts maintaining an overall width of under 3m for road work. Transmission is powershift and uses John Deere’s e18 system which incorporates automatic shifting to match power demands. Efficiency Manager automatically monitors the engine and transmission performance, maintaining the

The 9RX features a huge track mounting and drive assembly (left) to transfer up to 620hp to the ground. Scrapers (right) are an option for sticky soils where a build-up of dirt could occur between the drive sprocket and track.

lowest possible engine speed for maximum fuel savings. Active Command steering is an option which improves manoeuvrability and line-holding ability even at transport speeds up to 40kph. The cab is the latest CommandView 3, and incorporates a new 4-post suspension system, using a torsion bar at the front to remove unwanted side-to-side movement but permits up to 10cms of vertical travel, providing a smooth ride for the operator and reducing vibration. A premium LED lighting package is an option with halogen lighting supplied as standard equipment. AutoTrac guidance and JDLink Connect Information management are standard and a 4th generation CommandCenter display is fitted. Fuel tank capacity is 1,490 litres and Adblue capacity is 83 litres. Gross weight when full of fuel is approximately 28t and there are no extra ballasting options available. A rear linkage, with up to 9t lift capacity, and PTO are both options, and a Cat 5 drawbar is standard on the largest models while a Cat 4 hitch is standard on smaller models. Hydraulic performance is impressive with up to six SCVs available factory fitted and up to eight available for fitting by the dealer. Hydraulic flow rates up to 435 litres/min are available, although standard specification includes a 220-litres/min flow rate. First deliveries of the new 9RX will be in Spring 2016, with production due to start in February. Just one 9RX will be in the UK until then; a top of the range 9620 model complete with rear linkage. Farmers Guide was invited to attend one of a few early dealer days to which selected customers had been invited. With an 8m Horsch heavy cultivator at the rear, conditions for operating on the heavy Cambridgeshire land were challenging, as heavy rain had fallen during preceding days, and continued to fall throughout the demonstration day. Despite the weather, the event was well attended and dealers reported considerable interest from potential customers, including many currently running large wheeled tractors as well as tracked machines of other brands. Chris Wiltshire commented; “The weather was poor during much of the week when the customer days took place but, despite the conditions, the 9RX was able to work at each location. The reception from potential customers exceeded

The rear hydraulic lift arms are an option, as is a PTO. The rear hitch is Cat 5, and up to eight SCVs can be fitted with oil flow rates up to 435 litres/min.

anything we could have hoped for and there was a lot of enthusiasm for the new tractor. We had expected visitors to have a look, see it working and then leave, but many stayed for three to four hours, as they were so interested. “The main reason for attending was that farmers were looking for larger machinery and there seemed to be appreciation that there is another option in the large crawler market. Excellent back-up is needed for users running a machine like this and customers are confident that we have the support available. There was a great deal of interest in the technical aspects of the tracks and the cab suspension system as users are keen to use a machine which is comfortable on the road and in the field,” he continued. Chris said the poor weather conditions had made conditions for fieldwork difficult in all but one of the locations, but that the challenging situations showed the benefits of the four-track system. “Many of those attending were existing John Deere users, many of who are considering upgrading from 8- and 9-series wheeled and tracked machines,” he said. “There was a great deal of interest from users of other brands too, and dealers are going to be very busy now arranging demonstrations on users’ farms during the spring. Most interest was from large-scale farmers although contractors attended too. It seems from the enquiries so far that the best sellers are likely to be the 9520RX and flagship 9620RX, supplied to a high specification with rear linkage and PTO, partly because there is an expectation that these options will increase saleability when the time comes to update. “The demonstration days have already resulted in one firm order from a farmer who attended an event in Gloucestershire and he and his operator were both very continued over...

December 2015 www.farmersguide.co.uk 33

24-49 ROP Dec.indd 33

14/11/2015 15:37

The 9RX cab includes technology to get the best from the power and traction available.

enthusiastic. The 9RX is certainly creating a great deal of interest and we look forward to them becoming available,” he added. The demonstration provided an opportunity for Farmers Guide to try out the new machine. Performance

was impressive, despite the slippery conditions, and the tractor had no problems putting its power to the ground. The site was sloping, and had variable soil conditions between the lower and raised areas, so it was an ideal test for the Efficiency Manager engine and transmission control system. As conditions altered and the engine load increased or decreased, the software monitored what was happening and shifted the gear up or down as needed. Even with the heavy cultivator at the rear, changes under load were smooth, and barely perceptible to the operator, the main indication being a change in engine note and the in-cab display showing the change in engine speed. Fully programmable, the operator can set the speed at which gear changes occur to suit the application, but the big Cummins engine operated throughout at very low revs. The cab is spacious and comfortable, with decent sized seats. Noise levels are low and there is little vibration from the track units. Manoeuvrability is good, providing efficient headland turns and the AutoGuide steering easily maintained a straight line while working alternate bouts.

Farmers Guide attended one of the first UK customer days to which selected potential users had ben invited. Conditions were very poor but the tractor had no problems achieving the traction needed on the slippery, heavy land.

Invited farmers and contractors were keen to see and try out the new 9RX.

With a starting price of £332,307 for the base 9470RX, and with the flagship 9620RX priced from £388,668, the 9RX machines are

a big investment, but will satisfy those looking for high performance to improve timeliness of farm operations. ■ 12R23B

Puncture Proof Fill



Retread Agricultural Trailer



Excavator & Industrial Tyres

385.65 R22.5

£2

RETREAD AGRICULTURAL & TRAILER TYRES

We are able to offer a service for all your concreting requirements:



£1

excavating road prep site prep drainage concreting

K EN EE OP S A W AY 7D

Demaine Ltd

445.65 R22.5

• Internal floor slabs using continuous pour system, reducing time on site and minimising troublesome construction joints

• Floors laid level or to a gradient

435.50 R19.5

• Storage areas and roadways G S Parker Construction Ltd has built its business on reputation and ablity to complete works to their clients’ expectations and always on time

£1

£2

• Steel reinforced or fibre reinforced

• Power float or brush finish

425.65 R22.5

EXCAVATOR  AGRICULTURAL  INDUSTRIAL

315.80R 22.5 Station Road Industrial Estate Ampthill Beds MK45 2RB

www.demaineltd.co.uk

£2 9

G. S. Parker Construction Ltd

Unit 8 Norman Way, High Street, Lavenham, Sudbury CO10 9PY Tel: 01787 248539 or Mobile: 07775 696 474 email: gary@gsparkerconstruction.co.uk or g.s.parker@btinternet.com

£2 9

12R03B

For all your groundworks or concreting needs, large or small contact:

315.70R 22.5

07599 019133

34 www.farmersguide.co.uk December 2015

24-49 ROP Dec.indd 34

14/11/2015 15:38

OFFERS AVAILABLE – PHONE FOR A GREAT DEAL

P J Reed

OFFERS AVAILABLE – PHONE FOR A GREAT DEAL

THE ORIGINAL RADIANT HEATER

12R06B

Agricultural Contractors

12R41B

Grove Farm • Barrow

ULATORS M U C C A BALE

N U T O C S I 2 5% D

EFORE 201 B D E R 6 DE R O S E N I O N N E W MACH

SECONDHAND MACHINES NOW IN STOCK WINTER SERVICES AVAILABLE

Call for more information Will 07828 730712 • 01284 810751 • baleaccumulators@hotmail.com December 2015 www.farmersguide.co.uk 35

24-49 ROP Dec.indd 35

16/11/2015 16:13

12R21B

Paul Huxley Construction is a designer, manufacturer and supplier of Agricultural, Industrial and Equestrian Steel Framed Buildings. With over 25 YEARS EXPERIENCE, we offer a bespoke design service and a wide range of kit frame buildings. We also provide a full foundation and erection service. Our 24-hour workshop enables us to have the fastest delivery times in the business. All steelwork is shotblasted and painted/galvanised.

Paul Huxley Construction Tel: 01691 610083 Mob: 07903 616 593

email: sales@paulhuxleyconstruction.co.uk www.paulhuxleyconstruction.co.uk

1224-CPR-0704

Drainage Specialists Land Drain Jetting • Yard Drain Jetting Ditching • Trenching • Mole Draining latham@lmg-agri.co.uk 07545 053667

ESSEX

CAMBRIDGESHIRE

HERTFORDSHIRE

SUFFOLK

12R40B

36 www.farmersguide.co.uk December 2015

24-49 ROP Dec.indd 36

16/11/2015 09:46

New products and updates from cultivator and drill manufacturer t Great Plains has announced major updates to its popular X-Press range of stubble and seedbed cultivators including this large trailed version with Double disc rear packer.

A press event at Great Plains’ UK headquarters included news of totally new products, updated ranges and a redesigned cultivator, recently presented to the UK dealer network and ahead of their Agritechnica debuts. David Williams was there. It is five years since American cultivations, planting and seeding giant, Great Plains, took over the Simba machinery business, and investment in new products and improvements to the range is continuing, to ensure the demands of modern European farms are met. “There have been significant changes to the way crops are grown in the UK,” explained Great Plains UK sales director David Holmes. “Heavy land which, for many years, has grown nothing but winter-drilled crops is being planted with spring-drilled crops, and there are extra crops grown within the rotation such as cover crops, to improve soil structure and to help provide cultural control against increasing grass weed problems.” David explained the benefits of the company’s three main seeding systems including the Centurion cultivator drill, the Saxon drill, which is based on the Centurion but is designed for low disturbance and to cope with high residues, and the Spartan which is a no-till drill. “We are seeing more questioning of current crop establishment techniques due to the costs involved,” said David. “With margins under pressure farmers are looking for ways to save money, with versatility to cope with different working conditions and soils. Traditionally Simba was seen as a manufacturer of large machinery for bigger farms but demand from smaller enterprises for the same technology means that our highest volume in recent years has been towards the 150hp market.”

At its Kansas manufacturing facilities, Great Plains produces drills from 1.4–15.0m working width for supply to 60 different countries, and offers the world’s largest range of drills from one manufacturer. The Saxon was launched at this year’s Cereals event and is available in 3 and 4m working widths, in grain-only configuration although a 6m version will be available in 2016. Capable of handling grain and fertiliser, the combined hopper becomes an option on all models. The Saxon shares its chassis and hopper with the Centurion, but has different working elements which include 430mm Turbo-Coulter blades with a fluted profile and which run straight in line with the direction of travel creating a 30–50mm zonal seeding strip. These are capable of cutting through large amounts of trash with minimal disturbance, including growing cover crops and are ideal for establishing crops in a friable surface. The Centurion, by contrast, uses 500mm cultivation discs enabling more traditional seedbed cultivation prior to the leveling board, consolidation tyres and rear double disc openers with all cultivation elements individually adjustable by hydraulic control. The latest Spartan is available in 6 and 9m working widths and folds to 3m for transport. It is equipped for grain and fertiliser use, with a total hopper capacity of 5,780 litres. With a 3m transport width it has been designed for European use. The Spartan offers a no-frills specification but is available with new advanced

options including a hydraulic-driven metering system offering variable rate drilling. Previously only a mechanical metering system was available. The metering system uses cassettes, each capable of handling a range of seed sizes and making it easy to change between crops. Although the Spartan has been available for a number of years, its new specification options, ease of use and ability to drill effectively into hard stubbles makes it an attractive choice for those looking for low cost establishment. Wider models are under development and David said there is huge potential for the drill to become more widely used with increased interest in controlled traffic farming. Recent developments include rear wheels which run in line with the main front wheels previously the rear castor wheels ran on a separate track within the drilling width.

X-Press new models The X-Press short disc harrow has been a very successful tool for farmers across Europe since its production started in the UK more than 10 years ago, when it was launched as a trailed model. It was the first short disc cultivator with easily adjusted disc angle, allowing it to be altered during the season for working different soil types and to suit varying conditions. In recent years, with Great Plains’ influence, the X-Press has been gaining popularity in the USA, as demand has increased for a compact disc harrow with rear roller consolidation, and the

Discs are mounted in pairs and the working angle can be adjusted manually to three fixed settings between 0–25 degrees or infinitely using new hydraulic adjustment, making it easy for the operator to optimise performance from the tractor cab.

medium-sized 5.5–6.6m models have been a popular choice to meet this requirement. Announced for 2016 are new mounted and trailed models, with an all new frame but retaining the main principles which have made it such a success including two rows of discs and a rear consolidation roller, capable of high-speed stubble cultivations. More than 1,500 of the previous mounted model were sold in the UK, with demand including mixed and primarily livestock farms as the tractor size requirement is from just 100hp. The new mounted range includes models of 3.0, 3.5 and 4.0m working width, with a power requirement of 70–180hp. The all-new main frame is tubular, for added strength, and it has been designed to provide space around the working elements to cope with large quantities of trash while also accommodating additional tool options, including a leveling board for secondary cultivations – previously only available on larger 8–10m trailed models. The hitch geometry has been altered to ensure optimal performance behind continued over...

The mounted versions, from 3–4m working widths are also significantly upgraded with a new tubular chassis to accommodate further working element options including a new levelling board.

December 2015 www.farmersguide.co.uk 37

24-49 ROP Dec.indd 37

16/11/2015 15:58

The DD500 rear press is a popular option in the UK. ...from previous page

modern higher-horsepower tractors and the front hitch points have been shortened, resulting in a more compact machine than the current version. The new X-Press is equipped with side deflectors as an option to ensure a level finish between bouts. Depth control has been brought in to line with other Great Plains products, and uses coloured shims of different thicknesses to restrict rear packer travel. The ability to match the X-Press to a wide range of soils is ensured with a choice of six rear packers’ - Maxilift, Heavy Duty, Open bar, Aqueel, V-Roller and DDL550, with further options due to become available late in 2016. Most mounted X-Press cultivators are used behind an ST Bar, for soil loosening by tines ahead of the discs. The ST Bar is capable of working down to 250mm and can be fitted with low-disturbance or ST tines. The new headstock design, like that of the X-Press, has been modified to suit modern tractor linkage dimensions.

Trailed X-Press new models The larger trailed X-Press cultivators have been improved and upgraded too, and the range now includes 5.0, 6.0 and 7.0m working widths, alongside current 4.5, 5.5 and 6.6m widths. “The demand for large cultivators capable of achieving soil movement across the working width even at shallow operating depths is increasing,” explained David. “However, there is also demand for the cultivator to offer the flexibility

The discs are mounted on heavy-duty bearings at an angle which produces a tearing action, pulling the soil up and across, rather than smearing it sideways.

to operate at the same depth but with low disturbance as well as to be capable of providing a finished seedbed as a secondary cultivator within a plough-based system. The X-Press is versatile enough to use for primary and secondary cultivations within any establishment regime, especially with the new leveling board option.” Like the new mounted versions, the trailed X-press has an all-new main frame and chassis, and the disc layout has been modified from the previous X-shape to an offset configuration for optimal leveling, with the two rows of discs at opposing working angles. A new patented intermeshing leveling board option is available, the leveling tines running in line with the gaps between the rear roller DD rings, for example, to improve leveling and seedbed finish. The leveling board is manually adjusted, or there is hydraulic adjustment available, allowing its action to be matched to the working conditions. Side deflectors can be fitted, which offer a particular benefit for high speed operation on lighter land. Hydraulic depth control is an option, with the coloured spacers limiting working depth as on mounted models. Added convenience is provided by hydraulic transport locks, allowing the implement to be folded and unfolded without the operator leaving the cab. On both trailed and mounted models, disc choices include different sizes and profiles for the front and rear rows for progressive operation. Notched cultivation discs or SoilRazor discs, both available in 508 or 560mm diameter can be fitted and for mounted models only, Turbo Coulter blades are available. The SoilRazors are ideal for chopping tough residues such as maize, while the 515mm Turbo Coulter blades, available only for use on models with limited disc angling, are designed for minimal disturbance. David said that the ability to fit larger diameter rear discs will be popular, as it provides progressive cultivation through the soil depth as well as optimal stability. The two rows of discs are individually mounted and have leaf-spring protection against stone damage with a trip height of 120mm. Discs spacing is 250mm across each row providing an average spacing across the machine of 125mm. Drawbar coupling is through the lower-link arms, which provides an articulated hitch advantage for tight headland turns. All new X-Press models include the ability to adjust the disc angle, with limited disc angling via three

The ST Bar has been updated to accommodate the new X-Press mounted cultivators.

fixed settings of 13, 17 or 21 degrees, or full disc angle adjustment across the range of 0–25 degrees. Discs are mounted in pairs for stability. Either manual or hydraulic adjustment of the full disc angling is available on both trailed and mounted models. “The main applications for the range will continue to be within reduced cultivation systems, to incorporate stubble and to work down ploughing,” said David. “Now available with minimal disturbance Turbo Coulter discs or conventional notched blades with full disc angling, the new X-Press provides further flexibility as part of a cultural system of grass weed control. The disc angle of the X-Press is extremely effective as the disc bearing angle results in the disc producing a tearing action rather than smearing the soil.” Deliveries of the new X-Press are due to commence early in 2016 and prices will be announced at Agritechnica. At the top of the X-Press range, the current 8–10m models are retained and production will continue, but updates will include additional disc options, as introduced on the smaller models.

Revolutionary fertiliser application An innovative fertiliser placement system was presented at the press day, which will allow farmers to maximize yields while reducing liquid fertiliser use. AccuShot will soon be available as an option on Great Plains’ Yield-Pro maize planters and consists of an application nozzle linked to a sensor which applies a specific quantity of liquid fertiliser exactly where needed each time a seed travels down the seed chute. Rather than dribbling a continuous line of fertiliser, AccuShot applies a predefined dose of nutrients and the applicator can be adjusted to place the fertiliser exactly where

needed either close to, or adjacent to, the seed. Having entered the desired application rate and input-to-seed proximity in the control screen, the application begins as the seed passes the seed tube sensor, triggering a time delay, equal to the amount of time needed for the seed to travel to the ground. A second delay is then started to offset the beginning of the liquid application from the seed location and the valve is opened from a pressurised manifold. A metered amount of fertiliser is then released into the pre-charged metering tube forcing a check-valve to open at the seed trench, where the fertiliser is delivered. “Because the fertiliser is applied exactly where the seed will use it, users can reduce input costs without reducing yield potential or maintain the same input costs to increase yield potential,” explained David. “It also offers great environmental benefit as the amount of unused chemical released into the soil is reduced.” AccuShot has been tested successfully during maize planting for the past four seasons, and the applicators are expected to be available in limited numbers from 2016. Great Plains believes the technology offers further opportunities for use applying growth regulators, insecticides and seed treatments and will be engaging in further trials of the system during future seasons. ■

Hitch options for the larger trailed models include this articulated lower-link version for tight headland turns.

38 www.farmersguide.co.uk December 2015

24-49 ROP Dec.indd 38

16/11/2015 16:03

All of your tillage requirements covered. LEMKEN – for optimum seedbed preparation and the best crop establishment. Contact your local MARSH or SEWARD branch today to book your on-farm demonstration.

Brigg Tel: 01652 651810 Markham Moor Tel: 01777 838888

Sleaford Tel: 01529 303093 Ulceby Cross Tel: 01507 462288

Catfoss Tel: 01964 545300 Sinderby Tel: 01845 567407

Wilberfoss Tel: 01759 388811

The Alpego AS4

Folding Combination Drill – from 4 to 6m The patented transfer system can save your business up to 12% on seed This perfect combination of rear metered seed and front bulk seed storage helps to keep the tractor balanced “NoBlock” coulters can achieve 60kg/disc pressure For tractors up to 350/450hp* and has a 3 Year Drive Train Parts and Labour Warranty** as standard Transport width of only 2.5m

The Best Technology in the Field

www.alpego.co.uk

0% Finance 0+2 Annuals deferred for 4 months or 1+2 Annuals (10% deposit required) terms and conditions apply

1. Front hopper requires no services – 1400/1800L capacity 2. Small diameter “easy-fit” transfer pipe 3. Automatic vacuum seed transfer system 4. Rear hopper with 150L capacity for accurate seed flow 5. Volumetric stainless steel, radar controlled metering unit 6. Hydraulic fan and tramlining system 7. Short distance from metering unit to coulters via distribution head 8. “NoBlock” coulters with 44cm front/rear inter disc clearance 9. Parallelogram linkage to the packer roller * DK-350hp/DmaX-450hp ** Excludes PTO Shafts

sales@alpego.co.uk 07770 013229 12R35B

December 2015 www.farmersguide.co.uk 39

24-49 ROP Dec.indd 39

11/11/2015 13:03

Thurlow Nunn Standen Ltd “Leaders in every field”

It’s the start of something new

HOSPLANT Sales Ltd

Call Richie Hannant TNS Valtra brand manager

St Ives Farm Buildings, Peldon, Colchester, CO5 7QD 01206 735558 | enquiries@hosplant.co.uk www.hosplant.co.uk

07798 585609

valtra.co.uk Valtra is a worldwide brand of AGCO

www.tnsgroup.co.uk

THE BLACKBURN POTATO CHITTING CRATE Approximately ½ Ton capacity

• Axles - Stub axles

• Tandem and tridem

Quicker and easier than wooden Chitting boxes

• Bogies • Hydraulic & pneumatic suspensions • Wheels and tyres

Saves money For further details contact:

PELLCROFT ENGINEERING LTD • Coningsby • Lincs • LN4 4SE Telephone: 01526 342466 • Fax: 01526 343507 www.pellcroft.com

Agricultural Running Gear Specialist

•Professional and knowledgeable staff committed to excellent customer service. •Vast stock of all types of running gear to suit many applications. •Proven and tested high quality products. •Comprehensive stock of genuine ADR spares with next day delivery on most items.

• Spare parts and accessories

12R22B

Less handling Less labour Less damage

Coldham Road

ADR UK | TYREMART

• Steering axles

•Technical support from the world leader in the manufacture of agricultural running gear.

ADR UK - TYREMART AGRICULTURAL LTD

Main Road, Long Bennington, Newark, Notts, NG235DJ GREAT BRITAIN Tel. +44 1400 283820 - Fax +44 1400 283137 email : info@tyremartagri.co.uk | www.tyremartagri.co.uk

40 www.farmersguide.co.uk December 2015 ADR UK General - 93x130 +5.indd 1

24-49 ROP Dec.indd 40

29/06/2015 10:19:30

11/11/2015 14:47

Tractor range updates will impress loyal and new users The popular N-series tractor lineup from Valtra has been updated, the latest N4 versions including many of the key features introduced on the larger T4 series models during 2014. David Williams reports. The 4-cylinder N-series has been a great success for Valtra since its introduction in 2005, with approximately 37,000 machines delivered of which some 3,000 are working in the UK. Valtra has always enjoyed a reputation for pushing the boundaries in terms of the power available from its tractors and the new N4 series upholds this tradition, with up to 185hp available from the flagship N174. New styling and a brand new cab are the most obvious features of the new models; the cab borrowed from the larger T4 series following a total redesign from scratch last year. The current N-series cab has been popular with users, but the larger cab with its clean and spacious layout offers many advantages including improved comfort. There are six models in the range, offering 105–165hp (rated) with an extra 10hp available in transport mode and an additional 20hp for the N174 for transport and PTO use. There are four variants; HiTech, Advance, Versu and Direct, offering different combinations of transmission and hydraulic specification.

Engines Power is provided by AgcoPower 4-cylinder engines, with 4.4-litres capacity for the N104, N114 and N174 models and 4.9-litre engines in the N134, N154 and N174 machines. All meet Tier 4 final emissions regulations, using just SCR (Adblue), so there is no need for a diesel particulate filter or exhaust gas recirculation, and Valtra claims its solution reduces fuel consumption and extends the engines’ working life. Common rail fuel injection aids fuel efficiency while an electronically controlled waste-gate on the turbocharger helps provide a flat torque curve. Valtra’s Sigma power control provides 10hp extra when the PTO is under sufficient load and at higher transport speeds on all models except the flagship N174 which gets an extra 20hp. Further economy is provided by the EcoPower models; N114 and

Valtra has announced all-new N-series tractors incorporating design updates from the T4 series, introduced last year. The range includes the N174 with up to 185hp available from its 4-cylinder AgcoPower engine.

N154, which have a selectable Eco operating mode, reducing engine speed by up to 20 per cent and fuel consumption by up to 10 per cent, compared to standard operating mode. A brand new development, likely to be a future option on other Valtra tractor series is Eco ASR, which offers wheel slip control, effective with both linkage mounted and trailed implements.

Transmissions and hydraulics Options include Powershift or CVT, HiTech, Active and Versu variants all equipped with 30-speed power shift through four ranges, while the Direct model has CVT. A new function, introduced on the T4-series tractors, is automatic shifting of gears on power shift models, ensuring the tractor operates at maximum efficiency and demands on the driver are reduced, while Hill-hold makes it easy to move away from standstill on slopes. The new N4 tractors share these features, both of which will be popular. Transmissions provide 40 or 50kph transport speeds with 50kph standard on the CVT models. The wheelbase is 2,665mm and the N4 models are very manoeuvrable with a turning circle of just 4.5m. Tyres up to 710mm width 0can be accommodated and there is a new hydraulic actuated front suspension system, which can be locked out for loader work. Ground clearance,

depending on tyre size, is up to 55cms. Active, Versu and Direct models all have load-sensing hydraulics with flow options of 115, 160 or 200 litres/ min. The base HiTech variant uses a gear pump with 73 or 90 litres/min flow rate available. HiTech and Active models have mechanical hydraulics, often preferred by livestock and smaller mixed farms while the higher specification Versu and Direct machines use electronic control for greater efficiency and can be equipped with up to seven hydraulic couplers at the rear with up to four at the front. Separate oil reservoirs are used for hydraulics and transmission on all except HiTech models. Hydraulic assistant is standard. This is another feature introduced on T4 models which speeds up hydraulic operations such as loader work while providing fuel savings as the hydraulic system supplies oil flows to match demand, speeding up the engine when necessary, for example when loader controls are moved to their maximum position. The rear hitch capacity is up to 8t, on N134, N154E and N174 models, courtesy of new hitch geometry and the optional front hitch has a capacity of 3.5t across the range. The PTO offers three speeds as standard with ground speed an option.

The N4 is ideally suited to loader work with excellent visibility all around and a very tight 4.5m turning circle.

Cab updates The new N-series has a cab almost identical to that of the larger T-series, updated last year, and offers superb visibility all around courtesy of up to 6.5m2 of glass. Heated front and rear screens are an option along with a front wiper covering 270 degrees and continued over...

The N4’s cab is superb, having been designed from scratch for the larger T4 series introduced in 2014.

December 2015 www.farmersguide.co.uk 41

24-49 ROP Dec.indd 41

14/11/2015 15:59

Est 1992

Suppliers and Installers to:

Agricultural, Industrial and Domestic

Jacobsens-GFM Contact: Symon Jacobsen Tel 01561 361 340 • Mob 07973 542 142 Email: symon@jacobsens-gfm.co.uk www.jacobsens-gfm.co.uk

Specialist Plastic Tank Distributor

Väderstad Main Dealer for Perthshire & Aberdeenshire

Our range includes: bunded tanks, oil tanks, Ad Blu tanks, petrol interceptors, sewage treatment plants, septic tanks above ground and underground tanks for storage of oil, chemical, water etc

• available in 6’/8‘/10’ widths

Front Linkages & PTOs

Please phone for a FREE Product Pack & friendly advice

BEST DEALS CALL US FOR THRETA NKS ON WATE E-mail chrisglass@hessettgrain.freeserve.co.uk Website: www.hgtanks.co.uk Contact Chris Glass

• 2.7 ton – 5.0 ton lift capacity • fixed, floating or folded positions of lift

Tel/Fax 01359 270736 Mobile 07860 352739

The Street, Hessett, Bury St Edmunds, Suffolk IP30 9AZ

Available for § Case § Claas § Deutz § John Deere § Landini § Massey Ferguson § McCormick § New Holland § Steyr § Zetor § Valtra § Kubota

12R10B

• loader compatible • PTO can be retrofitted at any time

Jacobsens-GFM

12R42B

We also provide Accessories & other products

Remove slimy pests from Re your crops with a Honda y ATV and Slug Pelleter A from Fieldens ffrr

Fieldens provide ■ ■ ■ ■

Support of a Honda ATV main dealer with skilled, trained staff. Stocks and Logic accessory Main Dealer Special rates for ATB approved operator training courses Large selection of used Honda ATVs always in stock

Call Keith Collins for helpful advice and a personal quotation

(Wheels, Tyres and ATVs) Ltd Starhouse, Onehouse, Stowmarket, Suffolk, IP14 3EL Tel: 01449 675071 Fax: 01449 678282 E: sales@ﬁeldens.co.uk

www.ﬁeldens.co.uk

42 www.farmersguide.co.uk December 2015

24-49 ROP Dec.indd 42

11/11/2015 15:29

Valtra’s TwinTrac reverse drive cab option allows the operator seat to be swiveled 180 degrees. A rear steering wheel is slid to one side when the tractor is driven normally, but it can be positioned anywhere across the rear for reverse drive operation.

Cab access is excellent, but the steps are easily raised for operation in areas where ground contact could occur.

...from previous page

a roof screen for improved visibility for loader work. The exhaust stack and air cleaner intakes are both restyled and are directly in line with the front cab quarter pillars, which makes them barely noticeable from the seat. One door is standard but two doors are available as an option, providing greater efficiency for those frequently entering and exiting the cab. Noise levels are impressively low at under 70db and there is a wide range of options available to provide additional comfort. An air suspension system is a new option, offering a further upgrade from the mechanical spring arrangement used previously. TwinTrac reverse drive is a further option allowing the operator to rotate the seat to face the rear, for reverse drive operations, providing greater

Test drive

The brand new Automatic Slip Regulator allows the operator to program the engine and transmission so that wheel slip is controlled, for optimum efficiency. The operator sets the appropriate amount of wheel slip in five stages to suit the task being carried out and the engine and transmission act together to reduce torque to the wheels where slip is too high.

The control panel of the new N-series Active specification tractor. Powershift transmission and load-sensing hydraulics are standard.

efficiency for tasks such as grass mowing. A new option is a SkyView forest cab, designed primarily for forestry users with a large polycarbonate window, complete with wiper, in the rear section of the roof.

Sophisticated hydraulics are available on Direct and Versu models. Rear lift capacity is now up to 8t.

regulate the amount of slip, and works by adjusting the engine and transmission together to control the amount of torque supplied to the wheels, so is especially effective for trailed implements where traditional linkage draft control isn’t available. By backing off engine speed and selecting a higher gear when wheel slip is high, wheel slip can be reduced and fuel savings can be achieved. The operator can select the ASR through five stages to suit the task being carried out. ASR is proving immediately successful and is likely to be standard on other Valtra tractor series, starting with the T4 models from 2016.

Servicing and daily checks

Improved efficiency AutoGuide automatic steering is available as an option across the range, and telematics are also available, offering benefits such as remote diagnosis of problems. All Valtra N4 tractors delivered before the end of 2015 will be equipped with Valtra Smart remote diagnosis telematics accessible through the My Valtra owner gateway. A revolutionary new option is the Automatic Slip Regulator (ASR). This allows the operator to

levels checked by sight glass, the tractor can be ready to work in just a few minutes. Valtra UK sales manager Mark Broom commented; “The new N4Series product line-up gives us a new 4-cylinder product, which takes many of its new features from the already acclaimed and successful T4-Series, without compromising the size and specification that customers are looking for in a 4-cylinder tractor. We are confident that this new series will allow us to continue to build our already strong market share in the 100-180 horsepower 4-cylinder sectors.”

Electric extending mirrors are an option, allowing the operator to retract them for protection when not required, but to extend them at the touch of a button when working with wide trailed loads.

Standard fuel tank capacity is 250 litres, but up to 315 litres is an option, allowing longer working days without needing to refuel. Adblue capacity is 45 litres, more than enough for 2–3 days’ work depending on the application. Valtra has reduced the service frequency for the new tractor compared to the current model, with intervals extended to 600 hours. The new Valtras require just five daily checks and with all the routine engine service points on the left-hand side, and transmission and hydraulic oil

The UK press event, on a farm in Warwickshire, provided an opportunity to try out many of the key features of the new N4 models. Access to the new cab is excellent, with plenty of space for a tall operator to enter and exit. The control layout is very logical and the dashboard is clear and easy to read. Noise levels are low, enabling easy conversation in the cab even with the engine speeds well up. The power shift transmission changes smoothly when in auto mode, allowing the operator to concentrate on the implement and work area. Some steep slopes provided a good test of the new hill-hold feature, which required the operator to stop the tractor on the incline, put a foot on the brake and then move the shift lever to park and back to forward again. With the brake pedal released, the tractor remained stationary on the slope, moving away as soon as the accelerator pedal was depressed. One of the demonstration machines was fitted with Valtra’s guidance and auto-steer system and this proved easy to use with minimal instruction required prior to the test-drive.

Verdict The new N4-series tractors are great to drive, with a superb working environment provided by one of the latest cabs in the industry. No other production 4-cylinder tractor offers more power than the flagship N174 and for those looking for a very capable lightweight and maneuverable tractor for field tasks such as operating a power-harrow drill combination, there are several options in the latest Valtra range.

Valtra NX articulated tractor Valtra’s Unlimited studio provides the opportunity to have a tractor produced to any possible specification, including some continued over...

December 2015 www.farmersguide.co.uk 43

24-49 ROP Dec.indd 43

14/11/2015 16:02

T4 range extended Missing from Valtra’s T4 series line-up until now has been a base HiTech specification. HiTech models offer powershift transmission and mechanical hydraulics and are often the choice of livestock farms where the complexities and added cost of sophisticated electronic controls are not needed. The base standard specification doesn’t mean the owner is deprived of efficiency aids, however, and the tractors are equipped with automatic shifting of the transmission, hill-hold, auto-traction and hydraulics assistant. One option fitted was fast steer which provides the operator with 2-speed steering, allowing fewer turns lock-to-lock for low speed tasks

The NX articulated version of the N series offers extra versatility for loader and fieldwork. ...from previous page

very specialist options. Providing extra versatility is an articulated chassis for N-series machines, with the fulcrum just in front of the cab. Further versatility is provided by the conventional steering front axle which, when used with the articulation, allows extreme maneuverability and improved efficiency for field operations including the ability to set the wheels to track for headland turns and a crab operating mode which means none of the four wheels track. Spreading the weight across a much wider working area is great for tasks such as

drilling where constant consolidation across the width is a benefit. Driving the NX tractor around the test route allowed all the steering mode options to be explored. The articulated upgrade is priced at £12,500 and it offers significant advantages for tasks such as loader work, where the articulation provides a large degree of movement for lorry loading.

The T4 series now includes a base HiTech version, with mechanical hydraulics, which is expected to be popular with livestock farms.

such as loader work, and less reactive steering for higher speed transport tasks. T4 HiTech hydraulics are fed by a gear pump providing either 73 or 90 litres/min of oil flow whereas the other models in the series have loadsensing hydraulics offering up to 200 litres/min. ■

Three of the Valtra UK team at the event (l–r) Valtra UK sales manager Mark Broom, sales support product specialist Jamie Warner and sales support manager for the UK and Ireland Alan Sanderson.

TRACTOR & FARM INSURANCE

TRACTORS

Are you paying more than this?

Value £3,000 £7,000 £15,000

Comprehensive Premiums from Single Tractor On Fleet £107.31 £72.94 £177.82 £122.52 £296.00 £231.18

P w yo

Trailers & Implements included on comprehensive fleet cover

MOTOR

EXAMPLE: Daihatsu FourTrak Commercial 2.8 pickup, 1995 model farm, SD&P & business use. Based on: Postcode: DT10 Driver: age 55. A fleet policy. Two named drivers over 25. Full bonus.

from £159.00 Comprehensive (£150 excess)

BESPOKE SOLUTIONS:

FARM

QUALITY CROP STORAGE

If you want is to search for the most competitive rates, contact us for a quotation. Hundreds of farmers have benefited from savings

Leek farmer reduced premiums from £1,357 to £941 Chester farmer reduced premiums from £5,100 to £3,812

Whether it is a grain store, refrigerated crop unit or a grading and packing plant, we offer a full design and planning service from concept to completion. From supply only to a full turnkey project, our dedicated team will deliver a quality building.

FINANCE

Mortgage & refinancing facilities from numerous lenders. We can visit to discuss your requirements

Tel:

01332 362367 or Fax details on:

01332 296808

t: 01284 799635 e: eastern@robinsons.com e : sales@robinsons.com w : robinsons.com Wincanton Close, Ascot Drive, Derby DE24 8NJ

12R33B

We are independent brokers (est.1982) specialising in agricultural insurance, dealing with numerous insurers and hundreds of farmers throughout the UK. Authorised & regulated by the FCA

STRUCTURES LTD

For more contact our Suffolk office: t : 01332 information, 574711 f : 01332 861444

Company registered in England & Wales No: 07378233. VAT number 119118723. Midlands: (01332) 574711 e: sales@robinsons.com Southern: (01273) 911770 e: southern@robinsons.com

44 www.farmersguide.co.uk December 2015

24-49 ROP Dec.indd 44

16/11/2015 18:03

1746

BLUE MEANS VITALITY THE SOLITAIR PNEUMATIC SEED DRILL – VERSATILE FOR UNIVERSAL APPLICATIONS

3 YE A R S E 0% F I N A N C * AVA I L A B L E

The Solitair series offers farmers a range of tailor-made solutions: with working widths between three and twelve metres, mounted rigid and folding versions and even a semi-mounted folding range, the Solitair can be used in a very wide range of conditions, either in stand-alone operation or in combination with soil cultivation implements. Benefit from its numerous advantages: Find out more about the Solitair pneumatic seed drill at lemken.com

■ Solitronic for control and monitoring of all major seeding functions ■ Versatile combinations with compact disc harrows, cultivators, power harrows and seedbed combinations ■ Can be quickly demounted from one cultivator and moved to another ■ Precise transverse seed distribution with seed distributors directly above the coulter bar

* On new LEMKEN machines purchased between 01/10/2015 and 31/12/2015. Terms and conditions apply, ask for details.

www.lemken.com

EXTRA MUSCLE

Has your tractor got the LYNX FACTOR?

Performance-enhancing Zuidberg, PowerTech and Flexxaire technology. Plus advanced weight systems and quality-engineered front linkages. Lynx has got what it takes to help you harness the full power and potential of your tractor, while reducing your running costs.

Zuidberg ECO-TWIN Front PTO

PowerTech Engine Tuning

Flexxaire Engine Cooling & Radiator Cleaning

• Full engine hp output at 1000 rpm • Soft start system • Fuel-saving ECO-mode selectable from cab

• Improve power and torque output • Haul more and work faster • Fully compatible with your tractor

• Cleaner radiators maximize performance • Advanced cooling increases power availability • Reduces downtime

For further details about the Lynx range,

01327 843215 www.lynx-engineering.co.uk

call Lynx Engineering today on ENGINEERING

More ways to add more productivity

1746 1 Hpage 24-49Lynx ROPPower Dec.indd 45 ad FGuide .indd 1

or visit

Lynx Engineering, Wharf Works, Long Buckby, Northampton NN6 7PP Email: info@lynx-engineering.co.uk www.lynx-engineering.co.uk

12/11/2015 13/11/2015 13:03 15:15

THE ALL NEW

L200 SERIES 5 SHOWING THE WORLD HOW ITâ&#x20AC;&#x2122;S DONE

Best in class total load capacity, performance, 4WD ability, manoeuvrability, economy, emissions & safety. Put simply, itâ&#x20AC;&#x2122;s the best pick-up on the market.* Test the best | Visit mitsubishi-cars.co.uk to find out more. *Competitor comparisons are made against all equivalent models in the segment and correct at time of print.

24-49 ROP M38400 Q4 Dec.indd 2015 L20046 Series 5 Farmers Guide Mag 297x210.indd 1

12/11/2015 11/11/2015 15:02 14:12

Picking up the mantle The new L200 is an ideal dual-purpose vehicle for farm and family use.

The Mitsubishi L200 has become a common sight on UK farms with an enviable reputation for practicality and reliability. The current version has outsold all other pick-ups since its arrival to the UK in 2006, according to the manufacturer and this means its recently launched replacement, the Series 5, has a hard act to follow. David Williams has been test-driving the latest version. The vehicle provided for the weeklong test was a base specification double-cab, 4Life manual model, powered by an all-aluminium, 2,442cc 4-cylinder diesel engine developing 151hp. The range includes higher specification Titan, Warrior and Barbarian versions, all available with automatic or manual transmission, and all equipped as standard with a more powerful 178hp version of the engine. The Mitsubishi pick-up layout clearly separates the passenger cabin from the load bed, and makes the most of every inch of space available with a generous load area of 1,470x1,470mm, but plenty of room in the cab for four adults to travel in comfort. The new L200 is designed for extra rigidity over its predecessor and its rated load bed capacity

is 1,045kg and maximum towing capacity is 3,100kg for a braked trailer. This makes the L200 extremely capable with a combined load bed and towing capacity of 4.1t. The L200 has a 3m wheelbase and 200mm ground clearance, and the turning radius is a tight 5.9m. The suspension is uprated considerably over the previous model, with stiffer front springs, significantly longer rear leaf springs, a larger suspension stabiliser bar and improved damping, which means that while handling is improved, the ride remains very comfortable. Hill start-assist is standard across the range, keeping the brakes activated for up to two seconds after the foot pedal is released, until the accelerator pedal is applied.

The base specification 4Life version tested is well-equipped and comfortable, with plenty of space for the driver and passengers.

Great use of space Despite its position at the base of Mitsubishiâ&#x20AC;&#x2122;s specification ladder, the L200 4Life is well equipped and comfortable. For a vehicle with such a generous rear load bed, the cab section has plenty of room, with decent sized doors front and back making it easy to get in and out. The seats are firm but comfortable and there is height adjustment for the driver, which ensures plenty of headroom. Leg and head room front and rear is adequate for taller passengers although, with the front seats slid fully back, space at the rear becomes more limited. The dashboard is well laid out with everything easily to hand. Cruise control and Bluetooth phone controls are all on the steering wheel, and there is a simple trip

computer, which requires multiple button presses to reveal information including fuel consumption, range and trip distance. The main dials are easy to read, indicating speed and engine revs, but less user-friendly is its bar-type fuel gauge which lights up in segments to indicate the fuel level, so it is easier to rely on the remaining range function of the trip computer for accurate information when the level becomes low. Heating and ventilation are excellent, and the manual air conditioning system is powerful. Climate control becomes standard on the Titan which is the next model up. Storage options in the cab are good, with two small receptacles near the gear lever and a cd-sized compartment below the radio. There is a decent storage space in the front centre armrest and large pockets in both front doors. At the rear there is storage in both doors and a large concealed toolbox area below the rear seat. Headlights switch on and off automatically when light conditions change, and angle adjustment is provided through a switch on the dashboard. Headlight delay is included, making it easy to lock up and walk away from the vehicle across a muddy or obstacle cluttered yard at night. Visibility all around is excellent, and there are decent sized, heated door mirrors that offer a good view for reversing and manoeuvring around a confined yard. One feature missing is electric adjustment and folding of the mirrors, which becomes standard on the Titan specification, and would be a useful addition for many farmer users. continued over...

Decent sized doors make access easy and there is adequate head and legroom for longer journeys.

December 2015 www.farmersguide.co.uk 47

14:12

24-49 ROP Dec.indd 47

14/11/2015 16:30

...from previous page

Servicing Service intervals are 12,500 miles or 12 months and the standard warranty is five years or 62,500 miles. The diesel tank capacity is 75 litres (16.5 gallons).

Performance The 151hp engine provides plenty of power, and the amount of acceleration available is surprising for a relatively heavy vehicle. Traction control is effective, and useful when pulling out of field gates onto damp road surfaces. The test vehicle was brand new, so still quite tight, but fuel consumption was 29–35mpg (official combined figure 42.8) during the test, which included mainly shorter journeys, and is likely to improve as the vehicle is run-in.

Ride and handling The ride comfort of the new L200 is excellent and, apart from the ride position being higher than that of an average car, it would be hard to tell the difference. The suspension is noticeably firm when the truck is unladen, as would be expected, but even on uneven farm tracks it is always comfortable, and there is no noise from the suspension system

The latest all-aluminium engine is rated at 151hp in the base 4Life model, and its power delivery and smoothness is superb. Access for daily checks is good, despite the packed engine bay, but colour coded check points would help users identify where checks are needed.

even at high speeds. Even a light load carried in the rear makes the ride noticeably smoother, and with 500kg in the back, the ride, on and off road, is excellent. At higher speeds on winding country lanes the pick-up handles well, and there is very little body roll on corners.

making it feel less of a commercial vehicle and more like a car. A rotary dial beside the handbrake is used to select 2wd, 4wd or 4wd with low range, and there is a separate switch to lock the rear differential. Mitsubishi claims to have the only pick-up which can be operated permanently on or off-road in 2wd or 4wd, courtesy of a new Torsen-designed centre differential, but for most of the test week’s use 2wd was selected. Off-road and across a wet, cultivated field 4wd was necessary, and the system engaged smoothly when needed and disengaged just as easily.

Verdict The L200’s stylish lines make it an attractive vehicle, but disguise the fact that it is also an incredibly functional workhorse. The latest version offers significant improvements over its predecessor, and is hard to beat for ride quality, handling and comfort, especially when its load carrying capacity is considered. Priced at £19,749, it is an ideal dual-purpose vehicle for farm and family use, and likely to maintain the L200’s reputation as one of the most refined yet rugged pick-ups around. ■

Smooth, quiet engine The new engine is smooth, whether labouring in higher gears up hills or accelerating hard and noise levels are very low, similar to those of a car. There is plenty of torque available, so there is great flexibility between the gears. The truck is easy to drive and comfortable, even for longer journeys. The manual transmission has six speeds, and the gear lever has a very short shift distance to engage gears,

V ra V

w The load bed is clear and uncluttered with the rear mudguards well forward. The tailgate is well designed with an over-centre opening mechanism which helps prevent accidental opening if the latch is operated. Internal tie down points are provided and are reasonably strong so should stand typical farm use. 12R13B

Forklift Brackets Weld on forklift & loader brackets to fit most makes & models JCB/Matbro £68.50+VAT all others POA

All major Debit/Credit cards accepted • Same day despatch

Terry Birch twbengineering@btconnect.com twbengineering.com

A1 Installations

t: 01787 474217 m: 07803 046394

ALUMINIUM GUT TERING SPECIALISTS

LEAKING GUTTERING? Seamless aluminium guttering and gutter linings for all concrete, asbestos and metaI valley gutters. Ideal for Atcost, Crendan and Tyler type barns.

DI TR SC AD OU E NT S

07966 233104/01529 455776

e: dane@a1installations.co.uk 12R38B

WE OPERATE NATIONWIDE

The material has a life expectancy in excess of 30 years. Please call or email for a free quote.

www.a1installations.co.uk STAR STILE HOUSE, COLNE ENGAINE ROAD, HALSTEAD, ESSEX CO9 2RP

DOMESTIC • INDUSTRIAL • NEW BUILD • AGRICULTURAL 48 www.farmersguide.co.uk December 2015

24-49 ROP Dec.indd 48

14/11/2015 16:47

The new Rapid A…

a powerful drill for future farming New Rapid A • Reduced maintenance • Improved performance • Makes driling simpler

SeedEye • Unique seedcounting technology

Väderstad’s Pre Season campaign provides exceptionally good deals across the whole Väderstad range along with the offer of 3 years interest free finance. So there can be no better time for Väderstad to launch the new Rapid A range of seed drills.

www.vaderstad.com Half page Autumn 15 oos.qxp_Layout 1 22/09/2015 16:49 Page 1

Were you caught out by the weather again when baling this year? Invest now in a Harvest Tec system with BALER’S CHOICE for our best ‘Out of Season’ prices!

Preserve it at its best Available from:

Harvest Tec 600 Series equipment: - Precision moisture monitor - Automatic Applicator - Bale ID Tagger (not available in all markets) - Wet Bale Dye Spray Marker - GPS Yield Mapping modules

Maximise your baler’s potential by up to 30%

Contact your dealer now for the best deals or PFC on 01805 603363

December 2015 www.farmersguide.co.uk 49

24-49 ROP Dec.indd 49

11/11/2015 16:51

All of your tillage requirements covered. LEMKEN – for optimum seedbed preparation and the best crop establishment.

Contact your local CLAAS Western branch today to book your on-farm demonstration. WESTERN Bibury Tel: 01285 740408

WESTERN Winchester Tel: 01962 774590

WESTERN Evesham Tel: 01386 872862

WESTERN Frome Tel: 01373 831832

WESTERN Marlborough Tel: 01672 569900

WESTERN Dorchester Tel: 01305 849000

claas-western.co.uk facebook.com/CLAAS.Western

Ag Leader Integra

Norac UC5 Compatible AgFiniti wireless data transfer & remote display viewing OptRx Crop Sensors, “on the go” variable Nitrogen DGPS-RTK/Autosteer ISO Compatible Telephone 01228 580372 www.precise-solutions.co.uk sales@precise-solutions.co.uk Correction Services for every situation F1RTK, RTK corrections F1DGPS, Nationwide Enhanced DGPS

50 www.farmersguide.co.uk December 2015

50-67 ROP Dec.indd 50

12/11/2015 11:35

New maize cracker improves milk yields Claas has announced updates to its forage harvesters for 2016, including a wider range of maize crackers to get the most from the crop. David Williams attended the launch event held on a large dairy farm in Lower Saxony, Germany.

The latest Jaguar 900-series harvesters feature new engines meeting Tier 4 final emissions regulations and offer fuelsaving technology.

One of the two new maize crackers is based on a design by US-based Shredlage from which Claas has purchased the manufacturing and distribution rights. The 250mm diameter Shredlage maize rollers, which fit into the Claas Multi Crop Cracker (MCC), look at first glance like conventional cracker rollers, but the main difference is that the aggressive saw-tooth conditioning teeth are laid out in longitudinal spirals on each roller, so that as the crop is drawn between the pair it is torn sideways as well as being crushed and torn lengthways. This increases the chopped crop surface area available for bacteria in the cows’ rumen to work on. The principle of increasing the surface area is similar to that used for maize to power anaerobic digesters, where the simple technique of using a shorter length of chop exposes more surface area to the bacteria during the anaerobic reaction. However, because the cow’s digestive system, with a similar churning effect to a washing machine, relies on material of greater length to function properly, feeding short-chopped forage can cause significant health problems. Inspired by the processing result from an old worn-out harvester, US-based dairy nutritionists Roger Olson and Ross Dale designed the new maize processor and set up the Shredlage Company to manufacture and supply the units within the USA. Roger has considerable experience of the dairy industry, which includes being an owner and operations manager of a Wisconsin dairy farm. “Dairy cows naturally eat at dawn

and dusk and find a quiet place to ruminate while the rumen bacteria degrade the feed,” Roger explained. “Processing the crop using the Shredlage maize cracker means the crop can be chopped much longer than usual resulting in long fibres within the silage, so there is no need to feed additional hay and straw as a part of the ration. Straw added to feed is effective fibre but offers nothing else. A crop such as alfalfa added in helps, but that still has less energy density than maize silage. Replacing less digestible material with something more digestible and productive makes sense.”

Healthy cows and increased milk yields Trials carried out by the University of Wisconsin during 2012, demonstrated that even when better than average quality conventional silage is fed, cattle naturally sort out the shorter components first, but when Shredlage was fed, they didn’t try to sort it and there was an almost immediate 0.9–1.36 litre/day increase in milk production for each cow. Further benefits result from the increased availability and digestibility of starch reducing the need for concentrated feed in spite of the higher milk production. A more recent trial, the results of which have not yet been published, has also confirmed the increased milk production resulting from a change to a Shredlage diet. Shredlage forage is cut to a theoretical length of 25–30mm

Power is provided by Mercedes Benz 6-cylinder engines and offer improved fuel economy.

and the processing action means the maize kernels are almost unrecognisable. The edges of the shredded fibres are rough, and the inner cells of the plant are exposed, providing optimal surface area for rumen bacteria to attach to. Roger said it is important that the processor is set-up correctly to produce forage of an acceptable quality and he explained that the appearance should be very irregular but there should be no ‘cigarette butts’ as cattle immediately reject these. Kernels should be trashed, and almost unrecognisable, with no part larger than a quarter or an eighth remaining. “If it is too dry, then the length of cut needs shortening and if there are cigarette butts in the sample, then the rollers need closing up,” he said, adding that as a guide, when the dry matter content is approximately 30 per cent the roll gap should be 1.75mm and when it is closer to 40 per cent it should be 1.5mm. Roger has had pocket check cards made, which an operator can use to check that the processed crop from the forage harvester is within specification.

Will it suit beef? Asked about the potential of Shredlage for increased output in beef herds, Roger said the principles were identical but that because a slightly lower dry matter intake is needed, the benefits might not be quite as significant as for dairy cattle. He commented that at least one large-scale beef farmer has been using Shredlage for his herd in the USA for at least three years, and is very pleased with the results, but that no formal trials data is available yet. Claas UK forage harvester product specialist, Dean Cottey explained that most UK farmers are currently chopping grass to 16.0–25.0mm and maize to 12.0–18.0mm, when it is intended for livestock and that Claas harvesters can achieve chop lengths between 3.5–26.5mm. The farm at which the Claas Shredlage launch took place is at Bissendorf, Germany, and has been owned by the Westrup and Koch families for approximately 50 years. Arable crops are produced on 700ha, including wheat, barley and oilseed rape and there are 150ha of grass, mown 5–6 times per year, most of which is used to produce silage. Maize is grown on 250ha to make silage for feeding while a small amount is used in the farm’s 0.68MW AD plant. “We have a mild climate with temperatures up to 30–35 degrees,” explained farm

Latest developments from Claas include an optional new luxurious leather seat and the CMotion joystick option for its Jaguars.

partner Dirk Westrup, “and our annual rainfall is approximately 800mm. Our soils are medium including some sandy and some better and we achieve wheat yields of 9–10t/ha and maize yields of 50–60t/ha. The dairy unit includes 600 milkers and 600 heifers. “Our herd average is 12,200kg of milk with a butterfat content of 3.84 and protein at 3.45 and the cattle are divided between two farm units,” said Dirk. Cows are milked in a 2x20 parlour capable of milking 150–180 cows per hour and the price achieved is currently 25 euro-cents per litre plus a bonus of three cents for quality. “Last year was good, but this year we are left with little after all operating and opportunity costs are considered, but we knew 2015 was going to be more difficult with falling milk prices,” he said. The farm makes the most of opportunities to produce power from its activities and there are PV panels installed on the roofs and the slurry from the cattle is used to power the AD plant. Three engines run generators to produce electricity from the gas, providing flexibility as one engine runs non-stop while another is run from 8am–8pm each day, when power to the grid is needed. Gas is pumped to the third engine, which is based away from the digester on a neighbouring farm where the heat produced is used for a poultry unit.

Does it pack? Roger explained that when the concept was introduced to farms in the US, there was initial concern over Shredlage’s ability to be packed sufficiently for storage in a conventional silage clamp. “We have had users packing identical silage bags side by side, one with conventional silage and the other with Shredlage,” he said, “but the ease of packing was identical and there were certainly no issues caused by Shredlage. Samples from 33 clamps, of which seven were Shredlage, were analysed for quality and of the top five, three were Shredlage.” continued over...

December 2015 www.farmersguide.co.uk 51

50-67 ROP Dec.indd 51

14/11/2015 18:20

Dirk Westrup’s cattle have been fed Shredlage-processed maize during European trials of the system by Claas, and he reports a more relaxed herd as well as higher milk yields as a result of the better digestibility of the crop compared with conventionally processed maize. ...from previous page

Dirk Westrup confirmed that he, too, was worried the first time he used Shredlage cracker-processed maize in the clamp. “I work the clamp myself,” he said, “and I was concerned at first, but after 2–3 hours I could see there was no problem. There are no 3-dimensional aspects to the material and it is very fluffy, so packs in easily. The density is just as good as that of normal maize silage and the quality after storage is excellent.”

Cracker options increased Claas displayed its three cracker options including the classic version, capable of operating at its standard 30 per cent roller speed differential,

There is less sorting of the Shredlage forage by cattle as the whole crop is processed thoroughly for optimal nutrition and palatability.

Shredlage joint managing director Roger Olson (pictured) will continue to support Claas following its purchase of the Shredlage brand, with the launch and implementation of the maize processing system to the UK.

but also available with 20, 40 or 60 per cent speed differential to achieve more or less aggressive crop conditioning, as well as a new MCC Max cracker and the Shredlage processing unit. The MCC Max cracker has 30 ring segments on each roller, each ring tapered so that there is a 19mm diameter difference from the smaller to larger diameter edges. One roller has 130 teeth and the other has 120, with a speed differential of 30 per cent between the rollers with 40 per cent available as an option. The tapered ring layout means that every 20mm across the operating width the crop is cut longitudinally as well as laterally. This offers increased intensity of crop processing for maize intended for biogas plant use, but it is also suitable for processing maize used for cattle feed which means it will be popular with contractors offering a chopping service to farmers growing maize for feed as well as AD plants. The main advantage of the MCC Max is its fuel and power saving capabilities as its design means maize can be chopped longer but still have the same properties for AD plant use as short-chopped crop fed through a conventional cracker. This was demonstrated as samples of crop processed through both system types were analysed and maize which had been passed through the new MCC Max cracker with an 8mm chop length, had similar characteristics to crop passed through a conventional cracker with the chop length set at 5mm. This will allow contractors greater flexibility to chop maize for livestock farms with a longer chop length requirement, and for bio-gas farms requiring a shorter chop length without changing the chopping cylinder blade configuration.

engines are designed to operate at lower engine speeds compared to the existing Tier 4i engines and meet Tier 4 final emissions regulations using Adblue at a very low 3.5–4.0 per cent consumption rate, relative to diesel. An innovative feature is the compound turbocharger which uses exhaust gas pressure to provide additional drive to the crankshaft though a flexible clutch arrangement which is claimed to provide up to three per cent extra fuel efficiency. Optional Claas Dynamic Power engine control is used and in partial load mode, adjusts the power produced in 10 steps, achieving fuel savings of up to 10.6 per cent. The operator can select three engine power settings on the Cebis display; Maximum, high or normal and a new feature is that during harvesting, the machine always drives into the crop with full power, and then automatically tunes the engine to the most efficient setting. Cruise pilot, developed originally for Lexion combine harvesters, was introduced on the Jaguar 980 forage harvester last year, but is being made available for further models including Jaguar 940–970. Cruise Pilot allows the operator to set the target engine speed while the built-in system adjusts travel speed to suit the crop density. Three operating strategies are available including constant vehicle speed, constant output and maximum engine operating speed. Other upgrades include two different LED lighting packs and an individual key for each Jaguar machine, giving access to the ignition, cab door, as well as fuel and Adblue filler caps. Cab updates include the introduction of an additional high quality leather seat with heating and cooling built in and the CMotion joystick, introduced two years ago for Claas combines is a new option for the Jaguars.

Jaguar harvester updates for 2016 New Jaguar 900-series harvesters for 2016 have an improved optional integrated tyre pressure control system for both front and rear axles, and use one pressure line to add air to the tyre, and a second line to monitor pressure during inflation, saving time by negating the need to stop filling the tyre to check the pressure. Pre-set values can be saved on the control screen, for front and rear tyres and different operations, for ease of recall. Changes to the Jaguars’ engines include the use of a new Mercedes Benz 15.6-litre 6-cylinder power unit in the 950 and 960 models, 12.8-litres in the 940 and 930, while the largest two models; the 970 and 980 retain their current MAN V8 and V12 power units. The new 6-cylinder

The MCC Shredlage kernel processor is designed to work with crop chopped to more than 25mm, and uses two rollers with an aggressive 50 per cent speed differential. The rollers have 110 and 145 saw-tooth profile teeth which are in a pattern that creates an opposed spiral groove as the rollers rotate, which means the crop is torn sideways as well as stripped lengthways as it passes between. No full kernels should remain after treatment. The aggressive action maintains the length of chop critical for efficient rumen action while exposing the maximum amount of plant cells for bacteria to convert to energy.

The MCC Max has rollers with 120 and 130 saw-tooth profile teeth in opposing tapered ring segments; the tapered rings create a cutting or shearing edge every 20mm across the rollers at the crossing points. The rollers operate with a 30 per cent speed differential. The MCC Max is claimed to offer fuel and power savings compared to a conventional cracker when processing crop for use in AD plants as a coarser chop can be used as well as wider roller spacing. The new cracker has been awarded a silver medal at this year’s Agritechnica.

The classic maize cracker offers speed differential settings of 20–60 per cent between the rollers.

Header option for taller crops An additional new wholecrop header has also been developed, which Dean Cottey explained will appeal to UK growers harvesting tall crops such as wholecrop hybrid rye. Direct Disc 500 and 600 headers are fitted with MaxCut cutterbars to produce a clean stubble pattern. The new header no longer uses a paddle type feed rotor but has a new larger intake auger, suitable for dealing with tall crops such as rye. A 2-stage activation process engages the intake auger first followed by the cutter bar, which allows the attachment to be activated at higher engine speeds. ■

Claas UK forage harvester product specialist Dean Cottey said updates and recent options introduced for the company’s harvesters will be well received by UK farmers and contractors.

52 www.farmersguide.co.uk December 2015

50-67 ROP Dec.indd 52

14/11/2015 18:21

ANGLIAN WILLOW SERVICE LTD 12R08B

WANTED...

■ We are looking to Purchase Cricket Bat Willow Trees ■ Minimum of 5 trees – Excellent prices paid! ■ Extraction & clearance is all included ■ Free re-planting of replacement young trees

Gigant Pro

Call Geoff Watling on:

01245 349811 or 07974 575431 Email: gwatling@anglianwillow.co.uk

5 GENERATIONS OF EXPERTISE

R E T N I W S S A 1ST CL SERVICE

Bourne Rd, Carlby, Stamford, Lincs PE9 4LW

MAINTENAN

12R44B

Over 60 years experience in repairing and maintaining CLAAS combines

Visit our e for bsit NEW we ormation f more in ll our a on s product

• The largest independent spares inventory in the UK! • Master mechanics available for call out • The best value service in the Lincolnshire area • Fully detailed estimate • Out of season labour rate for early booking • Call Mike Barker or Baron Sharpe to book

Tel 01778 590 215 Fax 01778 590 282 www.easternfarmimplements.com

L G Surfacing

12R28B

Quality machinery speaks for itself

Established for over 50 years

Resurfacing with Hot Bitumen and Peashingle or Granite, and Tarmac All work guaranteed

•

Tel: 01953 458019 Mobile: 0788 40 40 100 grayroad@btinternet.com

• log decks • trailers • cranes • grapples • sawmills • winches • tree shears • log splitters • sharpeners • grabs • rotators • log handling tools

Eschlböck Biber

Automatic or manual curtain ventilation to give you total control of your building

Call now for more information on any of our product ranges!

sales@springfarmsystems.co.uk

Ireland & Scotland Tel: 028 2073 2700 Mob: 07791 751393

s pring farmsystems.co.uk

Tel: 01892 770788 Mob: 07836 274164 www.marshalllogging.co.uk

E: sales@marshalllogging.co.uk

12R43B

December 2015 www.farmersguide.co.uk 53

such

50-67 ROP Dec.indd 53

12/11/2015 14:58

JOHN RHODES A.S. LIMITED Sprayer Sales • Service • Parts

12R15B

December spray away days

email: info@johnrhodesas.co.uk

ANNUAL OPEN DAYS Tues 8th & Wed 9th December 2015 This year we are holding our annual open days at our

Evesham Depot

Shinehill Farm, Shinehill Lane, South Littleton, Evesham WR11 8TR

The John Rhodes team is devoted solely to the sales, servicing and repair of all types of crop-spraying machinery. Pictured are company engineers Richard Cooper (left) and David Frost.

Come and see these exciting machines in action! (weather permitting) • Berthoud Raptor Front Cab • Horsch PT280 with 36m boom + Boom Control Plus • Househam Spirit with Seletron individual nozzle shut off • Hardi Navigator 5000lt / 36m Delta Force ...and many others PLUS static displays This is a great opportunity to see the latest in sprayer technology demonstrated, so please come along and join us on one of the above dates...

anytime between 9.30am and 3.30pm

Refreshments and a warm welcome await you! NROSO points will be available

www.johnrhodesas.co.uk

01386 832728

Fentons of Bourne Ltd Kate’s Bridge, Thurlby, Bourne, Lincs PE10 OEN

Homburg Draincleaners UK Importer

PT280 – now with a Mercedes engine – and the Househam Spirit with individual nozzle switching. Also in evidence will be: the Berthoud Elyte with the Elypse rearfold 24m boom; the new 5000-litre Hardi Navigator with Delta Force 36m boom; the Micron Varidome asparagus sprayer; and the Team Alpha budget 12m sprayer. There will also be a wide range of other new and used sprayers on view. In addition to the working demonstrations will be static displays by Teejet, Patchwork, Billericay Farm Services, Hypro, Enduramaxx and UTV Products – all giving visitors the chance to update themselves on the latest advances in sprayer technology. The event will also be the first for recent recruits to John Rhodes’ expanding service departments, Richard Cooper and David Frost. ■

Name change is easy to swallow 12R32B

Tel 01778 560466 or 01778 560425 Mob 07767 816555 www.fentonsofbourne.co.uk

John Rhodes and his team are hoping for dry weather on 8th and 9th December for their company’s annual open days – a major event in the crop-spraying calendar. Their business is devoted solely to the sales, servicing and repair of all types of crop-spraying machinery. Historically attracting good interest from suppliers and farmers alike, this year the open days promise to be bigger and better than ever. In a change from recent years, the event will be held at the company’s main depot at Shinehill Farm near Evesham in Worcestershire, where 16ha (40 acres) of stubble will – weather permitting – allow working demonstrations of a wide range of machines from several leading manufacturers. On show will be the front cab Berthoud Raptor, the new Horsch

SALES SERVICE HIRE

Following its sale to the American company Sukup Manufacturing last spring, Dan-Corn is changing its name in the UK to Sukup Europe with effect from 1st November. The Danish-owned grain-handling equipment company has been a partner A Sukup silo. and supplier of Sukup silos, have been no major changes, he equipment and dryers for many says. years. UK Midlands sales manager In April Sukup became the John Statt adds: “The fact that the majority shareholder in Dancompany’s main supplier has now Corn A/S and took ownership become the majority shareholder of its Danish distribution centre gives it stability.” and offices as part of a planned UK eastern counties sales succession. manager Barry Scott adds: “Sukup Managing director Jens Munk Europe has a strategy for the next Jensen says: “We represent Sukup three years. We continue with on the European market and our UK expansion plans and have therefore it’s quite natural that we recently appointed Neil Baker as have a name change.” northern area sales manager to Since the acquisition everything build on our existing areas.” has gone “extremely well” and there

54 www.farmersguide.co.uk December 2015

50-67 ROP Dec.indd 54

14/11/2015 18:22

Everyone’s a winner

Deere to acquire precision drill ﬁrm

Prize-winners at the fourth annual SAA awards dinner.

The fourth annual Suffolk Agricultural Association awards dinner, held at Trinity Park, Ipswich in October celebrated East Anglia’s farming excellence and innovation with the announcement of the winners of the Association’s three farming competitions. Founded in 2010 by the Catchpole family, Stowlangtoft Healthcare – a residential care business – took first place in the prestigious BALE award competition. Throughout its 24 years the BALE award, which celebrates farm diversification through alternative land or building use and is open to all farm businesses across Cambridgeshire, Essex, Norfolk and Suffolk, has been sponsored by Ashton KCJ solicitors. Another care business – Three Arches Care – took the best newcomer award. Second place went to R & P Barker Farms for its Woolpit-based business that combines rearing traditional-breed cattle and Jacob sheep with a butchers’ at Elmswell. Hirsty’s Family Fun Park near Great Yarmouth and Wellies-On care farm near Colchester won certificates of merit for Richard Hirst and Monach Farms respectively. Bunn Fertiliser sponsored the Suffolk Farm Business Competition, which recognises the best farms in Suffolk and was judged this year by farmers from Berkshire against criteria including business management, business sustainability, land occupation and community involvement. Fletcher & Dunt of Charsfield took the FW Barker perpetual challenge cup and tankard in the farms up to 250 hectares (625 acres) class, while top honours in the farms of 251—500ha (625—1,250 acres) went to A & RL Porch of Middlewood Green, Stowmarket, who were presented with the Cranworth perpetual challenge cup and tankard. The King George VI Memorial

challenge cup and tankard for farms larger than 501 ha (1,250 acres) went to John Brown & Sons of Horsecroft, Bury St Edmunds – the fourth time this farm has won the competition in the past five years and an “amazing” achievement,

say the organisers, given that the judges are different every year. The farm also won the special award for best crop for its vining peas. The Suffolk Farming School of the Year title went to Bawdsey CEVC Primary School. ■

John Deere says it intends to buy Monosem, the European market leader in precision drills, including its four facilities in France and two in the US. In a statement issued in early November it says the move will help it continue to build on its leadership position in precision agriculture. It says that Monosem is admired for its innovation and success in precision drilling technology. Deere doesn’t intend to change the independent nature of Monosem – the brand will retain its trade mark. Monosem has been a familyowned enterprise through three generations since it was founded in 1948.

Agronomy & Engineering

V Form

Micro Wing

HD HZ rolls

Don’t miss Cousins’ annual Open Days: Dec 1st & 2nd nDiscuss your cultivation requirements nEx-demo & Used machines for sale nSpecial Open Days Offers* nExciting new products nRefreshments

Folding Patriot combination cultivator

*Best terms before the end of December

COUSINS of Emneth Ltd, PE14 8DE sales@cousinsofemneth.co.uk Tel. 01945 584600 visit our website: www.cousinsofemneth.co.uk

December 2015 www.farmersguide.co.uk 55

50-67 ROP Dec.indd 55

16/11/2015 18:00

Apprentices are a class apart

Dealer relishes new challenge

This year’s intake of Claas apprentices at Reaseheath – representing: Claas Southern; Claas Western; Manns & Kirby; Marsh; Morris Corfield; A T Oliver & Sons; Rickerby; Riverlea; and Sharnford Tractors – with representatives from Claas UK.

This academic year sees 24 new students from Claas dealerships throughout the UK and Ireland join the company’s agricultural apprenticeship scheme. Eighteen will receive training at Reaseheath College in Cheshire, while the remaining six – from the north of England, Scotland and Ireland will study at SRUC Barony, Scotland. Most of the students are working towards achieving the extended diploma in land-based technology. This high-level vocational

qualification is designed to meet the Government’s calling for training programmes that meet employers’ needs. Five, however, are training for the new parts (sales and marketing) apprenticeship – also based at Reaseheath – launched last year by Claas to bring the next generation of young, knowledgeable and experienced parts personnel into the industry. Over the course of their three-year apprenticeships, all the participants will be continuously

assessed for their competence and skills, using both work-based evidence and e-portfolios. They will also spend time training at Claas UK headquarters at Saxham in Suffolk, and may be selected to visit the Claas Group headquarters in Harsewinkel, Germany. In a final, fourth, year, the technician apprentices will have additional advanced technical and industry training so that, by the time they qualify, they’ll be eligible for LTA 2 status. ■

Branson Tractors chose November’s Institute of Groundsmanship’s Saltex event at the NEC, Birmingham to launch its tractors into the UK. The company was founded in the US in 1998 as a tractor distribution company, with South Korean Kakje Machinery, which has been in business since 1968, as its parent company. Its first dealer appointment is Fentons of Bourne – one of the UK’s foremost dealers in tractors and ground-care machinery. In its 28 years, Fentons of Bourne, which covers south Lincolnshire and north Cambridgeshire, says it has earned “an enviable reputation that others can only hope to emulate.” Director Glen Bellamy says: “This is an exciting opportunity for our company. We pride ourselves on our reliability and the quality of our service.” Branson Tractors, which has tractors in the 24—80hp range, “ticks all the boxes” and complements the dealer’s existing franchises, he adds.

Monitoring material GT Bunning is adding a simple weight indicator for its marketleading range of Lowlander spreaders. The GT 400 allows the operator to monitor the total amount of material spread by pressing the start/stop button after every load. The system is integrated with

the same type of load cells as used on the popular and proven RDS Apollo psi indicator. To further reduce the cost of having a weigh-cell system on smaller spreaders, Bunning and RDS/Digistar have developed a drawbar-mounted load cell for machines with a 6—10t capacity.

GT Bunning’s GT 400 weight indicator.

Prices for the three load-cell system with the GT 400 indicator start at £3,885.

Glen Bellamy with wife Helen on the Branson Tractors’ stand at Saltex.

Russell Millar Ltd manual or electric

Celebrating

40 YEARS in the shutter industry

Phone for quote:

01353 725151

CMY

• We offer a made-to-measure solution to secure workshops and grain stores • Steel roller shutters can be operated by hand chain or electric using 3 phase or single phase motors • Standard finish is galvanised with colour options of Plastisol or Powder Coating • Access doors built into the shutter or positioned in the existing walls are also available • Shutters can be made up to 8m wide with wind anchors standard over 4.5m • With 40 years experience in the roller shutter industry call us for a competitive price over the phone anytime

12R14B

for farm buildings

STEEL ROLLER SHUTTER DOORS

21 Townsend, Soham, Ely, Cambs CB7 5DD • Fax 01353 723266

56 www.farmersguide.co.uk December 2015

50-67 ROP Dec.indd 56

14/11/2015 18:33

W J m

The Fieldbird

The Albatros

Scan for further information

PKE-Power Harrow

Visit your local RABE dealer OR Tel: 01778 423787 tele ex hlaf ad copy.pdf

S T R E N G T H

A N D

14/10/2015

www.gregoire-besson.co.uk

09:59

P E R F O R M A N C E

T O

GR EGOIR E- BES S ON

GR OU P

L A S T

TELE-HANDLERS & EXCAVATORS Packages available. Loading & shipping service available

W LO

S UR O H

CMY

We currently have a large quantity of late model JCB & Manitou Tele-handlers available, & late model Caterpillar, Kubota, & Bobcat Excavators.

50-67 ROP Dec.indd 57

FOR YOUR PARTS FAST

CALL THE PARTS HOTLINE

OR VISIT OUR WEBSITE

12/11/2015 12:40

A N EW C ON S E P T

Septic tank not meeting the required standard for discharge? Existing soakaway failed or a method needed to raise effluent to a new high level soakaway? Blocked soakaway, drains backing up, obnoxious smells? A sewage plant needed but with minimal disruption?

The Allerton CON SEPT is the answer! The C O N S E P T from Allerton will save you time and money by converting your existing septic tank or cesspit into a fully functioning sewage treatment plant. High grade composite materials and non ferrous fixings ensure a long and trouble free life. Talk to us and we will help you find the correct solution to ensure you are properly treated!

Freephone: 0800 328 5492

Specialists in Sewage and Effluent Treatment Systems

Head Office: Woodbridge Rd, Sleaford, Lincs Tel: 01529 305757 E-Mail: sales@allertonuk.com www.allertonuk.com

Bucks branch opening Oliver Agriculture Ltd (Claas) and Oliver Landpower Ltd (JCB) have celebrated the opening of a new purpose-built branch at Tingewick, Buckinghamshire to replace the Bicester depot, which the business had outgrown. The new premises, at 11,500sq ft, is three times the size of the previous unit and provides extra space to display, stock, service and repair machinery from the many quality franchises represented. “The business has grown considerably in recent years,” explained branch manager Ian Morton, “and the move allows us to continue to grow while ensuring we provide the high standards of after-sales service that have contributed so much to our success over the years. The new workshop is superb; fully equipped to suit all our products and with the addition of a 3.5t gantry crane to easily handle the heaviest components from modern farm equipment.” The company has been operating from the new branch since the summer, but an open day on 4th November provided an opportunity for customers to inspect the new facilities and to meet all the staff. Along with the two main franchises

of Claas and JCB, Oliver Agriculture was supported by Horsch; Great Plains; Opico; Maschio; Richard Western; Martin Lishman; Dalbo and KRM. Oliver Landpower was supported by Cherry Products; Amazone; Sumo; Larrington; McConnel and Kawasaki. Both Oliver businesses will operate from the new branch, and manufacturers’ representatives were present at the open day to provide information and advice to visitors. More than 300 customers attended, and were impressed with the new facilities, which include a spacious showroom displaying farm and country clothing as well as safety and non-safety footwear for men and women.

Dealers Oliver Agriculture Ltd and Oliver Landpower Ltd have opened a new branch in Buckinghamshire. Inset; Youngster Dylan Coates, is pictured trying out a Claas combine for size at the recently-held open day.

BEDEC

ACRYLIC BARN PAINT THE SAFE ALTERNATIVE TO TAR VARNISH, BITUMEN AND CREOSOTE EASY TO APPLY EXCELLENT COLOUR RETENTION MULTI-SURFACE APPLICATION FLEXIBLE - NO CRACKING OR FLAKING LONG LASTING FINISH

Ideal for workshops sheds, garages etc. One can does it all!

01473 327596 or email: enquiries@collins-skiphire.co.uk

12R04B

12R29B

AVAILABLE NATIONWIDE THROUGH TRAVIS PERKINS, ERNEST DOE & SONS LTD, RIDGEONS, BREWER & SONS & DULUX DECORATOR CENTRES

58 www.farmersguide.co.uk December 2015

50-67 ROP Dec.indd 58

16/11/2015 16:06

Nematicide application vital in four-in-one planting A potato planting rig with four components able to operate simultaneously gives great flexibility and control over when the crop is planted. But, with the intense pressure of supervising those four operations, the operator needs each component to be well built and easy to use. That’s the case at RJ and AE Godfrey’s Eastoft Grange Farm near Scunthorpe in Lincolnshire, where the 140 hectares (350 acres) of maincrop varieties can be planted in just 12 days using a Grimme GL430 4-row cup planter attached to a Grimme GR360 rotary cultivator working to a depth of 20cm, with a Horstine TMAir nematicide applicator and an Amistar AS120 applicator. While the company’s 600ha (1,500 acres) of arable land are host to predominantly combinable crops, potatoes are grown on rented ground. Farm manager Will Gagg says: “We rent good-quality silt land from local farmers and aim to select land that hasn’t produced potatoes for seven or eight years – or even longer if it’s available. “I think the six-year interval most growers seem to be happy with isn’t long enough to avoid disease and pest problems.” Planting is a three-person operation with one on the planter and two working 12-hour shifts on a 3.8m Basilier with six subsoiler legs that runs in front of the planter. It’s a high-output operation that means Will can plant at the optimum timing without compromising planting quality. He says: “We used to run a similar planting rig at Holbeach in Lincolnshire which was pulled by a John Deere 8520 crawler. It was designed and built by Grimme and is similar to one that we saw working in Germany when we visited the factory in Damme. “It’s a complicated but very costeffective and efficient set-up, but means the operator has to be on the ball at all times.” The cup planter is ideal for maintaining planting accuracy even at speeds of up to 7kph, while the rotary cultivator ensures that nematicide applied by the TMAir is fully incorporated into the bed, he says. “The one disadvantage is that we can’t use this system on stony ground, which means all the land has to be de-stoned in front of the planter.” Nematicide application receives particular attention, as it’s one of

the key operations that can have the greatest impact on yield and on the environment. The product of choice is Nemathorin although, by fitting special cartridges to the TMAir, it’s also possible to apply Vydate. In either case, Will maintains that following strict stewardship protocol is a prerequisite of growing quality potatoes for the pre-pack and freebuy markets. The TMAir applicator is attached to an adapted frame to the side of the planter and in front of the rotary cultivator. It is calibrated by RWL Services of Framlingham, Suffolk and benefits from Wizard technology for electronic metering, working from the land speed of the tractor.

Everything is controlled from the cab, meaning that there’s no need for a land wheel. Nematicide is blown in front of the cultivator via eight fishtail outlets set about 25cm off the ground. “The outlets benefit from individual metering, making the system so much more accurate than others that rely on a single metering unit for all the outlets,” says Will. He says it’s important for the operator to have good visibility from the cab which is why the TMAir is positioned to the side of the planter. Two weather-sealed translucent plastic hoppers allow the driver to check nematicide levels while on the move.

TMAir also benefits from Surefill closed transfer receivers, which are fitted as standard.

p Eastoft Grange Farm’s potato planting rig. t Will Gagg.

FACTORY OPEN DAYS YOU ARE INVITED TO THE SUMO FACTORY OPEN DAYS 2nd & 3rd Dec 2015 10am - 4pm Melbourne, York, YO42 4RG

JOIN US AT THE FACTORY FOR…. - New product launches - Meet the Sumo team and our technical experts and engineers - Exclusive factory tour featuring our robot welders, lasers and press brake in action - Working demonstrations* - FREE hog roast and refreshments

TO BOOK YOUR PLACE CALL 01759 319900 OR EMAIL R ACHAEL @SUMO1.COM BOOK WWW.SUMO1.COM

*subject to weather conditions

December 2015 www.farmersguide.co.uk 59

50-67 ROP Dec.indd 59

17/11/2015 10:58

Minimal impact on soil produces optimum results a reputation for potato-friendliness. It offers extra cleaning without directional change, thanks to its cross roller set. Hydraulic drive allows it to be set to the prevailing conditions. This machine is also available with the renowned Varioweb pintle belt/ axial roller set combination. On the Ceres 400 planting machine, a new option is an antierosion system. Hydraulic shovels move up and down to create small clumps of soil between the ridges which prevent the runoff of not only water and soil, but also fertiliser and chemicals.

A number of extra features on AVR’s potato harvesting machines were revealed at BP2015 in November. The Puma 3 4-row self-propelled harvester is described as “the pick of the litter”. Thanks to the tyre pressure optimisation system, its impact on soil is minimal, whether the hopper is empty or full. Coupled with the machine’s lightweight construction, this produces optimum results. Those who opt for Varioweb, AVR’s flexible cleaning module, are ready to deal with any harvesting conditions. Within its class of trailed offset bunker harvesters, the Spirit 9200 has

Given its limited weight, it can be used in planter/ridging hood and even built-in cultivator combinations. Meanwhile, the GE-Force folding cultivator was developed to boost capacity. It can be used for 6m fullfield planting bed preparation or 8-row inter-row rotary cultivators. AVR’s 6-tine system generates extra capacity or limits fuel consumption. By installing extra hooks on the rotor, more capacity is generated with the same fuel consumption. Finally AVR’s CTHV storage loader is capable of handling the large volumes necessary for swift and safe

The GE-Force folding cultivator.

storage, thanks to its deep rubber V-shaped belt and a double drive that prevents belt slipping at all times. Line Control for the AVR receiving hoppers has been revamped to link all the elements of the storage line for a ■ phased start-up.

Eastern dealer broadens brands Thurlow Nunn Standen is announcing the inclusion of Valtra to its brand portfolio. The mainline Agco dealership in the east of England will now offer the full range of Agco brands, also including Massey Ferguson, Fendt and Challenger. Initially the dealership will offer the Valtra brand primarily from its Sculthorpe branch in Norfolk, before extending it further across its branch network.

Managing director James Thurlow says: “This is a natural progression for the business. This is an exciting time for the company and we look forward to building strong working relationships with Valtra customers in Norfolk.” Two experienced Valtra technicians are joining TNS to provide a high level of professional service and are a welcome addition to the Sculthorpe and Attleborough teams.

Sales manager Richie Hannant says: “The addition of the Valtra brand brings added strength to our Sculthorpe team. We’re looking forward to developing the brand (L to r) Martin Morris, service manager at Sculthorpe; within our area. “With two experienced Simon Eckersley, Valtra technician at Sculthorpe; and Richie Hannant, TNS sales manager. Valtra technicians joining the team, we’re confident we will care for the new brand expected of provide the high level of customer us with all Agco products.”

Talk to the specialists who understand your wearing parts needs... CAMBRIDGE ROLL PARTS High quality iron and ductile Cambridge Roll rings to suit most makes. Ex-stock for 50,60 & 65mm axles, can be machined for 70mm.

DISC HARROW SPARES PRESS RING PARTS Extensive range of resilient boron Durable cast iron rings in stock: sizes steel disc blades 18"-36" (450and weights for most makes & models. Axles & bearings in stock or 915mm). For round or square shafts, plain or ‘notched’ style. made for your machine.

Call Will Robinson today on

01673 857 619 Fax 01673 858 856 info@agricast.net

Browse our entire range and get more details on our new website: www.agricast.net

Suffolk Industrial Doors

Ltd.

• roller shutters • sliding doors • steel security doors • high speed doors • folding shutters • PVC curtains Based in Suffolk

12R07B

We specialise in the supply, installation and repair of all types of industrial and agricultural doors including

t: 01449 768112 m: 07557 956001 www.suffolkindustrialdoors.co.uk

e: info@suffolkindustrialdoors.co.uk

60 www.farmersguide.co.uk December 2015

50-67 ROP Dec.indd 60

14/11/2015 18:35

OPTUM CVX THE OPTIMUM FARMING SOLUTION +3@0% 1 G N I D TSTAN WITH OU AIL FINANCE* RET

The New Optum CVX with 300 rated horsepower offers: • Exciting new compact design with Continuously Variable Transmission • Excellent power to weight ratio and outstanding versatility • Advanced Farming System - AccuGuide, Headland Management Control II and ISOBUS III • Efficient and proven technology *Ts & Cs apply. Business purposes only. This is not a contractual offer and is subject to changes in prices, supply terms, law or interest rates and may be withdrawn at the discretion of CNH Industrial Capital. Finance is subject to status (credit approval).

www.caseih.com

50-67 ROP Dec.indd 61

10/11/2015 16:01

Call Olly on 07786

246837 or 01284 811509

ANAEROBIC DIGESTION SERVICES

We offer custom harvesting solutions for the Renewable Energy & Livestock Sectors in the Eastern Counties We offer the complete service for all crop types running modern high output machinery

Digestate Solutions • 24m booms • haulage services • 80m

nurse tank

Maize • Full Harvesting Service • Energy & Forage Maize • Drilling at 20 or 30" rows

Clamping • New 434 Shovel or AgBag

Wholecrop • Direct Cutting with Wholecrop Header

Based in Bury St Edmunds www.ojneilcontracting.co.uk

12R46B

3 Offer the complete range of wood log boilers 3 Two complete ranges Angus Super and Angus Orligno 200 3 Output range 18kW, 25kW, 40kW, 60kW, 80kW, 96kW and 130kW 3 Products fully MCS certified 3 Grants available under Renewable Heat Incentive 3 92% Heat Efficiency 3 Significantly reduce heating costs 3 Incorporate into existing heating system

www.ecoangus.co.uk 01934 862642 62 www.farmersguide.co.uk December 2015

50-67 ROP Dec.indd 62

16/11/2015 09:51

Renewable Energy

Clean energy is feeling the heat Energy Now Expo continues to be the only renewable energy event exclusively for the agricultural and rural sectors, say organisers.

Given the recent headlines on renewable energy subsidy cuts by the Conservative government a lot of UK farmers are unsurprisingly unsettled. But it’s not all doom and gloom; the renewable energy industry is now mature, and much more able to become self-sufficient, according to experts. The Energy Now Expo, taking place on the 10th and 11th February 2016, is an event for farmers and landowners to find out exactly what options are available to them, offering a chance to hear from industry experts speaking in

multi-stream panel debates, and there are some excellent businesses offering secure schemes that stand up in their own right. NFU chief renewable energy and climate change adviser, Jonathan Scurlock will be speaking in the Energy Now Expo multi-streamed conference, and says the current government is seemingly flexing its muscles with this ‘energy policy reset’. “Clean energy is in the firing line. Beginning with the Conservative manifesto commitment to limit the growth of wind power, then

hitting solar with cuts to the feed in tariff scheme, the list of revisions to government policy on green measures just goes on growing, and these changes are naturally disconcerting for farmers. But I’m positive that this is not all negative for the industry. “The maturing renewable energy sector offers a lot, circumventing the basic need for government incentives,” he says. According to Mr Scurlock, many farmers have already concluded that diversifying their agricultural businesses with clean energy production is a sensible way of supporting profitable farming and enhancing Britain’s food security in a volatile world, “and there are some convincing pitches from renewable energy companies to farmers, wanting to benefit financially from renewables. The options are growing, as the sector evolves, for instance, farmers not in a position to borrow money may be able to opt into a competitively priced power purchase

agreement, where they can expect to pay around seven or eight pence per unit, offering long term savings,” he says. “Opportunities in solar will be more competitively priced next year, and even though the margins are tightening for installers and developers, there are still attractive deals. Mr Scurlock is positive that in the absence of strong political opposition, the way forward must be to engage with ‘pro-business advocates’ that champion the green economy and the greening role of small–medium sized enterprises. “The private sector should lead the transition to a low-carbon economy,” he adds. “The event has developed a number of new features to ensure visitors can access the most upto-date, innovative opportunities available in the renewable energy sector, and there are plenty to choose from,” according to Energy Now Expo director, David Jacobmeyer. To register for the event, free of charge visit www.energynowexpo. co.uk. Or for more information, call 01293 854 405. ■

Wine venue provides case study An events and wine-tasting venue in the Bristol area is reaping the benefits of replacing its expensive, inefficient oil boilers with a log gasification boiler. Aldwick Court Farm & Vineyard needed an environmentally-friendly solution to provide heating and hot water to its site, including farmhouse, visitor centre, function rooms, offices and flat. It chose an Eco Angus Super log gasification boiler, 10,000-litre Akvaterm accumulator tank and Nova stainless-steel flue.

The boiler’s 130kW heat output and large loading capacity means it’s capable of burning logs up to 100cm long with 15—20 per cent moisture content. It works at 91 per cent efficiency and can burn for up to 12 hours continuously. Such a high efficiency means a single weekly load provides enough hot water in summer. Apart from its environmental credentials, the installation is proving to be financially rewarding, being compliant with the NonDomestic Renewable Heat Incentive.

Reduce your energy consumption, save money and lower your carbon footprint with the

The venue will receive payments of 8.8p per kWh of heat generated over 20 years – a total of about £403,900. It will also make fuel cost savings of £258,636, giving a gain of about £662,500 additional income over the 20-year scheme. The initial outlay paid off in just over a year, while the carbon footprint will be reduced by 36t of CO2 per year – a 90 per cent reduction. Aldwick Court Farm’s Eco Angus Super boiler.

• Biomass • Air Source Heat Pumps • Ground Source Heat Pumps • Solar Photovoltaics (PV) • Air Conditioning

• Solar Thermal • Energy Monitoring • LED Lighting • Digital Electric Heating • Electric vehicle charging points

Step to a Greener Future

Contact Julien Meakin on 01473 559070 or email: info@energyadvisoryhub.co.uk December 2015 www.farmersguide.co.uk 63

50-67 ROP Dec.indd 63

14/11/2015 18:38

AB SYSTEMS (UK) LTD T: M: E: W:

01363 82677 07836 647199 david@agbag.co.uk www.agbag.co.uk

The flexible, efficient, sealed storage system for: GRASS, MAIZE, WHOLECROP, CRIMPED GRAIN, SUGAR BEET, BREWERS GRAINS & PRESSED PULP

 Keeps valuable nutrients for longer  Less than 2% losses  AgBags available in 3m & 3.5m diameters – in lengths up to 150m.  Suitable for AD biomass storage

64 www.farmersguide.co.uk December 2015

50-67 ROP Dec.indd 64

16/11/2015 16:12

Renewable Energy

Eyes on the AD prize Farm equipment manufacturer Fliegl is looking to capture a slice of the UK’s growing renewable energy market. The family-run company, which recently opened a new factory in Lincolnshire, has identified biogas and biomass production as key areas of interest. Commercial director for the UK, Jose Viedma says he expects the sector to be worth £3million over the next few years. “We know it’s competitive but we think we’ll be able to make

inroads,” he says. Known for its push-off trailers and agricultural machinery, Fliegl has been involved in the renewable sector in its native Germany and other parts of Europe for a number of years – providing feed-in systems for AD plants, woodchip dryers and attachments for the storage, transportation and handling of substrate. Jose says: “We’ve installed more than 1,100 AD plant feeder systems in Europe and, so far, a dozen in the UK. So we’re confident that our

quality and technology is second to none.” Among the company’s products is the Fliegl Biomat, a stationary feed-in system for AD plants, as well as a portable feed-in system that can take raw materials straight from source, removing an unnecessary stage of unloading. It also has a range of attachments to handle substrates including long grass and hay bales and those with high manure content. “All our products are designed

Fliegl’s stationary AD feed-in system.

to be as efficient as possible – saving energy and costs,” Jose concludes.

■

Energy savings on farm Whether considering electricity generation, or reviewing lighting or heating efficiencies, Energy Advisory Hub offers free advice on all the technologies available and produces bespoke energy-saving plans. Electricity, oil, gas and LPG certainly won’t be any cheaper in years to come, but new technologies offer a way forward, it says. Modern advances such as LED lighting and the use of biomass,

air-source heat pumps, solar photovoltaic (PV) systems and digital electrical heating can significantly lower the running costs of homes, farms and business premises, says the company. Its energy monitoring service offers bespoke solutions inclusive of in-depth reports and suggested energy savings. It can recommend suitable lightcontrol solutions and explain the

potential savings. One of its most popular energysaving options is LED lighting. Again, it can specify the savings to be made from reduced maintenance and running costs. Improving heating methods is “another great way” to reduce energy consumption. Its free consultations will determine the most beneficial technologies for any given situation. It can also provide

Cost per linear metre, quality, finish and design are the best I have found - I only wish this system had been available sooner in the UK.” Agri-Gen Ltd

performance reports and quotations for any project. The Ipswich, Suffolk-based company says that its objectives are to reduce its customers’ energy consumption, saving them money and reducing their carbon footprints. It claims to have gained a reputation for its professionalism and attention to detail and, having traded for 25 years, says “it knows a thing or two” about customer service.

CBS Agri Walls offer the perfect solution for storing raw materials. CBS Concrete Products have been successfully supplying Biogas plants and livestock/dairy farmers throughout Europe. Our unique design removes the need for expensive earthwork preparation. Call Ben Chalk on 0808 189 1258 to discuss your requirements.

CBS AGRI WALLS FIND OUT MORE ONLINE AT

www.cbs-concreteproducts.co.uk Call Ben Chalk on Freephone 0808 189 1258 or email b.chalk@cbs-concreteproducts.co.uk

50-67 ROP Dec.indd 65

14/11/2015 19:29

Renewable Energy

Fob makes light work Since the introduction of a portable unmanned weighbridge with fob-activated tare weights for tractor/trailer combinations, silageharvesting contractors and biogas plant operators have been busy using this system to its maximum potential. The existing Griffith Elder system comprised beams and ramps, armoured cables, a traffic light and indicator housed in a waterproof case with printer and built-in power supply. The fobs that activate the system are solidly constructed and supplied on a lanyard. The most attractive features of this system are its speed of operation, portability and ease of use – all important when trying to keep cycle times from field to clamp to a minimum. This is especially

true when relying on contractors to cut and cart, who may be using extra drivers who could need to be called upon at short notice. The 2015-built machines offer 4.2m-long beams that aid the weighing of a tractor in one bite, and a tri-axle trailer in a second bite. Together with a USB memory stick, this small improvement enhances the performance of the system, making it very valuable for this type of work. Further developments for 2016 will be: new Quick Lock waterproof plugs; a new-generation fob that has refined operating features and extended battery life; and combination traffic light with large display and fob reader that provides enhanced visuals, but with the simplicity of a single cable.

The build options for Griffith Elder’s 2016 fob-activated weighbridges.

Handler ﬂeet essential for farm efﬁciency

A Manitou MLT741-120 has been selected to perform materials handling for a brand new food waste-based AD plant on the outskirts of London.

Farming over 1,000ha (2,500 acres), within a few miles of the M25 near Enfield, London, and with additional enterprises including a brand new AD plant due to commence operation shortly, D Williams & Co is relying on a fleet of three Manitou telehandlers to make sure materials can be handled efficiently when and where needed. Farmers Guide machinery editor David Williams visited the farm. The Williams family has been farming at Cattlegate Farm since 1928. Brian, Howard and Adrian Williams are the third generation of the family to be running the operation. The farm is all arable, with a traditional crop rotation but the site, close to the M25 and major transport links, has provided opportunities for diversification. A transport and storage business has been developed as well as herb production. Mint and horseradish are produced for supermarkets. A green waste composting operation takes in 25,000t of green waste per year generating much-needed compost to be spread on the heavy land clay soils and there is a brand new purpose -built anaerobic digester, capable of converting 27,000t of food waste per year into over 1.25MW of electrical power. “We are just 13 miles from Piccadilly Circus,” explained Adrian, “and there are many pubs, restaurants, schools and supermarkets between

The MLT741 will be working up to 1,600 hours per year with a variety of attachments.

us and the centre of London, all with food waste to dispose of. We have installed a processing unit to prepare the food for use in the AD plant, which automatically separates food from its packaging. A variety of food waste is handled, from leftover food from restaurants to untouched, out of date, packaged food unfit for human consumption. The food is pasteurised and then fed into the first digester for 22 days, before being moved to the second digester for another 15 days, while the methane produced is extracted to fuel the electrical generator. The food packaging is compressed into bales for transport efficiency and used as fuel for power stations. Heat produced by the generator won’t be wasted either, with some used to evaporate water from the digestate, reducing the volume to be handled.” Adrian said the digestate produced is separated into slurry and solids, the slurry injected, or spread and then incorporated, on the agricultural land while the digestate is transported from the plant to the fields, where it is stored at the field edges until it is spread and incorporated on the stubbles. “This new enterprise ticks all the right ethical boxes for me, as it uses waste which would otherwise go to landfill to produce much-needed electricity and fertiliser,” he added.

66 www.farmersguide.co.uk December 2015

50-67 ROP Dec.indd 66

16/11/2015 17:13

Pictured with the new handler are; (l-r) Adrian Williams with Ernest Doe Power Fyfield branch and sales manager Michael Bateman. Operators James Hack and Alan Peirce are impressed with the new handler, the third Manitou in use on the farm. “The crab steer function will be useful when we are operating alongside concrete walls in the plant,” said Alan.

“The traveling distances are as short as possible, due to our location within the M25 and, because we will be processing the food waste as soon as it enters the plant and before it begins to decompose, odours are negated by the very high-tech filter system. We are also creating extra employment in the area as at least five full-time staff will be needed for the operation. I wouldn’t have felt the same about a plant which required me to grow maize rather than food on all my land, but this enterprise fits perfectly with the rest of our businesses.” Key to the operating efficiently of the new enterprise is the ability to efficiently handle the delivered food waste as soon as it arrives. “We looked very carefully at our options, but a farm telehandler seemed the obvious choice,” explained Adrian. “We already run two on the farm, which means that a spare machine would always be available if needed, plus no other type of loader is as versatile. We have been using Manitou handlers on the farm for almost 20 years, and as soon as we started considering other options for the plant, we realised there was no point, as we wouldn’t have the confidence we have in our current brand. It provides everything that is important to us. Another benefit of having three similar machines is that attachments are interchangeable, and it is easier and safer when employees need to help out in other areas when we are busy or short-staffed, which occasionally happens. “Of course, having operated the brand for as long as we have on the farm, we have had issues from time to time, but the back-up from the manufacturer and our dealer has been excellent, and problems have been quickly resolved or a replacement machine has been delivered immediately to the farm,” he added. The farm’s main handler is a large MLT840-T137PS Elite model, the fourth successive Manitou owned by the family. For much of the year a second

handler is needed and, this year, an MLT 932 is on hire from local Manitou dealer, Ernest Doe Power. “In theory we could manage with one handler for the farm, but however we try to plan operations, it seems we end up unloading and loading a lorry at the same time, and our sites are up to 20 miles apart. Having the two handlers during busy periods means the business runs more smoothly and it reduces the amount of road work needed between our locations,” Adrian continued. The model selected for the AD plant is an MLT741-T120LSU Powershift Elite, providing 6.9m maximum lift height and up to 4.1t lift capacity. This was selected for its short wheelbase and superb manoeuvrability, which will be essential for loading the bulk waste into the reception hopper.

Fast cycle times Adrian explained that the key requirements were fast cycle times, ease of operation, lift capacity, short wheelbase and good visibility all around. “Its use will be different to that of the farm handlers,” he said, “as it will travel only short distances but its hydraulics will be in continuous use. When it isn’t fitted with its 1.5m3 bucket it could be working with a bucket brush, pallet tines, a box rotator or a skip rotator and we estimate that it will be operating between 1,200–1,600 hours per year, whereas the farm handlers spend more time travelling between work areas, and work 600–800 hours.” Ease of operation is particularly important, as it will have up to five regular operators as well as part-time staff when needed. “We all like the Manitou cab as it is quiet with plenty of space, and visibility is very good with the boom mounted low down, giving a good view to the right of the operator, and our experience of the farm machines has shown us that the ventilation and air conditioning

system will keep the windows clear on cold damp winter days. All the controls fall naturally to hand and the JSM joystick means there is no need to look for the controls as everything is on one lever, including forward and reverse shuttle. We sometimes see new operators with experience of other brands operating the indicator the first time they drive our Manitous, but within 10 minutes they become familiar with the controls.” One of the main operators of the new machine is James Hack and he said that he is impressed with its ease of use and comfort. “The 360 degree visibility is excellent,” he said, “and I find the controls take little time to get used to although I had never operated a Manitou until I started working here a few months ago. The joystick is well designed and being able to operate the boom and change driving direction all without having to take my hand from the lever is a big advantage. I am impressed with this Deutz engine too - it seems very good and is smooth and quiet. The handling and manoeuvrability make the machine ideal for this situation.” The farm’s handlers are typically replaced every five years, although the MLT840, purchased in 2014, took over the role from a 4-year-old MLT732, changed a year earlier than had been planned. “Our machinery replacement policy is quite flexible,” explained Adrian, “and because the handler was used extensively during the early stages of construction of the green waste enterprise, it had worked many more hours than usual and replacing it earlier made sense. The resale value of Manitou handlers is pretty good, and from when we buy a new machine we have a fairly good idea of what the cost will be to update it after five years.” The new MLT741 has been purchased with the benefit of a five year, 6,000 hours service package and warranty, but Adrian explained that he usually likes to see at least three years’ manufacturers’ warranty on his equipment. “We look after the machinery fairly well on the farm, and apart from daily checks, we try to pull the handlers in to the workshop every six weeks or so to give them an extra check over, for our own reassurance really,” he said. “The fluid levels are all easily checked during the daily walk-around and there are clear indicators in the cab which let us know if anything needs attention. All the grease nipples are easy to get at so little time is spent on maintenance.” The local Manitou main dealer Ernest Doe Power, supplied and looks after the farm’s handlers, along with the farm’s main combine; a Case IH Axial Flow and the tractor fleet which

Four-wheel steer and a short wheelbase will provide the manoeuvrability needed for the tight operating areas.

includes a Case IH Quadtrac, several Pumas and a Maxxum. Back-up is excellent, according to Adrian, and there is a good relationship between the farm and dealer staff. Options selected for the AD plant machine were boom-mounted LED lights, and Michelin industrial specification tyres, which are expected to provide a long working life and to reduce steering effort on the concrete. “The LED lights will be ideal for darker mornings and evenings during winter,” added James. “The reception hopper area is well lit anyway, but when we need to operate out in the yard, there will still be plenty of obstacles as well as other people working and the extra lights will be a big help.”

Constant improvement We have seen constant improvement with each new Manitou handler we have purchased, especially in more recent years,” commented Adrian. “The cabs have become more comfortable and wider, and visibility has been improved. Controls are better designed now making them easier to use. Our MLT840, bought last year, was like chalk and cheese when compared with the MLT732 it replaced, and with the upgrade hydraulic pump option we specified, which offers flow on demand, there is a big difference for operators as full flow rates are available with the engine just idling which keeps the noise and dust down and saves fuel. One of the main things is that operators seem to like them. We don’t hear complaints and the machines get looked after reasonably well.” The handler is an important component and we are convinced the Manitou is the best on the market and that this MLT741 will be ideally suited to its role. ■

The new Manitou brings the fleet used on the enterprise up to three machines. Pictured is the farm MLT 840.

December 2015 www.farmersguide.co.uk 67

50-67 ROP Dec.indd 67

16/11/2015 16:55

Scan to watch the TITAN in action

1/2 million YouTube

views

NEW

for 2013

CAPACITY UP TO 11M3

call us:

01872 560592 or visit: www.teagle.co.uk

CAPACITY UP TO 15M3

FEEDING • BEDDING • PROCESSING

EXPERTS IN SLURRY MANAGEMENT

68 www.farmersguide.co.uk December 2015

68-140 ROP Dec.indd 68

12/11/2015 17:06

Muck & Slurry

Making muck spreading more accurate

An increasing interest in improving the contribution of manure to fertiliser programmes is being reflected in spreader design – particularly the shredding and spreading efficiency. And, for those looking to make the maximum use of fertiliser replacement values, some manufacturers offer a GPS link to automatically adjust application rates to match field map data. For example, GPS-regulated spreading is available through the optional Apollo control system on K-Two Sales manure spreaders. The result of a development programme between K-Two, RDS and weighcell specialists. The control system monitors the discharge rate from the spreader at 20-second intervals and adjusts the spread rate accordingly by varying floor speed. Since K-Two began offering the Apollo equipment two years ago, sales have been to those farmers looking to increase manure spreading accuracy, and also to contractors. Here there is increasing demand to be able to base charges on the weight of manure spread, plus the ability to promote a more accurate service to customers. On Richard Western spreaders, automatic ground speed spreading control using GPS technology plus weight measurement and recording has been on the options list for three years. It’s usually specified on machines equipped with the spinning disc and horizontal beater spreader mechanism. This type of spreading unit is available on the Delilah 3000 and FBS series manure spreaders and is designed to produce an improved shredding action with an even spread pattern. Application accuracy is particularly important for materials with a high level of plant nutrients such as poultry litter which can otherwise cause yield variation in the following crop. Spreading with horizontal beaters and spinning discs is employed mainly for relatively low application rates and a wide spread pattern. For materials such as yard manure, most of Richard Western’s customers prefer the vertical beater mechanism. A GPS link plus weigh-cell equipment for spread control can also be supplied as an option on spreaders available from Agri-Hire. Probably better known for hire

services covering manure spreaders and other equipment, Agri-Hire also sells a wide range of machinery. It manufactures manure spreaders for use in its own hire fleet and for sale. Retail sales of manure spreaders are of these new machines, as well as reconditioned spreaders from the hire fleet. Agri-Hire spreaders include the VB range with vertical beater spreading designed chiefly for straw-based manures, in 10—20t load capacities. The standard specification includes tandem axles on the larger models, while the options include a sprung drawbar and – unusually – a choice of paint colours. In the horizontal beater range with spinning disc spreading, capacities are up to 18t. Standard specification includes automatic lubrication, drawbar suspension and a slurry door. When engineers at Teagle Machinery were developing the Titan range of spreaders, results from field tests both measuring the shredding performance of the spreading mechanism and assessing spread patterns helped produce the final design. The five Titan models start with the popular 6 and 8m3 farm spreaders. The medium-capacity version holds 9m3 while, at 10 and 12m3, the top-of-therange models cater for contractors and large-scale livestock units.

The Titan 9 is the mid-range model in the Teagle manure spreader range.

All Titans can be equipped with a sprung drawbar and the options also include special paddles that can be fitted for spreading light materials such as poultry litter. Norfolk-based GT Bunning can probably claim the distinction of offering the biggest UK-built manure spreader. Its Lowlander Widebody 380HD model equipped with triple axles holds 40t of manure. Not surprisingly, most of the customers are from overseas. For UK contractors and farms with a large livestock enterprise, the Bunning range includes the Lowlander 175HD

Mk2 with 22m3 heaped load capacity – equivalent to about 17.5t. The specification includes a hydraulic drive to the moving floor. Hydraulic brakes and an access ladder are also standard equipment. There’s a choice of vertical beater spreading action or horizontal beaters with spinning discs that have adjustable blades to alter the spread pattern. Shelbourne Reynolds started making manure spreaders in 1992, having bought the production rights to the Econ range. Econ had been a pioneer of the impeller-type side-spreading mechanism that has a number of advantages, including efficient spreading and the ability to handle a wide range of solid and semi-solid manures. Now Shelbourne Reynolds has improved and extended the original Econ range under the Powerspread name.

The Pro 2300 is the top selling model in the Shelbourne Reynolds Powerspread range.

There are six sizes of Powerspreads in the 7,250—14,500 litre range. Four Pro series models are aimed mainly at contractors and larger farms, offering the extra versatility to handle light materials such as compost and poultry litter. The top seller is the Pro series 2300 holding 10,500 litres. The options list for the larger two, top-of-the-range, Pro series Powerspreads includes a sprung tandem axle equipped with rear-wheel steering. ■

Positively better pumping Positive displacement (PD) pumps have been in use for many years in many industries – including agriculture. Historically, however, the tractormounted PTO-driven pumps haven’t been suited to umbilical systems. But now Vogelsang UK has designed a system that works off the tractor hydraulics with a solenoid control system, that adjusts pressure relief to the specification of the pump, up to 14 bar. With a lower horsepower requirement and ability to pump greater distances than centrifugal pumps, the Vogelsang PD lobe pump can now make economic sense to the end user. 12R37B

Livestock manures and other by-products such as local authority compost and residues from anaerobic digestion can be a valuable source of plant nutrients. But to achieve the best results, efficient spreading is essential, writes Mike Williams.

Vogelsang’s positive displacement pump.

The company will have available for demonstration early in 2016 the 3-point linkage-frame pump, capable of displacing 200m3 per hour.

JAMES P DIXON LTD Suppliers of all types of muck delivered across East Anglia Extra muck always required

01359 258034 07823 555210 December 2015 www.farmersguide.co.uk 69

68-140 ROP Dec.indd 69

16/11/2015 10:52

Powerspread Pro

6 models from 1600 to 3200 Gallons Powerspread Dairy • 1600 and 2000 gallon models • Simple and reliable • Spreads solids and liquids

Powerspread Pro SWB • 1800 and 2300 gallon models • Hydraulic drop down rotor • Reverse drive

Powerspread Pro LWB • 2400 and 3200 gallon models • Single and tandem axle • High capacity, fast discharge

Scan to view it in action on

MR UK 92x130 Aut 15.qxp_Layout 1 14/09/2015 15:28 Page 1

Call us for full details: 01359 250415 Visit us at www.shelbourne.com Performance without compromise For your nearest dealer please contact us on: +353 59 972 1929 For Northern England & Scotland: Gordon Brodie - 07799 905130

12R25B

CMY

• Horizontal Beater Option • Air Brakes Std. • Large Sprung Leaf Drawbar *+ delivery + VAT • T & Cs apply

70 www.farmersguide.co.uk December 2015

68-140 ROP Dec.indd 70

11/11/2015 15:54

Muck & Slurry

Sides the way for all materials When it bought the Powerspread manure spreader range from Econ in the early 1990s, Shelbourne Reynolds chose to specialise in the sidedischarge format. Ever since then it’s been evolving the machines to improve their performance in all materials. The Powerspread range is longrenowned for its excellent spread pattern, the company states. This, it says, can be attributed to the design of the overshot rotor and mid-tub door position. However, recent developments have also improved performance in drier, more solid materials. The current range covers six hopper sizes and a “multitude” of specification combinations. In production for 10 years, the

basic-spec Powerspread Dairy range is offered in 1,600 and 2,000 gallon sizes. It’s intended principally for spreading liquid and semi-solid material, although an optional anti-bridging arm can be fitted for fresher higherdry-matter material. The specification then jumps significantly with the Powerspread Pro, available in short and long wheelbase formats. The Pro incorporates a 30 per cent larger discharge door and rotor, steeper sides, an uprated drive and a hydraulic drop-down rotor for easy stone removal. These additional features significantly improve performance in drier, more solid muck and compost, while maintaining the machine’s performance in liquid material. The hydraulic anti-bridging arm is

The top-of-the-range Powerspread 3200.

The new buffer zone Slurry-handling specialist Storth is launching a range of mobile nurse tanks to support umbilical slurry and digestate spreading where fields are a distance from the farm or biogas plant. The use of nurse tanks has seen a recent resurgence in popularity. Sited in, or near, the fields involved, they act as a buffer for the umbilical system. Topped up by lorry or tanker, they allow spreading to carry on uninterrupted. A special feature on Storth’s nurse tanks are hydraulic-lifting stub axles on either side. These give a level floor base from front to back of the tank, allowing the efficient internal flow and discharge of slurry/digestate as the tank nears empty. This avoids the internal pipework linking front to rear necessary with standard axles – a potential bottleneck given the thick, sticky nature of digestate in

capacities. The long wheelbase machine is also available with a tandem steering axle for faster and smoother road travel. ■

standard on the Pro. The short wheelbase Pro is available in 1,800 and 2,300 gallon sizes, while the long wheelbase version has 2,400 or 3,200 gallon

Extensive range of machinery on offer

The smaller, 65m3, Storth mobile nurse tank.

particular. Storth’s nurse tanks are fully enclosed with a roof, preventing unwanted or accidental access that could lead to personal injury. The tanks come as standard in 65m3 and 100m3 sizes, retailing at £30,000+VAT and £36,750+VAT respectively. However, tanks can also be custom-made to suit individual preferences, for example for colour, port position and compressor type.

Over the 14 years since it was founded, independent family-run Chippenham Farm Sales has earned a name for its unrivalled selection of new machinery. And, with everything from yard scrapers to rear-discharge muck spreaders in stock this winter, its reputation should only be enhanced. Boasting machinery from more than 80 leading agencies, the company’s selection is extensive. And, with plenty of used machines also on offer, there’s something for every need and budget. Managing director Malcolm

Robinson is delighted with Chippenham Farm Sales’ growth. He says: “We’ve worked hard to give our customers the biggest choice when it comes to a new purchase. “Offering value for money and the ability to compare products is really important. “We have years of farming experience, too, so we know our stuff. And our customers like the fact that we can give them unbiased advice on a huge range of agricultural and forestry machinery.” Based in Wiltshire, the company delivers nationwide.

Chippenham Farm Sales’ team offers a first-class service.

PROVEN IN THE FIELD

OUR DELILAH JUST GOT BIGGER! Key features of the new 2000 series Delilah spreaders include: • Bigger diameter spreading rotors for improved spreading performance • Bigger Tapered body – 1.5m front and 1.6m wide rear for better flow of material • Bigger and Wider loading area for reducing spillage • Bigger range of models from 7.5 – 15 tonnes Richard Western Ltd D’Urbans, Framlingham, Suffolk IP13 9RP

T: 01728 723224

www.richard-western.co.uk

December 2015 www.farmersguide.co.uk 71

68-140 ROP Dec.indd 71

14/11/2015 19:35

14214 KTwo MuckS HPL FC aw only _Layout 1 15/10/2014 12:08 Page 1

Designed To Perform Built To Last Using only the most exacting materials and build standards, the K Two Sales range of muck spreaders use commercial axles and brakes as standard and the product life is extended with controlled shot blasting and finishing with 130 micron of two-pack marine specification paint.

trailers

muck spreaders

aerators

Fowlers Field Farm, Station Road, Aylesbury, Buckinghamshire, HP17 8DD Tel: +44(0)1844 299 290 Fax: +44(0)1844 299 390 Email: paul@ktwosales.co.uk

www.ktwosales.co.uk

F S

ARM

HIPPENHAM

ALES LTD

Tel: 01249 651059 • 07973 915229 • 07817 842128

Albutt shear grabs & auger buckets Browns log splitters & saw benches SPECIAL OFFER Conor tankers - Low prices JPM & McCauley dump trailers - From £6750 Marshall rotary & rear discharge muckspreaders - Fantastic deals Maschio 3m power harrows c/w packer roller - From £6500 MCM livestock trailers, with or without sheep decks - Low prices

The proven, safe way to spread a little... or a lot Strautmann feeder wagons SPECIAL OFFER Strimech 9ft buckrake c/w hardox tines - £3950 Teagle Tomahawk feeder/bedders - Full range in stock Watson rollers, massive selection in stock - Low prices USED Bateson 20ft tractor drawn livestock trailer. Year 2012 - £6250 USED Strautmann 1450 Vertimix, year 2010 complete with front cross conveyor and 1m extension - £11000 Just a small selection of machinery in stock - See website for full stock list!

• • •

Tried and tested Roto Rainer range Mono progressive cavity pumpsets Specially adapted irrigation booms

visit www.briggsirrigation.co.uk or call Adrian Colwill

01536 260338

CHIPPENHAMFARMSALES.COM 72 www.farmersguide.co.uk December 2015

68-140 ROP Dec.indd 72

12/11/2015 17:04

Muck & Slurry

All muck and magic Farmers can now aim to apply organic manures with a degree of accuracy, record-keeping and attention to detail comparable to that of artificial fertilisers, thanks to the latest generation of control software from Bergmann. With the ability to spread at widths of more than 30m, organic manures can be applied from tramlines, meaning that crops can be top-dressed and that manures can be incorporated within controlled-traffic regimes. Bergmann’s system has a fullcolour touch-screen with simple symbols and hot keys which allows many machine functions

and application parameters to be automatically controlled with ease. Isobus compatibility means machines can use existing GPS data sources from the tractor for variablerate application and mapping. Accurate weigh cells ensure both the active on-the-move calibration of the application rate and also the validity of the recorded data. Application data including field and customer records along with product databases are stored within the system. A CCI terminal allows control for those without full Isobus terminals in the tractor. This allows access to a range of after-market apps such as

Precision application of organic manures is possible with touch-screen control from Bergmann’s new system (inset).

road navigation and the control of other machinery such as balers and seed drills. The system is compatible with

leading precision agriculture office software which ensures that agronomic nutrient planning and regulatory requirements are fulfilled.

All sorts of spreaders Rolland’s mid-range Rollforce 6118 (foreground).

Rolltwin range has three different beater frame options. And for larger farms, contractors and the hire market, the company’s new Rollforce range would be the preferred option. It has five different

The French company Rolland says it offers a spreader for every job and is already looking forward to Lamma 2016 to showcase its latest development. For hilly areas, the 6—10t compact

lengths and three different side-height options. It can be specified in a twin vertical beater frame of 2.1 or 2.5m height, or with Rolland’s TCE spinning deck, capable of spreading up to 30m with certain products. The Rollforce range can be fitted with Rollcontrol Isocan RDS weigh system for continuous weighing and a touch-screen box that automatically adjusts the speed of the bed in line with forward speed. This is the DPA system that will be shown at Lamma.

For the very largest operations, the 17—35m3 Rollmax models come in twin- or triple-axle versions with various axle configurations and hydraulic suspension. Twin vertical or TCE spinning deck spreading are offered, alongside the most advanced Rollcontrol system. A family company based near Brest in Brittany, Rolland has operated in the UK since the 1980s. All its machines for the UK arrive by ferry via Plymouth for distribution by its dealer network.

Particular attention has been paid to the beater driveline, which has multiple bearing supports for the front-to-rear drive shaft. In 6—24m3 capacities, Apollo spreaders offer a choice of horizontal or vertical beater attachments. Andrew is delighted with the performance of the Unia products that he’s imported. “I’d been looking for a manufacturer of high-quality, low-cost spreading machines and Unia Group has exceeded my expectations.”

The Unia Apollo 14 with the horizontal beater option.

Consolidation with Polish partner An East Yorkshire farm machinery importer is further consolidating its partnership with Polish manufacturing giant Unia by launching its Apollo manure spreader in the UK. Market Weighton-based Manterra is the sole UK importer for Unia Group, a leading central European manufacturer of agricultural machinery, and the Apollo is the latest addition to the importer’s range. Manterra founder, farmer and agronomist Andrew Manfield says:

ost m e h £ Geftrotm your

• ers eat al b c i t er mv 10 m Ø 1,0

“Unia is one of Europe’s leading suppliers of manure spreaders and has an extensive range of options, all at prices that are unmatched.” Prices start at £19,995. Designed to withstand harsh working conditions, all of the multipurpose spreaders have a high standard specification including: a sprung heavy-duty drawbar; slurry gate; hydraulic variable control of the floor conveyor; large wheels and tyres; and a single-line air brake system.

Tornado3

rpm 445 eed p s n atio Rot

Reversible teeth HB 400 - 12 mm

Removable galvanized inner plate

www.joskin.com Capacities between 11 m3 and 26 m3

Call now +32 43 77 35 45 ukinfo@joskin.com www.joskin.com

3 YEAR

WARRANTY

December 2015 www.farmersguide.co.uk 73

68-140 ROP Dec.indd 73

14/11/2015 19:39

„XTill: spreading technology for advanced users“

Effective: simultaneous tillage and liquid manure incorporation saves time, work and costs, while protecting the environment. Exemplary: no nitrogen losses, no odor formation, improved water retention, protection against erosion and soil compaction. Reliable: parallelogram design ensures precise liquid manure depots. Get in touch with us: xtill.info

e: sion@vogelsang.co.uk m: 07817 986561 t: 01270 216600 12R17B

AGRI-HIRE LTD

Anzeige_XTill_200x150_GB.indd 1

02.12.13 14:54

Dereham Road, Beeston, King’s Lynn PE32 2LE

Serving British Agriculture since 1986

Specialists in the self-drive hire of Muck Spreaders, Vacuum Tankers and Trailers. Over the last twenty eight years they have gained an enviable reputation for supplying quality equipment for hire to farmers, contractors and industrial customers alike and have grown into the United Kingdom’s largest muck spreader hire company. Their Muck spreaders come in both vertical beater and horizontal beater with spinner decks. The combination of these two types of machines ensures that they will spread most materials from strawed manure through to compost, slurries, sludge’s and Limex, with spread widths up to 24 metres. All of these machines are available with load cells and digital read out for those customers who need to know exactly the amount of material that they are applying to any given area. Agri-Hire also have a range of tandem axle spreaders, these are also available in vertical beater and horizontal beater with spinner decks, these machines give greater capacities with a narrower road width and meet the latest braking legislation with varying track widths which means they are perfect for row crop work and will fit tramlines for cereals, their new Magnum range will give capacities up to 40 tonnes, again with spread widths up to 24 metres. All Agri-Hire models are available for hire or sale and can be tailored to meet customer’s specifications. Agri-Hire’s principle aim has always been to build quality machines that are built to last and meet customer’s requirements.

SEPCOM SLURRY & AD DIGESTANT SEPARATOR

GREENCROP SLURRY TANKER

MULTICAM LV DIRTY WATER IRRIGATOR

Vacuum tankers suitable for dirty water, slurry and sludge systems, also dust suppression and injection units are available for hire. They also have a fleet of high speed bulk trailers with a capacity of up to 18 tonnes, which are ideal for transporting all bulk materials. These are available for both sale and hire.

12R11B

For more information on their equipment and services, call Tim for sales on 01473 744088/07712 780056 or James for hire on 01473 744088/07860 849685 www.agrihire.co.uk

GREENCROP SLURRY PUMP & UMBILICAL SYSTEMS

01328 701992 | Mob: 07881 787997 Email: howard@greencrop.co.uk VENERONI MIXERS & PUMPS

www.greencrop.co.uk

74 www.farmersguide.co.uk December 2015

68-140 ROP Dec.indd 74

12/11/2015 10:28

Muck & Slurry

Applicator and reel combined Designed to transport both applicator and hosereel on a single unit, Tramspread has collaborated with Vogelsang to combine a 1,000m Random Wrap reeler with a 12m dribble bar slurry applicator. The applicator is mounted on a heavy-duty three-point linkage and combines a rear mounted male Q-fit A-frame to allow the “backpacking” of the Tramspread reeler. Vogelsang’s 12m dribble bar has a galvanised steel frame and ExaCut distributor with 48 outlets at 40mm, the scope to handle up to 300m3 an hour and the design to cope with ‘foreign bodies’, making the Vogelsang range of dribble bars user friendly. Other benefits to the

Vogelsang range includes stiffer pipe end outlets that can be run on the ground but do not affect the accuracy of placement – all stay equally at 25cm spacing, keeping crop growth even. The Tramspread reeler has a detachable spool which is easily taken off the robust carrying frame by removing two securing pins, lowering it to the ground and moving away. One frame can serve several spools. The spool is rotated by twin hydraulic motors, which allow longer lengths of drag hose to be recovered at any one time. It can comfortably hold up to either 1,000m of 4-in, 1,000m of 5-in, or 800m of 6-in hose, or a mixture of,

The dribble bar with “backpacking” reel and (above) the reel detatched.

when using the easily attached partitions. The new machine will be displayed on Tramspread’s stand (R75) at Lamma. ■

Pumped and ready to go Wox Agri Services has always merited a place in the drag hose business. Now it’s making additions to the bespoke units for pumping, including: internet-based remotecontrol units; fully-electronic engines; and clutches with fully-integrated hydraulic systems for compressors. The pumps themselves are from

Cornell, with “realistic” outputs of 200—325m3/hr, depending on the type of material being pumped and the distance involved. To complement the units, Wox is a stockist for Gollmer & Hummel drag hose in 4, 5 and 6in diameters and in a number of different grades. And, to complete the supply line,

Sales Direct

We also undertake all agricultural engineering, fabricating, machining and welding, including reconditioning and modifications to existing machinery, blasting and paintshop facilities (please phone for best prices). For further information please ring John on 07860 417643 or Chris on 07852 191231 12R47B

Grain bucket

Twin leg mole

Fork mounted crane jib

Access platforms

e: covenbrooksales@gmail.com •

Buck rake

An engine-driven pump unit with internet-based control.

WE OFFER A WIDE RANGE OF QUALITY BUILT PRODUCTS DELIVERED NATIONWIDE DIRECT TO OUR CUSTOMERS

COVENBROOK

Single leg moles

it also supplies a full range of sexless snug-fit couplings, again in 4, 5 and 6in sizes. Finally, it has its own in-housedesigned trailed and mounted reelers, available in 600—2,500m capacities.

Adaptor plates

Grain pusher

Hydraulic bag lifters

Bale spikes

Machine movers

General purpose bucket Covenbrook Hall Farm, Stisted, Braintree, Essex CM77 8AJ

Tine seeder drills

Bag lifter

• www.covenbrookfabrications.co.uk December 2015 www.farmersguide.co.uk 75

Tandem, Tri,Quad Axle and Self Propelled Tankers from 8-32m3 Full system of booms and applicators

Precision Application of Solid and Liquid Manures

Precision Spreaders - Accurate widths of 30m+

0845 6034136 www.continentalsoiltechnology.com - growing together

Spreaders & Slurry Equipment Outstanding performance and quality. Spreaders from 9 - 29 m3.

Biosolids Service to Agriculture

Slurry tankers from 15 - 25 m3, which can be mounted with; drip hose boom from 12 - 30 m, different types of slurry injectors or incorporators.

Have you considered using Biosolids in order to reduce your fertiliser inputs? We take pride in our Product and Service. With large numbers of farmers seeing significant yield increases, they are paying less for their fertiliser and gaining the added bonus of building levels of organic matter. Benefits include

• N, P, S Mg • Soil Conditioning • Potential for Yield Increases • Service includes Soil Indices, Delivery & Spreading • Nutrient Management Planning • Agronomic Advice from FACTS qualified advisors

Read more about our products and find your local dealer at our website.

12R01B

If you would like further information from one of our Farm Sales Advisors, please call 01908 453040, or log onto www.nutri-bio.co.uk for further information and contact details.

Direct info: 01256 381 086 www.samson-agro.com

tel: 01223 542846 www.nutri-bio.co.uk email: nutri-bio@anglianwater.co.uk

NEW ROLLFORCE : THE WORD IS SPREADING…

CHOOSE YOURS ON WWW.REMORQUEROLLAND.COM

Mobile : 0788 150 3731 Fax : 01672 520 675 a.clothier@btopenworld.com

76 www.farmersguide.co.uk December 2015

68-140 ROP Dec.indd 76

13/11/2015 15:46

A precision decision When the time came for one Herefordshire farmer and contractor to replace his two 8t rear-discharge manure spreaders with a single more up-to-date machine, versatility and accurate precision were high on the checklist. Alan Goodwin of Upper Yatton Farm near Leominster wanted a machine that could handle a wide variety of products, with weigh-cellbased precision control of application rates and the latest in GPS-controlled variable-rate application. Having considered several alternatives, and had them

demonstrated on the home farm, Alan opted for the 14t-capacity Bunning Lowlander 120 HBD. He appreciated its build quality, the accuracy of the weigh-cell system with auto and variable-rate control, the spread pattern it achieved and its superior general ability to process manure. He says: “We specified the new RDS iSOCAN Apollo controller so that we could use the additional features such as guidance, auto headland on/ off and overlap control. “It’s working perfectly. We’ve spread lime using Agrii SoilQuest

Muck & Slurry variable-rate plans and we’re extremely pleased with the results.” With poultry litter being a readily available and valuable source of nutrients in his area, Alan is aware of the importance of applying it accurately. “The demonstration with the Bunning proved just how accurate it is, as we were spreading chicken manure on a field with a slope at different forward speeds. The controller did its job perfectly, holding the target rate at the different speeds and degrees of slope,” says Alan, who has so far also top-dressed

chicken manure onto oilseed rape on 24m tramlines, achieving a consistent double overlap. ■

Alan Goodwin with daughter Zara and his new Bunning Lowlander. (Inset) The iSOCAN controller does its job “perfectly” according to Alan.

Bespoke slurry and muck solutions Pichon’s galvanised muck spreaders range from 8–24m3. Their beaters, at 1,035mm diameter, are the largest diameter on the market, giving a more efficient, even distribution pattern. Available with single, tandem or tri-axle, the company’s tankers are also fully galvanised. Even after 20 years’ use, there’ll be no sign

of rust, says Pichon. A range of spreading/injection tools include dribble bars, trailing shoes, tines and disc injectors. Pichon also manufactures an “extremely accurate and easy to use” Flowmeter whereby the quantity of liquid to be applied can be pre-set, with the rear valve adjusting itself automatically

according to forward speed. The Flowmeter also allows records to be kept of the product spread – useful for contractors and a necessity when supplying AD plants. Pichon has spent the past three years developing an increasing number of solutions for AD plants in the UK. ■

Pichon spreaders feature the largestdiameter beaters on the market.

suspension for improved contour following. The hydraulic system not only controls the raising and lowering of the boom, but also folds the boom sections for transport. Working widths up to 30m are available, with drip hoses at 330mm intervals.

The Samson range also includes single- and double-disc injectors in 6–12m widths, featuring anti-drip. And new for the 2016 season is the SD slurry injector, which has been developed specifically for the optimal injection of slurry using disc harrow techniques. ■

Slurry tankers suited for all sizes With slurry tankers holding from 15–35m3 and manure spreaders with 9–29m3 capacities, the Samson range caters for every size of farming and contracting operation. The larger spreaders come with a choice of 12 or 24m spreading equipment. Importer Samagri offers a range

of equipment for the Samson slurry tankers, including the CM incorporator for injecting slurry into arable stubble or cultivated soil. Application rates of 10—70t/ha can be achieved with 6.0 or 7.5m working widths. The Samson SBX drip hose is based on a galvanised boom with pendulum

Comprehensive range of muck spreaders K-Two offers the Duo, Evo and Bio rear discharge muck spreaders with capacities from 6–36t. The four-floor chain system is a key feature on all machines along with six tooth-drive sprockets to minimise chain and sprocket wear, and to give maximum breaking strain

capacities across the bed. Flared body sides are built in to all spreaders and help provide large body volume capacities for all spreader sizes. High specification running gear is also catered for on all spreaders, with full commercial axles featuring 420 x 180mm brake drums.

The versatile Duo and Evo twin vertical beater spreaders now feature the new ‘Z’ style rotor with redesigned bottom auger rotor flights to give an even spread pattern at wider spreading widths. The K-Two stepped rotor flight and single piece rotor gearboxes are other key

features of the twin vertical beater design. The Bio Mk 3 range of horizontal beater spreaders also features the same high standard specification as the Duo and Evo ranges but with the ability to spread materials up to 30m wide at low application rates. ■

TRACTORS U.K. TRIED & TESTED FOR GENERATIONS

12C16B

BASIC, SIMPLE & RELIABLE FROM THE BEST PEDIGREE ■ Drum or oil immersed brakes ■ Roll bar or cab ■ 2wd or 4wd ■ 2 Years' warranty

01258 817372 ■ www.tractorsuk.co.uk December 2015 www.farmersguide.co.uk 77

68-140 ROP Dec.indd 77

17/11/2015 10:59

ABBEY SLURRY TANKERS Full range of applicators available

Fully integrated chassis and tank with zero stress points for a longer working life

Collared dish end for increased strength throughout the vessel

Weight sensing sprung drawbar system reduces stress for smoother easier travel and operator comfort

Patented ‘Double Trap System’ for maximum pump protection and maximum filling.

CALL ABBEY

TODAY

NORTHERN UK: JAMIE BRETT 07879 331 071 SOUTHERN UK: ROSS GIBBON 07557 477 547

ABBEY MACHINERY LTD. CLONALEA,TOOMEVARA, NENAGH, CO.TIPPERARY, IRELAND. TELEPHONE : 00353 67 26677 | FAX : 00353 67 26778 | INFO@ABBEYMACHINERY.COM

WWW.ABBEYMACHINERY.COM

fra

/ Ta n

ssis cha

body

years me

S LURRY TANKERS FROM 600 TO 6 600 GAL.

WARR

PICH

BUILT TO LAST.

k barrel a

MUCK SPREADERS FROM 8 TO 24M 3

CALL ALEX : 07739.650.476 - ap@pichonindustries.com farmers guide 2015-11.indd 1

PICHONINDUSTRIES.co.uk 11/4/2015 5:24:00 PM

Drag Hose Specialists Manufacturers of bespoke pump units and reelers Stockists of pipe and couplings

Call today for more information www.woxagriservices.co.uk 01670 789020 78 www.farmersguide.co.uk December 2015

68-140 ROP Dec.indd 78

11/11/2015 12:24

The inﬂuence of efﬂuent King’s Lynn, Norfolk-based Greencrop, a trading division of Ben Burgess, offers a number of ways to spread waste and dirty water from livestock farms and washing plants. It has a range of PTO-driven and electric manual or fully automatic irrigation pumps feeding static sprinklers or rain guns, Multicam mobile low-volume dirty water irrigators and large-scale hose-reel irrigators for slurry. Application rates can be adjusted in the range 4—30mm/ hr, depending on the system. The electric stator rotor pumps running static rain sprinklers or guns apply 4—10mm/hr, while Multicam mobile low-volume irrigators can normally spread 6—20mm/hr. Greencrop’s dirty water products include: two-door PTOdriven impellor or stator rotor pumps; electric single- and threephase submersible; pump in box , horizontal stator rotor pumps with manual or fully automatic control systems; stand-up sprinklers and sledge-mounted irrigation rain guns; Multicam low-volume dirty water mobile irrigators; and high-

range engine-driven hose-reel irrigators for spreading slurry. The company can offer a full range of pto-driven Blueline K80 umbilical pumps and slurry engine-mounted pump sets fitted with Blueline or Doda slurry pumps. Standard pumps are fitted with throttle controller and standard panel push-button start/stop throttle up/down. Alternatively, buyers can upgrade to a fully automatic radiocontrolled system operated from the spreader tractor with start/ stop and revs up/down, the ability to divert slurry from spreader to return to supply, and to set a target pressure to auto-start and stop the pump from a nurse tank.

A Greencrop slurry pump set with radio control.

Muck & Slurry

A solution for every muck spreading need With five different product ranges, Joskin is able to offer a solution for every muck-spreading need. The ranges are divided into two categories – the narrow-body Siroko and Tornado and the wide-body Ferti-CAP, Ferti-SPACE and FertiSPACE Horizon. Designed for tractors of less than 130hp, the Siroko is a fully-galvanised single-axle spreader with 8–12m3 capacities. With a low centre of gravity and large wheels, stability is said to be excellent. The Tornado3 range comprises 11 models, from a single-axle spreader with 12m3 capacity to a 24m3 double-axle machine. These are built to withstand the more intensive workload associated with 130+hp tractors. Two vertical beaters give a spread width of 7–16m depending on the product and working conditions. The 9–12m3-capacity, 8—12m spread width Ferti-CAP is the smallest model in the wide-body range. Like the Siroko, it is fully

The Joskin Ferti-SPACE.

galvanised and built for sub 130hp tractors. With beaters that are easy to remove, it can double as a transport trailer. For the hardest workloads, the strong 12–25m3 Ferti-SPACE spreaders are capable of spreading from 8–16m, thanks to the large diameter of their vertical beaters. The Ferti-SPACE Horizon is Joskin’s universal spreader, handling cattle and poultry manures, compost and organic wastes, for example. Based on the Ferti-SPACE body, it’s fitted with two horizontal beaters and a spinning deck. With volumes up to 25m3, it can spread evenly with low flows on large widths. ■

3 Year Warranty | Details available upon request

Lowlander ® Manure Spreaders Twin Vertical Auger

G. T. Bunning & Sons Ltd Smithy House The Green Gressenhall Dereham, Norfolk NR20 4DT Tel: +44 (0)1362 860352

www.gtbunning.co.uk

TVA | 6 – 40 tonnes

Horizontal Beater & Spinning Disc HBD | 10.5 – 40 tonnes

bunning spreaders

December 2015 www.farmersguide.co.uk 79

68-140 ROP Dec.indd 79

14/11/2015 19:53

Muck & Slurry

Polyester is the latest fashion The Bauer Group is expanding its portfolio of waste handling and spreading systems with the acquisition of Silage & GulleTechnik (SGT), a company that has made a name for itself primarily with the innovative slurry loading system and large-capacity tank for the Claas Xerion, which converts the powerful tractor into a selfpropelled slurry spreader. With the integration of SGT into the Eckart slurry tanker production site in Germany, Bauer will be able to meet rising demand for high-performance self-propelled slurry and AD digestate applicators. The Bauer Group’s product line already includes everything from the famous original hosecoupling system to slurry mixers, pumps and separators – plus the largest trailed tankers using polyester tank designs for reduced weight without loss of durability. It’s this material that is being used for a new tank to fit the Claas Xerion Saddle Trac. It weighs 1,800kg less than the steel tank made for the previous forward-

Larger but lighter tanks are becoming available for load-carrying tractors such as the Xerion 4000 Saddle Trac.

control Xerion yet, at 16m3, it holds an extra 2m3 of slurry. A new direct-mounting arrangement for the pump unit is available as an alternative to mounting it on the three-point linkage – a big advantage, since it weighs 900kg less. The new assembly also improves forward visibility and can handle faster flow rates as there are only four bends in the pipe-work for slurry to negotiate, instead of eight. The assembly is available with a 10 or 12in remote docking system for filling, a 10in stonetrap box and a 9,000 or 12,000 litre/min pump. The larger capacity option is offered for 24–36m slurry dribble booms.

Muck and slurry on contractor’s menu Although umbilical slurry spreading was originally intended to make use of tractors at slacker times of year, it is now a significant operation for one Bedfordshire contractor. Henry Saunders Agricultural Services now does about 300—400 hours’ pumping per year for dairy and pig farmers across Bedfordshire and the surrounding counties. Based at the family 120 hectare (300 acre) College Farm, Oakley, the firm was established by Henry in 2008, offering mainly hedge-cutting and cereal-drilling services. Brother Charlie joined in 2009 and the services have expanded to include stubble-to-stubble cereal operations, round bale silage and hay making, and muck and umbilical slurry spreading. Nowadays typically the business combines about 640ha (1,600 acres) and drills more than 800ha (2,000 acres) each year. As it continues to grow, it’s keen to tailor services to suit farmers and landowners alike. Umbilical slurry spreading is done

Henry (right) and Charlie Saunders.

with a 12m Tramspread dribble bar with flow meters and tractors that have auto-steer accuracy. Henry Saunders can apply slurry to cereal crops, splitting 24m tramlines to minimise wheelings. Average pumping rates are 100,000 litres per hour. An Agri-Hire 16t vertical-beater spreader, complete with slurry door, has been purchased recently to complement the liquid slurry spreading. The contractor will mainly operate the new machine itself, but will also be offering it for hire at a daily rate to help justify its cost. ■

The new Hydro Trike for 2016 Available as a spreader, injector and much more...

J Riley Beet Harvesters (UK) Ltd Church Farm,

Attlebridge, www.jrileyagri.co.uk Tel: 01603 262526 Norwich NR9 5ST trikehalfdec15.indd 1

80 www.farmersguide.co.uk December 2015

68-140 ROP Dec.indd 80

09/11/2015 17:11:13

14/11/2015 19:54

BAUER Polyester Tankers 10,500 – 12,500 – 14,000 – 15,500 – 18,500 Litres Tandem Axle 24,000 Litres Tridem Axle

www.bauer-at.com

The optimal solution for your bedding problems.

Your advantages: • Low Ground Pressure • Minimum Compaction • High Capacity Pumps • Heavy Duty Galvanised Chassis • Strong Non Corrosive Tank • Wide range of Distribution Systems Most Efficient and Cost Effective

Submersible mixers with enormous stirring performance and high efficiency

Contact: Adrian Tindall UK & Ireland Sales Manager 07708 919597 a.tindall@bauer-at.com

Bedding material in cubicles

Magnum CSPH enormous efficiency, suitable for various applications and long lifespan

www.fan-separator.de

Please contact: Adrian Tindall Mobile: + 44 7708 919597 E-mail: a.tindall@fan-separator.de

12R30B

Designed to perform, Built to last.

Redrock Slurry Solutions 07748 140502 | hsaundersagservices.co.uk

Contract and Share Farming

Vacuum Tankers

Slurry Pumps

Trailing shoes

R Large range of slurry tankers from 1100 gal to 3500 gal R High output pumps for mixing ease and speed. Pumping from 3000G/min to 4750G/min R Can be made to suit 7.5M Ag Quip Trailing shoe systems

Call! 028 37552390 www.redrockmachinery.com

Combining Ploughing Cultivations Drilling Spraying Fertiliser Spreading

Umbilical Slurry Spreading Muck Spreading / Hire Muck Handling Round Baling Silage / Haymaking Hedgecutting

College Farm, Oakley, Bedford saunders.agricul@btinternet.com @HSaundersAg December 2015 www.farmersguide.co.uk 81

68-140 ROP Dec.indd 81

12/11/2015 16:56

A W Rusling

C631

Agricultural Contractor

AGRICULTURAL MACHINERY & PLANT SPECIALISTS

Agricultural Contracting and o

COPPICING with tree shear & grab DITCHING & POND creation/renovation TRACKS/SITE CLEARANCE & preparation

New Holland c/w front linkage & PTO, RTK guidance, wide tyres & a set of row crops

CONTRACT WOOD CHIPPING

14 years experience in... • land preparation • hedgecutting • cultivating • harvesting • trailer work Competitive rates Seasoned firewood for sale

Call Andy

Land Management

360 EXCAVATOR HIRE:

C545

MAN WITH HIS OWN TRACTOR

Collins Farming Ltd

B.J. & C. CARBERRY HAULAGE

C670

07768 435505

Phone: 01359 252212 Fax: 01359 252220

to G30/G50 specs Contact Mark on

07850 988808 01728 660271

HIAB HIRE

Email: carberryhaulage@gmail.com

www.bjandc-carberryhaulage.co.uk

North Suffolk

JAMES P DIXON LTD

C669

Bulk Haulage & Machinery Haulage

C629

Manure and compost spreading Large spinning discs with accurate spread widths up to 30m Automatic rate control through on board weigh cells Variable rate and treatment maps GPS steering and LGP tyres Ditch cleaning to remove silt build up and self-set growth

loading services available please call for a quote

Circular sawing from trees to hedges with a 360o excavator

07823 555210 Suffolk

Contact James Sapsed 07590 850 388 • 01223 207203 • www.dasapsed.com

RICHARD TAYLOR t: 01462 442409 • m: 07734 328994 el

C661

• All Grass Work Undertaken for Hay or Haylage • Conventional Baling, Big Baling & Round Baling • Fertiliser Spreading • Everything Equine

• Mole Ploughing • Tractor & Operator Hire • Forklift & Operator Hire • Trailer & Operator Hire • Whole Farm Contracts • Shared Farm Contracts

• All Machinery required for Stubble to Stubble Contracts • Direct Drilling • Straw Harrowing • Lime Spreading • Muck Spreading

Pu Stra rc w ha Sa se les s

Agricultural Contractors & Coach Hire for all Occasions

Farmers,

Trav

e: rtaylor2004@tiscali.co.uk St Ibbs Farmhouse St Ippolyts Hitchin Hertfordshire SG4 7NL

www.richardtaylortravel.co.uk C645

82 www.farmersguide.co.uk December 2015

68-140 ROP Dec.indd 82

17/11/2015 09:46

Agricultural Contractors

AGRICULTURAL SERVICES across East Anglia including… • Field & Margin Management • Spraying 24m/36m/42m • Heavy Cultivations/Rape Drilling • Cereal & Sugar Beet Drilling • Sugar Beet & Cereal Harvesting • Tractor & Operator Hire • LimeX & Lime Spreading • Field Vegetable drilling and bed forming • Straw & Polythene Laying • Muck & Compost Spreading • Share Farming

C645

01366 501199

• Whole Farm Contracts • Land Drainage using a Tractor Mounted, PROFESSIONAL Drain Jetter • Digger & Driver Hire • Straw Purchasing/Baling (Hesston bales) Chasing Service Available • Pest & Vermin Control • For soil sampling and liming advice contact 0870 2402314 quoting Glover Agricultural Services

www.gloveragriculture.co.uk

Hill House Farm, Bath Road, West Dereham, King's Lynn, Norfolk PE33 9TP

C666

Hugh Pearl Land Drainage

C572

with over 60 years experience of contracting can supply all your drainage and trenching requirements from design to construction

New Farm, Bobbingworth, Ongar, Essex CM5 0DJ

Agri Services

C581

C Newman

FARM TRACK RECLAMATION We can recycle your track or driveway back to its original condition using a Meri Road Crusher

Based in Essex

To discuss your requirements further please call Maldon 01245 381366/Mob 07779 258785 Email: cnewmanagriservices@hotmail.co.uk also available contract ploughing • tractor hire with driver

Nurseries, Landscaping, Forestry and Fencing Contractors Complete management of ELS, HLS and Countryside Stewardship Schemes Full Planting and Maintenance of Hedging and Woodland Specialist in the installation of Stock, Equine and Post & Rail Fencing

Fencing Supplies: Posts, Wire, Gates etc Woodland and Hedgerow Supplies Plants, Guards, Canes and Shelters etc

Hugh Pearl (Land Drainage) Ltd

Keepsafe Post & Rail Tornado Bordered Corners Stallion Paddocks Lunge Rings Water Troughs Gates

Mark Vigrass Ltd

01277 890274 Fax: 01277 890322

Contact: Mark Vigrass, Louth, Lincolnshire Tel: 01507-604201 Fax: 01507-610501 Mobile 07971-190345 www.markvigrass.co.uk

www.hughpearl.co.uk

John H. Howlett T. G. ASKEW Brundish Road, Wilby, Eye, Suffolk IP21 5LR

Agricultural Contractor

■ Full farm contracts ■ 24m spraying & 24m fertiliser spreading ■ Muck, Limex 45 & 70 and lime spreading ■ Set aside topping ■ Combining and all cultivations

www.tgaskew.co.uk

C542

Andrew Mobile 01986 785411 07860 262196 Hill Farm, Wissett, Halesworth

Bulk Haulage • Aggregate • Road Planings Stock Feed • Railway Sleepers • Crossing Timbers For further information please contact Timothy Askew Tel: 01379 388156 • Fax: 01379 388109 Email: tim@tgaskew.co.uk C639 December 2015 www.farmersguide.co.uk 83

68-140 ROP Dec.indd 83

17/11/2015 09:46

J. C. Contracts

ION

• C T E S O L I & S P METAL • S N I B N COR • SCRA

OLIT M E D r ings fo d l i u B arm pes of F

• S E ANCE R R O A E T L S C E T VAGE • SI T GRAIN

All Ty

N A • SAL D E T N E R U C D N CO • RE MOVAL •

LAND DRAIN JETTING

500m of hose and electronic tracking devices to track blocked/damaged pipes mini digger available for digging out and repairing pipes Norfolk • Cambridgeshire • Lincolnshire

Contact Paul on 07786 913159

Specialist Agricultural Spraying Contractor

FOR ALL YOUR SPRAYING REQUIREMENTS Philip Clarke 01728 688360 or 07850 710996 C484

FENCING BALING 80x70cm BALING 120x90cm BALE WRAPPING MOWING TEDDING RAKING MUCKSPREADING

Please ring with any other requirements

6 6 68 3

E FARM A SERVICES F

Warwickshire & bordering counties

PWMay May CONTRACTING

Agricultural & Equestrian Contractors

C513

Tel Mobile

01279 423214 07733 103431

www.pwmaycontracting.co.uk

Hedgecutting & flail mowing Muckspreading with 16t vertical beater or 22t twin disc Slug pelleting All aspects of arable & grassland work Fencing

Spraying and liquid fertiliser application Range of machines from 3.5 metres–24 metres Full TopCon GPS guidance GPS soil sampling & nutrient mapping

C628

LAND DRAINAGE D. E. KEEBLE SPECIALISTS Agricultural Contractors

Suppliers of the finest hay & straw: Big Hesston, Mini Hesston & Conventional Bales Baling, Stacking & Delivery Service

• 360° digger hire • Available for Combine Harvester work

Contact:

Straw Spreading for Winter Carrot Cover Muck & Sludge Spreading

CLARKS

Hedge Cutting / Flail & Saw

Tel: Melton Mowbray 01664 474667 or 07850 176922

C532

J R Green

C481

Tel: (Snape) 01728 688688 Mobile: 07889 642096

email: lindakeeble@btconnect.com

www.dekeeble.co.uk

C612

Agricultural Contractors Bedfordshire

☎07415 387696 24 Metre GPS Guided Spraying 24 Metre GPS Fertiliser Spreading Cultivations & Tine Drilling Combining Grassland Work

www.jrgreenagriculture.com

Kirman Agricultural Services Ltd Call Andrew on 07703 730650

01469 569 631

To discuss the above please contact

ED FELLOWES 07976 668314

07771 706077

with long reach Also • Ditching Lakes and farm roads

Suspension Fertiliser & Avadex application available now

or e-mail: Plunkettsb@aol.com

Mobile:

covering Lincolnshire/Cambridgeshire

Contract Services Ltd

C596

PJR

01379 855005

Email: jrcally@aol.com

www.kirmanagricultural.co.uk

Office:

C658

experts in your field

S RE

O • ASBEST

land drainjetting 400m hose

C636

84 www.farmersguide.co.uk December 2015

68-140 ROP Dec.indd 84

17/11/2015 09:47

Agricultural Contractors

Les Cotton Contractors Ltd Complete Drainage Solutions

For a free site visit and quotation for all your ditching and drainage

LES 07831 191525 DARREN 07736 369787 Elms Farm, Wells Corner, Laxfied, Suffolk IP13 8EG

Tel: 01986 798 888 Fax: 01986 798 889 accounts@lescottoncontractors.co.uk

C668

k spreaders c/w 4 Bunnings 15t muc eigh cell w loading shovel with

C647

MATT REDMAN Crop Protection Specialists Covering Bedfordshire and the Surrounding Areas

o 360 Digger, Loading Shovel & Tractor Hire with operator

akley Ltd O J & M

360o digger work specialising in ditching & coppicing (shear & grab) hedge cutting general farm contracting relief drivers & general farm work

agricultural contractor

Mark Oakley

01462 892253 • 07711 376287

Essex/Suffolk border

Tim Moxon

PHILIP BAUMBER

C663

Agricultural Contractors Ltd

Agricultural Contractor DIGESTATE & SLURRY MANAGEMENT

Tramspread Contracting Ltd POULTRY LITTER DELIVERED using high speed trailers c/w fitted sheets

POULTRY LITTER, COMPOST & FYM SPREADING

using variable rate GPS spinning disc spreaders c/w weigh cells capable of up to 30m spread width

POULTRY LITTER WANTED

07850 942480 • 01527 592778 tmoxonagri@hotmail.co.uk

C646

Contact

Philip 01787 281955/07961 967415 Peter 07944 272762

Call Matt on 07845 667331 www.mattredmanag.co.uk

Specialising in umbilical slurry & digestate spreading

For high quality results and prompt service

Scopwick, Lincolnshire 01526 322654 and 07976 550635

Sugar Beet Drilling Combi Drilling Muck Spreader Hire New Bunning Mk4 180 24m Spraying Set-aside Topping General Farm Contracting

C445

& Straw g • Hay Ring All Types of Fencin

Spraying 24/30/32m 24m LGP Avadex Fertiliser Application Ploughing Cultivations Hedge Cutting Flail Mowing JD 750a Drilling Tine Drilling Contract/Share Farming

P Bowers

High capacity solids handling pumps Spring top dressing applications in tramlines 24m dribble bars or 24m nozzle spread applicators Autoguide tractors with flow meters for full application information Slurry nutrient testing Get the best from your slurry application Call Lawrence, Terry or Edwin on 01449 766133

www.tramspread.co.uk

C614

December 2015 www.farmersguide.co.uk 85

68-140 ROP Dec.indd 85

17/11/2015 09:48

MOULTON YARD SCRAPER YS4H

Heavy push pull swing over action yard scraper, for use on 3 point linkage with category 1 & 2 linkage pins, the head stock is designed to accept a standard tractor A frame. The swing over latch is released by means of a rope, which can be operated from the tractor seat.

ed is an k lv or ga l w lly tee Fu s

Specification: Scraping width adjustable from approx 1650mm to 2280 mm Replaceable 50mm thick rubber blade 420mm deep Delivered weight 240kg

Smisby Road, Ashby de la Zouch, Leicestershire LE65 2UE

www.moultonfarmmachinery.co.uk Phone 01530 567040 Trade enquiries welcome Fax 01530 412512

We can keep you going At Fieldens we have the knowledge, the manufacturing capabilities and stock to keep your machinery going. TRACTION TYRES FLOTATION TYRES NARROW TYRES STANDARD TYRES SPECIAL WHEELS

It’s all quite normal for us

M 12R19B

Farmers Guide 25 years ago A preview of the Royal Smithfield Show was one of the main features in Farmers Guide for December 1990. Other major topics included the latest green issues and meeting the environmental challenge especially with straw and slurry handling. On the tractor front Renault, which had recently closed its UK base at Bury St Edmunds, announced the launch of the new 4-model range of the Winner tractor at the show. The top-of-therange 130hp Winner F130 Electronic had a £41,500 price tag. The headline on a Belarus advertisement informed readers that ‘The benefits of Belarus are built in – not bolt on’, and they included a long stroke, high torque engine, automatic 4wd engagement, fully adjustable track width and incredible value for money. Anticipated Belarus exhibits at the show included the 110hp 1062 and 90hp 902 4wd tractors and a new slurry tanker. Standen Engineering at Ely, which was the leader in the sugar beet harvester market in 1990, would be introducing the new Spectrum threeand four-row trailed harvesters at Smithfield. Prices for the side elevator model with full electro-hydraulic controls, automatic steering and depth control, a double fold elevator and a holding tank, started at £25,565. The latest version of the Herriau Turbosem precision drill with a single hopper for use with models up to twelve rows wide was being launched at Earls Court and Terry Johnson

The Standen Spectrum sugar beet harvester was launched at the 1990 Royal Smithfield Show.

Ltd of Holbeach would exhibit new extendable dual wheels. An improved cab and poly-tine for the pick-up reel for the Master series combine harvesters were among the improvements to be found on the Deutz-Fahr stand and Lely planned to show a new range of heavy-duty trailed disc harrows with 660mm discs mounted on self-aligning roller bearings. The HSE Control of Substances Hazardous to Health regulations (COSSH) were under the spotlight in the December 1990 edition of Farmers Guide. Improvement notices were being issued on farms where no progress had been made towards the completion of the assessments required under the regulations. Briefly; the Essex NFU chairman urged members to stick to the footpath laws brought in by the recent Rights of Way Act and a Lemken advertisement congratulated John Hill on becoming the UK national reversible ploughing champion. The 1991 agricultural show programme included Lamma (30 –31 January), the Royal Show (1–4 July) and the Smithfield Show (1–4 December).

David Brown Tractor News In December 1967 the David Brown Tractor News informed readers of the formation of a new David Brown company – Dysona Industries Ltd, Wokingham – to manufacture and market microwave ovens. It was explained that the Dysona microwave oven, which used radio waves, could cook a 9lb chicken in 10 minutes or re-heat pre-cooked meals to table-ready in seconds. In December 1968 the Tractor News announced the publication of the DB Dysona microwave

cookbook for farmers’ wives and others who were using these new instant ovens. Dysona MD Christopher Tibbs suggested that the microwave, which cost around £350, was a “super hotter-upper”, being up to thirty times faster than a conventional cooker. The December 1968 edition of the Tractor News also noted that farms in Britain were enjoying a high degree of mechanisation with over 65,000 combine harvesters and one of the world’s highest tractor populations.

Henry Brown’s Vintage Diary 27 December

(Wheels, Tyres and ATVs) Ltd

Starhouse, Onehouse, Stowmarket, Suffolk, IP14 3EL Tel: 01449 675071 Fax: 01449 678282 E: sales@ﬁeldens.co.uk www.ﬁeldens.co.uk

30–31 January 27–28 February

Engine Somerset – North Somerset Vintage Tractor & e at jumbl e engin and Club’s annual vintage tractor 5RE. BS35 Bristol ton, Comp Easter Farm, l Washingpoo Details on www.nvtec-northsomerset.org. r Show. Somerset – Somerset Vintage and Classic Tracto rn. Malve at World r Tracto – ire stersh Worce

86 www.farmersguide.co.uk December 2015

68-140 ROP Dec.indd 86

16/11/2015 16:16

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

Farmers Guide Farmers: To place a free advert •Visit: www.farmads.co.uk •Fax or post: see page 138. Adverts can also be viewed online at www.farmads.co.uk after the 26th November. Deadline for inclusion in the January 2016 issue is 10th December 2015.

www.farmads.co.uk

OLIVERS Reading Horse Pond Road, Cane End, Reading, Berks RG4 9HJ Tel: 01189 723741 John Textor 07774 732671

Full listings available at www.oliveragriculture.co.uk

OLIVERS Luton Wandon End, Luton, Beds LU2 8NY Tel: 01582 727111 William Helliwell 07894 698202

OLIVERS Tingewick Woodmans Yard, Little Tingewick, Bucks MK18 4AG Tel: 01280 848494 Matt Kennedy 07739 788296

CLAAS ROLLANT 350 RF £13,500 2012, rotor reverse, MPS system

CLAAS SCORPION 6030 CP £31,500 2010, 3000hrs, 460/70R24 tyres, air con, boom suspension

CLAAS LEXION 580+ TT £107,500 2009, 10.5m vario header, 1807/ 1421hrs, RH V/knife, LH/RH laser

CLAAS ARION 530 CEBIS £53,275 2013, 50kph, 145hp, 1450hrs, 420/70R28 fronts, 520/70 rears, 3 spools, f/cab susp, f/linkage

CLAAS LEXION 760 TT £174,500 2012, 10.5m vario header, 1018/ 821hrs, LH V/RH V/knife+ lasers

CLAAS QUADRANT 2200 RF £35,000 2009, 2.1m pick up, roller crop press, auto lube, 120x70cm

HORSCH PRONTO 6 DC £34,850 2009, 6m trailed disc drill, 3000L hopper, bout markers, 2 rows cultivation discs, cleated tyre packer

CLAAS AXION 830 £78,750 2014, 50kph, 600hrs, 540/65R30 650/65R42, 4 spools, front/cab suspension, front PTO, front linkage

CLAAS AXION 820 CIS £48,975 2010, 40kph, 232hp, 1550hrs, 540/65R30, 650/65R42, f/cab suspension, f/weights

CLAAS ARION 650 CEBIS 50K £61,775 2014, 50kph, 184hp, 1100hrs, 540/65R28, 650/65R38, f/cab suspension, f/linkage

1995 DEUTZ FAHR 4065 combine 2729hrs .£26,500 2008 CLAAS LINER 2900 swather .................£8,450 2013 CLAAS VOLTO 870 tedder ....................£7,750 2007 CLAAS ARES 616 tractor 2500hrs ......£22,750 1998 COUSINS SIDEWINDER 8m rolls...........£3,250

2014 DOWDESWELL 105MA 5F plough ......£14,500 2014 GREAT PLAINS SLD 300 ex-demo ......£27,950 2008 HAKKI PILKE wood processor...............£6,375 2012 KONGSKILDE DELTA HSF300 ..............£3,785 2011 SULKY 2100L spreader .........................£3,995

Email: luton@oliveragriculture.co.uk

www.oliveragriculture.co.uk

2004 SULKY DPX MAGNUM spreader ...........£1,950 2007 SIMBA 380ST SOLO OSR ...................£12,750 2003 TEAGLE TOMAHAWK feeder/bedder ....£3,250 WAREING 8t trailer .........................................£1,850 WOOTTON artic trailer ....................................£1,775

Buy and sell online – www.farmads.co.uk

OLIVERS

12R09B

Ian Houlgrave Tel: 01507 466352 Mobile: 0780 134 3023 Fax: 01507 462812 Email: ian@ianhoulgrave.com

12C11B

The largest stock of Claas/Cat Challengers in Europe

FOR SALE OR HIRE

Selection of 95E, 85E, 75E, 65E, 55, 45 & 35

December 2015 www.farmads.co.uk 87

farmers_guide_class_december_15.indd 87

18/11/2015 11:01

Forthcoming agricultural sales 12C10B

Cambridge Machinery Sales

On instructions from Claas Western Ltd due to relocation Due to relocation, on instruction from MILL ENGINEERS, On instructions Claas Western Ltd due anfrom auction will be held at:to relocation OLD WALLS, ABLINGTON, BIBURY,

Next Sale: Monday 7th December 2015

OLD WALLS, ABLINGTON, CIRENCESTER, GLOS, GL7BIBURY, 5NXBIBURY, OLD WALLS, ABLINGTON, CIRENCESTER, GLOS, GL7 5NX Major auction sale of Tractors, Material Handlers, CIRENCESTER, GLOS, GL7& Spares 5NX auctionCombine sale of Tractors, Material Handlers, ForageMajor Harvesters, Harvester, Implements

with approximately 500 tractors

On Wednesday 9th from 09.30am On instructions fromDecember, Claas WesternImplements Ltd2015 due to relocation Forage Harvesters, Combine Harvester, & Spares

OLD WALLS, ABLINGTON, BIBURY, Over 400 lots in total

CIRENCESTER, GLOS, GL7 5NX To include combines, tractors, telehandlers, green harvest and tillage equipment a Tractors, wide range of manufacturers Major auction from sale of Material Handlers, - CLAAS, Krone, Richard Western, JCB and many &more. Forage Harvesters, Combine Harvester, Implements Spares To include an excellent range of: John Deere, New Holland, Case, Massey Ferguson, JCB, Claas, Renault, Deutz, International, David Brown, Zetor, Belarus, Universal etc etc Contractors Plant incl: digger loaders, large & mini excavators, telescopic & masted forklifts, skid steers, dumpers, rollers, compressors, cement mixers, buckets & attachments etc etc

Buy and sell online – www.farmads.co.uk

Agricultural Machinery incl: fertiliser spreaders, sprayers, ploughs, rotovators, power harrows, discs, cultivators, disc & drum mowers, mower conditioners, hay tedders, balers, combines etc etc 12no. Tractors to include: Claas, Deutz-Fahr and New Holland 12no. Material Handlers to include: Claas, Claas, JCB andand Merlo Forage 12no. Tractors to include: Deutz-Fahr New Combine Holland & 12no. Harvesters to include: Claas and Massey & Tillage Material Handlers to include: Claas, JCBFerguson and Merlo Grass Combine & Forage Equipmentto toinclude: include: Claas Claas,and Krone, Kverneland, Gaspardo Harvesters Massey FergusonKuhn, Grass & Tillage Trailers & Muck Spreaders to include: Richard Western AW Trailer etc. etc. Trailers Equipment to include: Claas, Krone, Kverneland, Kuhn, Gaspardo Also a large selection of Claas combine and forager spares,etc. pick-up & Muck Spreaders to include: Richard Western AW Trailer etc. headers, spares,and wheels & tyres. Also a large selection ofworkshop Claas combine forager spares, pick-up PLUStonew Parts and to New fit the full range of 12no. Tractors include: Claas, Deutz-Fahr Holland 12no. In allAccessories over 400wheels lotsand headers, workshop spares, & tyres. Material Handlers to include: Claas, JCB and Merlo products. Combine & Forage CLAAS and other manufacturers In all over 400 lots Harvesters to include: Claas and Massey Ferguson Grass & Tillage th Equipment to include: Krone, Kverneland, Kuhn, Wednesday 9 Claas, December 2015 atGaspardo 9:30am Trailers &Wednesday Muck Spreaders to9include: RichardorWestern AW Trailer etc.weeks etc. prior Catalogues available via th cheffins.co.uk from2015 the auctioneers two December at 9:30am Also aCatalogues large selection of combineorand spares,two pick-up available via Claas cheffins.co.uk from forager the auctioneers weeks prior SALES AND VALUATIONS UNDERTAKEN NATIONWIDE headers, workshop spares, wheels & tyres. SALES AND VALUATIONS UNDERTAKEN NATIONWIDE 01223 213777 •Incamb.agric@cheffins.co.uk all over 400 lots

Plus horticultural and grass keeping machinery, engines, tractor & machinery spares etc etc In all approx 3000 lots

FREE INTERNET BIDDING Register at www.i-bidder.com

FOR FURTHER DETAILS SEE OUR ILLUSTRATED CATALOGUE @ www.cheffins.co.uk OR CONTACT OUR AUCTION TEAM ON 01353 777767

01223 213777 • camb.agric@cheffins.co.uk

Wednesday 9

December 2015 at 9:30am

Catalogues available via cheffins.co.uk

FGuide quarter pg2.indd 1 FGuide quarter pg2.indd 1

Forthcoming Machinery Auction

or from the auctioneers two weeks prior

SALES AND VALUATIONS UNDERTAKEN NATIONWIDE

01223 213777 • camb.agric@cheffins.co.uk

12/11/2015 17:34:28 12/11/2015 17:34:28

Chartered Surveyors / Estate Agents / Auctions

FRIDAY 4 DECEMBER 2015 at 10.30am

FGuide quarter pg2.indd 1

GOODLAND BROTHERS Tillworth Bungalow Hawkchurch Axminster Devon EX13 5UB

12/11/2015 17:34:28

Upon The Instructions of Messrs Wrinch and Spencer

AUCTION DISPERSAL SALE

Shotley, Nr Ipswich, Suffolk Tuesday 1st December 2015 at 10.30am Viewing from 8am on day of sale

To include:

On behalf of Goodland Brothers Agricultural Services (Retiring due to ill health)

For Further Information Contact Auction Office 01935 382909 Mark Northcott 07798 645274 or Greg Ridout 07817 517467 www.symondsandsampson.co.uk

12C30B

6 Tractors – Case CVX160 (14), Deutz 6160.4 (14), Kubota M130X (11), David Brown 1210 (78) & 990 (66 & 62) Farm Machinery including – Rolland 18t Silage Trailer (15), Claas Rollant 374RC Round Baler (12), Agri Spread AS55 Lime Spreader (10), Aitchison Slot Seeder (05), Wecan Rotaseeder (11), Krone Easy Cut 280 Mower (09), Lely Rotonde Rake (12), Kverneland 7640 Bale Wrapper (07), Bunning Lowlander Mk4-75 Rear Discharge Spreader (12), Pichon Vacuum Tanker (99), Ifor Williams Livestock Box (06), Grassland, Arable & Livestock Equipment Workshop Tools & Miscellaneous

In excess of 200 lots to include: Harvesters: NH CX6090 24ft (12), Grimme GZ170 onion harvester. 13 Tractors & Loaders: JD 6150R (13), MF 7845 (07), 5445 (04), 3090 (H), 3070 (J), 698 (X), Deutz 130 (06), JCB 530-70 (T), 525 HL (D), 926 (F), 3CX (E), Fiat 88-94 (M). 17 Trailers: Marston 14T, Legg 14T, Western 12T spreader. ECE 8T, Griffiths 6.5T, Western 6T. 75 Implements: Kuhn 4m drill combination (07), Maschio 3m drill combination (11), Accord 6m drill, Lemken Solitaire-9 3m drill, Lemken & Rabe 5f, Besson Combi-Mix, Quivogne discs, Knight & Hardi 24m sprayers, Various 6 & 4m front presses, Opic & Twose rolls, Kongskilde Delta, wide range of cultivators and veg kit. Various wheels and tyres to include rowcrops, duals etc.

Catalogues will be available to download from the website www.clarkeandsimpson.co.uk / 01728 621200 Live online bidding available via

www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 88

19/11/2015 10:19

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138 ALBUTT bale spike, had very little use, c/w JCB brackets. £500+VAT ovno. C Easter Tel: 07970 987242 (Essex)

AIR CONDITIONING

PAPWORTH VEHICLE AIR CONDITIONING

01234 768889

HIREPARTSREPAIRS Over 30 years’ experience

www.mkmagri.com

The ATV & UTV Specialists

Lexion & Dominator We supply the following new parts combine hire CONCAVES RASP BARS BELTS Fabrication & repairs KNIVES CHAINS FINGERS Breaking 100s of machines FILTER KITS

We stock:

NEW HOLLAND HAYLINER 278 conventional baler, working well, did 1500 bales last year, old but still good, any questions please call. T Venni Tel 07557 910246 (Norfolk) F698

charliepapworth@gmail.com

Tel: 01954 267215 Fax: 01954 267593

SPARES & SERVICE

Sun Valley Works • Wood End Marston Moretaine • Bedford • MK43 0NJ

ANAEROBIC DIGESTION

01926 614345

F02-21B

R134A .................................. POA Air conditioning service equipment •leak detectors •vac pumps •recovery machines AIR CONDITIONING PARTS FOR ALL FARM & CONSTRUCTION VEHICLES AT DISCOUNT PRICES We accept all major credit cards

TOMLINSON

and many other wear parts

JMT Engineering (Ladbroke) Ltd

email: jmtengineering@btconnect.com • www.jmtcombinehire.co.uk

HESSTON 4755 baler, 1996, 63,430 bale count, bale ejector & roller chute, best you will ﬁnd. POA. P Hird Tel: 07703 438589 (Cumbria).

12C31B

F02-25B

F01-02B

12C03B

Gator Main Dealer

BOILER PLANT SALE & HIRE

LARGE STOCKS COMPETITIVE PRICES

ce Scheme

Gator Finan

ANCE 0% FI5N 0% retail 1+2

NEW HOLLAND 575 baler, 2008, plus 40 bale stacker, both vgwo. See it in action on www.youtube.com/watch?v=rwsi q03WAEU. £17,750+VAT. P Crudge Tel 07889 328299 (Oxon) F670

ils

eta Phone for d

F00-25A

packaged boiler units to suit the particular requirements of the anaerobic digestion and biogas process Nationwide delivery

SALESSERVICESPARES

ATVs/UTVs

www.thequadcentre.com

01449 736060

GR AVEA T ONAIL OF LI AB FE N LE R E S

Bombardier Traxter 500cc 30hp

£2,599 walk through ATV with rear box, independent suspension, heavy duty construction, 4 wheel drive, disc brakes, walk through seating area

g shoppin onlineal l your for ts r pa POLARIS

www.polaris-parts.co.uk

01280 817350 F02-16B

12 Hillcrest Way, Buckingham Ind Est, Buckingham, Bucks MK18 1HJ

MF/ARCTIC Cat 700 diesel quad, 4wd, auto, c2007, switch 4wd with front diff lock, all works apart from digital dash, tyres 40%, economical, used but straight, photos on request. £1,450 no VAT. PD Biggs Tel: 07789 520025 (Herts).

telehandler, 59 reg, 3900hrs, Powershift, c/w pallet forks.......................................... £22,950

tractor, M reg, c/w front linkage, paint faded, rear wings rusty, but mechanically good ................£8,750

07973 657609 JOHN DEERE 864 belt round baler, 22728 bales, excellent condition, always stored inside. R Stimpson Tel 07798 786158 (Norfolk) F578 MASSEY Ferguson 185 S2 80x90 big baler, 2006, twin axle, autolube, Fieldstar, 75225 bales, serviced annually by Bigbale Co, always stored under cover, in excellent condition. £25,000. A Brown Tel: 07850 936135 (W Mids).

All prices + VAT

Worcester

Buy and sell online www.farmads.co.uk

F02-26B

in stock

Case IH 5150 4wd

www.tomlinsongroundcare.co.uk

Polaris•Arctic Cat• s list Honda spares specia

S SERVICE SPARES TYRE ipment Logic equestrian equ

JCB 536-60 Agri Plus

c/w euro brackets choice .........................................@£750

Buxhall, Stowmarket, Suffolk IP14 3DL

READVERTISED John Deere Gator 855XUV, 2013, road kit, 52kph, unreg, 320hrs, excellent condition, alloy wheels, black & olive, Big Horn tyres, power steering, rubber mats, front & rear screens (no doors), protection bars. £8,500+VAT. MM Whyberd Tel: 07810 855070 (Suffolk).

Polaris NFU 5% discount

1.5m Shear Grabs

utility vehicle, Q reg, 2009, 2220hrs hyd tipping box, 3 cyl diesel with power steering ........................£4,750

KUHN SW7664 Prowrap round & square bale, will wrap quadrant bales, only done 10,000 bales, 2003. £8,000. A Prinold Tel: 07967 145543 (Staffs).

Visit our new website

www.kingsboilerhire.com

01638 712328 Suffolk 01992 451629 Herts/Essex

Kubota RV900

Buy and sell online – www.farmads.co.uk

GROUNDCARE

Please call 01349 867521 or e: sales@mclarentractors.co.uk www.mclarentractors.co.uk Strathpeffer Road, Dingwall, Ross-shire

BALERS & BALE HANDLING CLAAS 3200 Quadrant 2009 tandem axle, immaculate working order, barn stored every night, owner driven, very good reliable baler, no faults, any trail. £30,000 ono. L Arnold Tel: 07771 888624 (W Mids). CLAAS Quadrant 2200 baler, 60,000 bales, very tidy for age, well looked after. £15,000. A Prinold Tel: 07967 145543 (Staffs).

McHALE 998 SQUARE BALE WRAPPER 2010, 34200 bales, 750mm twin dispenser, new style electronic control box. R Stimpson Tel 07798 786158 (Norfolk) F579 MASSEY Ferguson 2160 Big Baler 120x70, 43,400 bales, in great condition. £39,995+VAT. J Furness Tel: 07973 843230 (Glos). NEW Holland BC 5070, 2011, hydraulic chamber pressure, 2m wide pick up, extra long bale chamber. Photos on request. £7,500+VAT. H Hutsby Tel: 07917 130213 (Warks).

SAUL HIRE TRACTORS TRAILERS FORKLIFTS

John Deere Tractors, 100hp to 285hp Bailey Grain, Root, Flat Box Bale Trailers JCB Telescopic Forklifts complete with attachments Lemken Power Harrows, Ploughs, Flat Lift, Flail Mowers, Set-Aside Toppers, Onion & Potato Equipment

Contact: Jonathan Ireland

Carrington depot: 01205 480460 Mobile: 07778 372606 Sutterton depot: 01205 460600 Email: jonathan@irelandsfarmmachinery.co.uk • Boston Lincs

12C39B

December 2015 www.farmads.co.uk 89

farmers_guide_class_december_15.indd 89

20/11/2015 13:35

Tel: 01522 730 681 James Richard All prices +VAT 07764 511257 07860 575155

2012 Bobcat E45 midi excavator, 4588kg, 2156hrs, twin speed tracking, hammer lines, manual quick hitch, 75% tracks, one owner £20,000

LPG Rayburn Ranger cooker/heater, 2 tone brown, regulator & gas bottle, good working order, buyer to collect. £250 ono. JH Seed Tel: 01780 410516 (Lincs).

BUILDINGS & MATERIALS

F08-09B

Unused New Holland E18B mini excavator, 1660kg, expanding tracks, hammer lines, twin speed tracking, blade extensions, c/w 3 new buckets £14,000

F08-12B

Mastercard

(01622) 832666 Mobile: 07939 114023 Hardy Roofing Supplies www.hardyroofing.co.uk

Cleaner Loaders Unused New Holland E18B mini excavator, 1660kg, expanding tracks, hammer lines, twin speed tracking, blade extensions, c/w 3 new bucket £14,000

DUTCH light glass, 142cmx73cm & 2’x 2’. £2/sheet. R Emery Tel: 07973 532989 (Beds).

2014 Wacker Neuson EZ17, 413hrs, 1782kg, expanding tracks, hammer lines, twin speed tracking, manual quick hitch, 4 buckets, one owner £12,750

FOR SALE F08-40B

1997 CTM504 Basic cleaner loader 1998 CTM534 elevator with scrubber

Northants

07813 182054 01536 771246

www.usedcrashbarriers.co.uk

www.richardbetts4x4.co.uk

BEET EQUIPMENT AGRIFAC ZA2000 sugar beet harvester, 2001 model in good working order, hyd row change, auto steer etc, only done very small acreage last 6yrs, selling due to retirement & available immediately, having completed harvest. £9,995 ono. DG Rowlett Tel: 01354 638436/07780 930635 (Cambs). ALL new spare parts for CTM 544/554 beet cleaner, hopper trace, rollers, sprockets, links & joining parts. £650+VAT. PJ Warren Tel: 01473 890236 (Suffolk).

CLAMP sheets 5x25mx9.8m, bought Dec 2014 from British Sugar, never used as not required. £180 each, £750 for 5. Can ship. I Metson Tel: 07791 029380/01279 876215 (Essex).

STANDEN front linkage to ﬁt hoe or turbo topper, bolts to chassis of tractor, pipe to rear. GW Harrold & Partners Tel: 07836 751076 (Norfolk).

r ul ds ga • F econ orru own s x/C our y o • B ut to •C

J. RILEY All machines available overhauled Enquire for more details

Tel 01603 262526 Jeremy Riley Mobile 07836 366289 or Henry Baker Mobile 07825 631377 FOUR beet heap frost protection sheets (2 sizes). A Bell Tel: 01205 460268/07720 495007 (Lincs). MONOSEM Mecca 2000, 12 row hydraulic parallel folding beet drill, bout markers, electronic tramline kit, pre emergence markers, loads of spares including new set of cell wheels, excellent condition all round, good heavy solid drill. £5,500+VAT. ER Grifﬁn Tel: 07939 151164 (Lincs). VICON/KLEINE/GARFORD sugar beet drill aluminium cell wheels, 5 holes, part number 0553, new. GW Harrold & Partners Tel: 07836 751076 (Norfolk).

Peter Barker 01483 200477

W A N T E D

MOBILE mains toilets, ball hitch, currently in male/female configuration but can be changed as required. Four inch waste pipe to connect to sewer, a tank or drop into a manhole cover included, as is a long length of alkathene for mains water. £500 J Sayer Tel: 01371 870123 (Essex).

0845 459 4079 KIT BUILDINGS

steelwork, eaves beams, purlins & bolts, 60x30’ from £2,545+VAT ex works

www.kitbuildings.co.uk

SIX mains ﬂuorescent outside lights, 10” square, suitable for wall ﬁxing, all in working order with bulbs, £30 the lot. J Sayer Tel: 01371 870123 (Essex).

PETER WRAGGE SUPPLIES

BEET HARVESTERS UK LTD

IMPORTERS OF THE VERVAET TANKER 6 ROW SPECIALISTS 2008 Vervaet 6-25 1999 Vervaet 17T Thyregod T7

G, & forPhone a free FIN ING N brochure O O D O R AD ATI ory CL SUL IAL ime/Fact r R IN ATE /Non Pble files ents M l Prime availated Proequirem

Old Barns Old Tiles Old Bricks Stone & Oak

STANHAY RALLYE 590 s/beet drill (choice of 2), both 6 rows, orange/black paint, rubber press wheels, ceramic tip, £1,200 each ono; also Stanhay Webb 5, 12 row s/beet drill, orange/cream paint, spares or repair, £1,000 ono. TJ Reeve Tel 07880 676290 (Suffolk) F693 STANHAY 592 rigid 9 row sugar beet drill in excellent condition, set at 20” row width, c/w Snowﬂake low loader trailer, also in good condition. £1,800+VAT. J Savory Tel: 07584 308120 (Norfolk).

BOILERS, INCINERATORS, HEATING & OVENS FARM 2000 HT70 biomass boiler 160KW, this will burn wood, pallets, straw bales, etc, vgc. N Watson Tel: 07517 500481 (Derbys). WASTE oil heater, all there but no ﬂues. £80 no VAT. B Clay Tel: 01902 842262/07833 374480 (Staffs).

Tel: (01449) 737192 Fax: (01449) 736666

F08-01B

NEW Holland 68 Super Hayliner baler. £300 ono. J Pulford Tel: 07803 698714 (Essex). SLEWTIC wrapped bale handler, rollers over tines type, c/w Euro brackets & hydraulic hoses, excellent condition, light use. £550+VAT. R Lintott Tel: 01728 663476/07799 473374 (Suffolk). STRONGA bale grab with Sanderson/ Claas brackets. £1,500. J Ridley Tel: 07850 138851 (Beds). TANCO 280 ARC round bale wrapper, 2008, RDS Expert controller, auto wrap, tie & cut, 1.2-1.5m dia bales, 750mm ﬁlm disp, ext axles, std bale ramp with accumulator, r/lights, side load/stationary use, hardly used, very low bale count, exc cond. D Todd Tel: 07768 553833/01462 813390(T) (Beds).

CRASH BARRIERS & RAILWAY SLEEPERS

2015 Unused Herbst 14t dump trailer, hyd back door, 10 stud hubs, sprung drawbar, hyd brakes, mudguards & flaps £7,750

Please see website for more stock

BALERS & BALE HANDLING (cont)

MOTORWAY

www.peterwraggesupplies.co.uk POULTRY shed, 100’ x 24’ dismantled, sectional, wooden, needs new asbestos type sheets. GMD Stallard Tel: 01531 890350 (Glos).

Concrete pipes F08-43B

2011 Bobcat E14 mini digger, 2330hrs, 1302kg, expanding tracks, hammer lines, twin speed tracking, c/w grading bucket £8,500

F06-08B

Buy and sell online – www.farmads.co.uk

2009 JCB 524-50 telehandler, 3655hrs, 5m reach, 2.5t lift, turbo, joystick, 4ws/2ws/ crab steer, hyd aux for grab etc, good tyres, 1 owner, c/w pallet tines £19,500

CLADDEX LIMITED 0845 459 0246

ANTIQUE BUILDINGS LIMITED

METAL SHEETS - galvanised and PVC coated steel, corrugated or box profile First and Second Quality Non asbestos Big Six and Std. 3in. sheets Fittings and accessories

F06-06B

2013 ROPA Tiger V8 3 high spec 2013 ROPA Panther top spec with Active Stabilisation 2012 Vervaet 617 vgc, low use 2009 Holmer T3 refurb,(T)excellent 2001 Vervaet 617 45/50 variable

sheets and fittings BEST PRICES sales@claddex.co.uk www.claddex.co.uk

QUANTITY galvanised coil nails on paper strip. No sensible offer refused. GR Walton Tel: 07860 826033/01359 230049 (Suffolk).

ROOFING MATERIALS

Beet Harvesters

CLADDEX Eternit fibre cement

GT INDUSTRIAL DOORS are an Essex based company that provide doors for all your farm needs. To get a quote, call today on 01277 523696. Essex. (T)

2009 JCB 524-50 telehandler, 3063hrs, 5m reach, 2.5t lift, turbo, joystick, 4ws/2ws/ crab steer, hyd auxs for grab etc, good tyres, one owner, c/w pallet tines £19,750

F08-28B

F08-26B

NEW discharge elevator webs for Standen Tornado beet harvester. RG Warnes Tel: 07775 700244 (Norfolk). PETER Standen Tornado beet harvester, 2 row, c/w John Deere 2140 power unit, B reg, 5195hrs, also most parts to return as a tractor, stored under cover, gwo. £6,500. JW Church Tel: 01508 518728/07798 573166 (Suffolk).

12C29B

SONATA II park home, 36'x20', 2 bedrooms, 1 en-suite, open plan living & dining area, separate bathroom with shower over bath, oil fired central heating, will include 500 gallon oil tank, integrated kitchen & some furniture. £37,500. CJ Clackson Tel 07775 500716 (Suffolk) F688

375mm x 2.5m long

£80+VAT

Andrew H Gemmill

07767 891328/01702 202930(T) SITE ofﬁce cabin, 32’x10’, in good condition but roof requires some attention, electric heating, hard wired, also has Cat 5 installed. £1,750 ono. Can be viewed, please call. CJ Clackson Tel: 07775 500716 (Suffolk).

PRESCO 32’x10’ steel frame Portacabin, watertight, 2 rooms, can deliver. £400. T Clowes Tel 07768 232881 (Suffolk) F674

www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 90

19/11/2015 15:57

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

Pecks AgriTrac SP EC IA L

ST AR

OF FE R

12C28B

W – 31021085 – New 8250 Case IH axial ﬂow combine, Accuguide, engine comp kit, rotary dust screen, hi-cap unloading system, 620 r/tyres, 24” std Accutrac system, 3050 35’ header & trolley, twin vert hyd side knives, low rpm tine auger, crop lifters................................................POA

W – 11020770 – ex demo Puma CVX 230 Case IH tractor, 50kph, full susp, air & hyd brakes, front links, 4 speed PTO, 650/75R38 & 600/65R28 tyres, radar, 364hrs .............................................. POA

W – 41021010 – ex demo Puma CVX 230 Case IH tractor, Accuguide, Michelin 650/65R42 tyres, 173hrs ........................ POA

W – 51021286 – 2015 600mm Amazone tooth packer roller .............................................. POA

W – 11020332 – used KG603-2 Amazone power harrow, 6m hydraulic folding power harrow, 600mm steel packer.........£7,350

W – 41021626 – 2012 STX 550 Case IH Quadtrac, group 100, rear linkage, 6 remotes, drawbar, luxury cab with suspension, 30” tracks, auto steering ready, 5500hrs ...........................................................£95,000

W – 41020232 – ex demo Cirrus 6003-2 Amazone drill, tronic – 3600L seed hopper, track eradicators, crush board, Amatron 3, electric metering & tramline system..............................£64,950

W – 31019611 – 2014 ZAM 2200 Amazone spreader Special, Amados control, 18–24m discs, LH border spread, road lights, 2200 extension..................£6,500

W – 21021414 – 2013 ZA-M 4200 Amazone spreader, Ultra Proﬁs Hydro 4200 spreader, 4200L capacity, 36m ....................£8,995

W – 41020539 – 2015 ZA-M3001 Proﬁs Hydro Amazone spreader, weighing system, hydraulic drive, Amatron 3, 6 section shut off, om 24-36 discs............................ POA

W – 31020541 – 2015 ZAM3001 Proﬁs Tronic Amazone spreader, weighing system, PTO drive, Amatron 3, om 24-36 discs .............................................. POA

W – 51020553 – 2015 ZA-TS 4200 Amazone Ultra Proﬁs Hydro spreader, hydraulic drive, 8 section shut off, amatron 3, ts3 discs, 24-54m ....................... POA

21019922 – 2014 TLT35D 4x4 JCB Teletruk, 5 spool valve block, compete Changeezee system, inc bucket & tines,110hrs.....£36,500

21018988 – 2012 541-70 AGRS JCB Loadall T4, Q-ﬁt carriage, LTS slip diff front axle, hyd pin lock, immobiliser key pad, 1692hrs .............................................. POA

NEW AND USED DOWDESWELL PLOUGHS AT VERY COMPETITIVE PRICES

41020814 – 2009 7230 JCB Fastrac, 710/70R42 & 540/65R34 tyres, front linkage, 6400hrs .........................................£51,500

J – 21019815 – ex demo, 8310 Fastrac, f/PTO, 650/75R38 & 540/65R38, 4 spool high ﬂow, frt linkage, pick up hitch/ draw bar, f/aux hyd, 5yrs/3000hrs Traccare .......................................£119,500

J – 11020449 – 2012, 353-95 AGS JCB Loadall Agri Super, serviced, 2yrs/1000hrs Driveline cover, 4650hrs............................£40,950

J – 11021340 – 2009 526-56 Agri JCB Loadall, 40kph, powershift, Q-ﬁt, air con, trailer brakes, 12 months cover, 2988hrs ..£33,500

Contact JON WAREING on 07818 030561 for further details

J – 41021071 – 2008, 531-70 AGS JCB Loadall Agri Super, 17.5L24 tyres, 6947hrs .................£28,500

51021149 – 2014, 418S T4 loading shovel, Michelin 620/75 Mega XBIB, 48kph, boom suspension, Q-ﬁt carriage, Agri Q-hitch, smart reverse alarm,1200hrs ........ POA

J – 11020503 – 2010, 515-40 AG JCB Loadall, pallet forks, 10.0/75R15.5, 6, 6mths Driveline cover, 1266hrs ................£23,500

51020093 – 2014 JCB 516-40 AGRI Loadall, Starco TL 255/7515.3 tyres, quick hitch, ind forks/ frame beacon, 191hrs.....£31,000

11020797 – 2001, 540-70 Farm Special JCB Loadall, hydraulic tow hitch, new 460/70R24 tyres, loler, 6900hrs.............Was £19,500 NOW £17,500

IC PR EW N

J – 11021061 – 2013, 3230-65 JCB Fastrac, 540/65R34 TM 800, Cat 3 rear linkage, 7000kg lift, 4 rear spool, pickup hitch, draw bar, rotating beacon, 3900hrs .........................................£72,000

41020376 – New 105 plough, 5+1, 5 furrow basic, extra furrow, rear disc, depth/transport wheel, DDS, 12mth manufacturer’s warranty ............................................................................................POA 21019843 – Ex demo 145 plough, 6 furrow basic, extra furrow, rear disc, HD wheel, DDS bodies ...........................................................POA 21020949 – New MA125 plough, 6 furrow, rear disc, DDS bodies, 12mth manufacturer’s warranty......................................................POA 41019352 – 2011 MA145 plough, 7 furrow reversible, slatted boards, rear disc coulter, skimmer, heavy duty wheel.................................POA 21020950 – New MA145 plough, 5+1 furrow, HD wheel, DDS bodies, rear disc, 12mth manufacturer’s warranty ........................POA 21020951 – New MA145 plough, 6+1, HD wheel, DDS bodies, rear disc, 12mth manufacturer’s warranty .............................................POA

11021470 – 2012 JCB 3200-65 Fastrac, Tier 4, 6000hrs .£53,000

Buy and sell online – www.farmads.co.uk

W – 41020941 – 2015 Puma 215 EP Case IH tractor, 50kph, LH mounted rotary beacon, air & trailers brakes, baler bar, 540/65R30 & 650/65R42 tyres, guidance ready armrest....... POA

W – 11021011 – ex demo Puma CVX 160 Case IH tractor, f/links, 50kph eco, 16.9R30 & 20.8R42 tyres, elec hyd remote valves, 160hrs................................... POA

21019709 – 2003 416HT JCB loading shovel, new 17.5-25 tyres, one auxiliary.............................................................Was £24,000 NOW £15,950

FOR MORE INFORMATION PLEASE CONTACT • W – WAYNE COTTAM ON 07795 600043 • J – JON WAREING ON 07818 030561 • OR VISIT OUR WEBSITE WWW.PECK.CO.UK ELY – TEL 01353 664515 SPALDING – TEL 01775 712310 MAREHAM-LE-FEN – TEL 01507 568484

www.facebook.com/Pecks-AgriTrac

December 2015 www.farmads.co.uk 91

farmers_guide_class_december_15.indd 91

18/11/2015 12:30

1987 2005 2002 1973 2012

Case 885XL 4wd new clutch & front tyres – a genuine good buy ..........................£5,500 JCB 526S – serviced & ready for work – q/fit carriage........................................£18,750 JCB 526 – 8900hrs but still a very useful loadall ................................................£14,750 Sanderson 725 loadall – a very tidy machine – worth viewing ..............................£7,500 Dieci 40.7 vario loadall – 2500hrs – due in shortly – very well maintained ..........£29,000 2012 McCormick X60.40 4wd – genuine 600hrs only – this is immaculate an exceptional buy – don’t miss this – finance available

1995 2010 2009 1994 1994 2008

Valmet 8100 4wd, 120hp – high hours but extremely reliable & sound..................£8,950 McCormick TTX230E, 50kph, air brakes, f/linkage & PTO – extensive overhaul ...£29,000 Deutz K610 ALO C60 loader – 4000hrs – a really nice tractor .............................£28,500 Ferguson 6180 4wd with loader – very tidy, good tyres – runs well ....................£11,500 Case 5140 Maxxum – this is in daily use – a good reliable tractor.........................£7,750 McCormick XTX165E – 165hp – ideal extra tractor – only .................................£27,000 Kuhn 5 furrow Multimaster 151 plough, kick back legs, slatted bodies – good ......£5,650 Rabe 4 furrow slatted bodies – extensive re-build of wearing parts .......................£3,750 Western 12t dumper trailer, super singles, sprung axle – choice of two from.........£2,500 Reco Ferri hydraulic swing out 2m flail mower – good for banks/dykes.................£3,000 Falcon 1.2m professional roller mower – really tidy – no vat ....................................£600 Choice of Lely SX4000/Centerliners – overhauled & ready for work Fleming 8’ x 30” diameter flat roll – trailed & mounted .............................................£995 Countax 18hp C800 ride on mower – full electrics – 36” cut – very nice...............£1,650

NEW McCormick X6.430 4wd – 121hp (boost 133hp) 4 cylinder – a superb tractor for the smaller farms – exceptional warranty & finance – ring for details

Buy and sell online – www.farmads.co.uk

Accord 4m grain drill/Farm Force Drillmate – Suffolk coulters – good condition.....£2,500 2009 Chilton MX-U10 front loader – as new – suit Claas/ Renault ..................................£4,000 TWB 3m flat lift, swivel legs, razor ring, packer – demo model – only ...................£8,500 Portequip calf creeps/beef feeders/pig feeders – ex stock New Eco-Rider petrol 2 wheel farm bike – low ground pressure – knockout price Bomford 528 hedger – bracket mounted – cable control – very tidy......................£1,600 Teagle 9090 trailed straw bedder/blow – straight from farm – cheap Wide selection of buckets/grabs/bale handling – new & used – ex stock 2013 Weaving 3m Subdisc with vari 8 Opico seeder – immaculate ................................£8,950 2003 Kverneland 4.8m tine drill – mounted – very tidy & cared for ................................£8,500 4.8m Flexicoil front folding press – this is worth viewing – a good buy .................£4,250 End of season deals on Hayter mowers – very attractive terms – ring now

Designed for use in very tough conditions, RASCO winter equipment for tractors is very competitively priced without any compromises on quality. Oﬃcial UK & Ireland Distributor

WF10 5UB Castleford

Bob Elliott: 07976 359799 Ken Grindrod: 07976 355334 Simon Collins: 07811 371654

sales@pelican-eng.co.uk www.rasco.co.uk

12C26B

Robert D Webster Ltd Farm Machinery Distributors & Agricultural Engineers Used Tractors 2012/12 NH T7250PC 50kph, cab/FAS, front linkage, PUH, t/a rams, 4DSVS, on 620/70x42 & 480/70x30, 3282hrs

2011/11 NH T7050PC 40kph, cab/FAS, front linkage, PUH, t/a rams, 4DSVS on 650/65x42 & 540/65x30 tyres, 4227hrs

QUALITY COMBINES 2013 NH CR 9080, 30’ VariFeed, 4wd 2013 NH CX 8040, 20’ VariFeed 2012 NH CX 6080, 20’ VariFeed, Smartsieve 2011 NH CX 8080 SL, 25’ VariFeed, 4wd 2011 Claas Lexion 750, 25’ Vario, 3D 2009 NH CR 9080 Elev, 30’ VariFeed 2009 NH CSX 7060, 20’ VariFeed, Smartsieve 2005 NH CR 980, 30‘ + Biso ext 2005 John Deere 9780 CTS, 22‘, HillMaster 1994 NH TC 54, 13‘ HC header Each with chopper, chaff spreaders, trailer

2010/10 NH T6080RC 50kph, cab/FAS, PUH, t/a rams, 4DSVS on 520/70x38 & 420/70x28, 4953hrs

2008/08 NH T7060PC 40kph, cab/FAS, PUH, t/a rams, front linkage, 4DSVS on 650/65x42 & 540/65x30, 2266hrs

2007/07 NH T7050 Ultra 50kph, cab/FAS, PUH t/a rams, 4 electric valves plus extra valve on joystick on 650/75x38 & 600/65x28, 5081hrs.

12C01A

Please contact Alan Jordan – 07970 805370 David Hirst – 07792 927432

East Street, Kilham, Drifﬁeld, East Yorkshire, YO25 4RF

01262 420226 • After hours 01262 420403 92

www.russells.uk.com 12C03A

New Holland Dealers in Yorkshire

www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 92

19/11/2015 09:58

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

CLAAS Southern Russell Hallam

Tel: 01622 892572

Mob: 07919 887863

claas-southern.co.uk

2009 CLAAS VARIANT 360 £9,600 rotofeed round baler 22000 bales, in excellent condition Aaron Dadswell 07741 271530

2010 CLAAS CORTO 3100NC £8,500 3m trailed 4 drum mower conditioner, good condition Russell Hallam 07919 887863

2011 CLAAS LINER 2900 £10,500 twin rotor swather, very tidy Aaron Dadswell 07741 271530

2012 CLAAS VARIANT 365RC £14,995 rotocut, 2.2m pickup with roller crop press, hardly used Russell Hallam 07919 887863

CLAAS AXION 820 CIS 50K SPECIAL 5000TH EDITION £60,500 front linkage, 710R38 tyres, 2074hrs, CLAAS approved tractor with warranty Aaron Dadswell 07741 272530

2012 VOLTO 1320 £16,500 13.2m, 10 rotor tedder, in excellent condition Aaron Dadswell 07741 272530

2014 FRANSGARD TI 6000 £6,500 6m mounted swather, hardly used Russell Hallam 07919 887863

2010 CASE IH PUMA 210 50K £39,950 front suspension, cab suspension, nearly new tyres, 4400hrs Tom Hubbard 07827 894218

2013 LELY STABILO 770 £6,600 7.7m, 6 rotor tedder hardly used Aaron Dadswell 07741 272530

CLAAS LEXION 2008 580TT £100,000 9m, vario, 3D, Q, power spreader Gary Jackson 07850 358790

CLAAS LEXION 740 £115,000 2012. 7.5m vario, 3D, Q, air compresser Gary Jackson 07919 887863

CLAAS LEXION 770 £195,000 2013, 10.5m vario, 3D, Q, AC, laser pilot, power spreader Tom Hubbard 07827 894218

LANDINI POWER MONDIAL £28,500 120 62 plate, Q 41 loader, AC Aaron Dadswell 07741 272530

CLAAS LEXION 530 £75,000 2006, 6m vario, 3D Russell Hallam 07919 887863

CLAAS QUADRANT 2200 POA tandem axle, 2007 Tom Hubbard 07827 894218

Buy and sell online – www.farmads.co.uk

2009 CLAAS AXION 810 CEBIS 50K £35,000 front linkage, very tidy 4500hrs Aaron Dadswell 07741 272530

12C14B

December 2015 www.farmads.co.uk 93

farmers_guide_class_december_15.indd 93

18/11/2015 09:54

CLAAS Mega 204, 1994, 3100hrs, 3D sieves, chaff spreader chopper, immaculate condition, maintained regardless of cost. £26,950 ono SM Sedman Tel: 07778 156656 (N Yorks).

WIDE topper 6m MF combine header with Honda petrol motor to drive combine blades, light mowing. R Rayner Tel: 07808 066655 (Cambs).

MCCONNEL backhoe, gwo, inc 3 buckets. £795 ono. R Pusey Tel: 07711 712527 (Bucks).

DOORS GARAGE doors, 2.4m x 2.2m, with up & over workings. Bargain at £100 each. A Goodacre Tel: 07901 917707/01476 861672 (Lincs).

DRILLS CLAAS LEXION 480 EVO 2002, 7.5m vario, 2006, 3314hrs, 2284 drum hrs, OSR kit, R/H knife, L/H laser, yield meter + printer, moisture meter, header reverse, dust extract, returns monitoring, 3D sieves, 800/65R32, 600/55-26.5, very clean. £48,500+VAT. D Pettitt Tel 07711 532310/07732 417966 (Caerphilly) F689

Tom Alderson Land Drainage Machinery Ltd New & used land drainage equipment • Digging chains • Cutters etc

JOHN Deere 2054 combine harvester, M reg, 1994, 2000 drum/2500 engine hrs, c/w straw chopper, 816 header, Zurn side knife available, serviced & ready to go, excellent condition. £28,000 ono. N Hall Tel: 07812 212557 (Hereford).

POA Well maintained handy size drainage machine, straight from work, 10t approx, Ford 6 cyl diesel eng, mechanical track drive, good tracks, narrow digging chain, approx 5000hrs

Hall Farm, Aldeburgh IP15 5JD Cousins combination harrow ............ £500 Alpego HD 4m power harrow c/w rear linkage .......................... £750 Kuhn 1121 fertiliser spreader ........ £1,000 Stegsted 4m tine drill........................ £200 Nordsten 4m tine drill ....................... £500 Claas Rollant 44S & NH 377 conventional baler........................ POA Lely 400-45 power harrow with linkage ............................. £1,700 Claas Dominator combines (various) . POA

WANTED – Claas/John Deere combines – pre-2000

BUILDINGS & MATERIALS (cont) STATIC mobile home, 35’x12’, 4 beth, vgc. Offers. I Clark Tel: 07718 918400 (Beds). TELEGRAPH poles, 8, 30’ long, all sound. £250. RT Jones Tel: 01954 250818 (Cambs). VENTAIR plastic coated steel sheets, colour Merlin grey, to ﬁt building 12m x 12m x 5m high, new, over ordered. £1,500 ono. M Grifﬁn Tel: 07957 995941 (Essex)

CHEMICALS CHEMICAL steel storage containers, new or used, 10’ or 20’ sizes, BASIS approved, secure. Delivered & ofﬂoaded around UK. Tel: 0800 121 7388. (T) www. chemicalstorage4farmers.co.uk

COMBINES & HARVESTERS CASE combine knife drive wobble box, bought as part of a job lot of spares, appears to be in good condition, don’t know if it’s been used or not. N Jackson Tel: 01794 340498 (Hants).

CASE CX130 13t steel tracked excavator, good condition. £12,950+VAT. Phone for more info. BG French Tel: 01371 872907/07718 536616. (Essex). CAT 307B 7t rubber tracked excavator, 2000, good condition, must be seen. £10,950+VAT. BG French Tel: 01371 872907/07718 536616 (Essex).

2010 Terex 860

MASSEY FERGUSON 510 air drill, 6m, Suffolk coulters, just drilled 50 acres, clean & tidy, spare/repair due to mouse damage. Offers. RJV Horner Tel 07769 806840/ 01234 824068 (Beds) F695

12C48B

FOR SALE OR HIRE

CLAAS DOMINATOR 98S 1989, 15' header & trolley, Perkins engine, mechanical drive, 3260hrs with chopper, new rear tyres & battery this season, Claas dealer maintained annually, always stored under cover, side knife available. £14,500 ono. NJ Herring Tel 01652 648258/07812 435186 (Lincs) F685

£22,500+VAT

AMAZONE 4m combination drill, Quick ﬁt tines, tyre packer, partial rebuild in 2013, drill has 3 rows Suffolk coulters, tramlining, hyd depth control, markers, removal kit & other extras, both in good condition. £6,500 ono. AM Twidale Tel: 07973 412894 (Notts). CARRIER 4m tined drill, later model, new pipes, good spring tines & transport trailer. £900. M Hornbuckle Tel: 07801 101645 (Leics).

MF40RS combine, working order, owner retiring. £10,000 ono. HA Robinson Tel: 01964 536699 (E Yorks). NEW electromagnetic revolving clutch power supply for the chopper of New Holland TF Series combine, etc, made by Warner Electrics 5305-178-043. GW Harrold & Partners Tel: 07836 751076 (Norfolk).

NEW HOLLAND CX840

2004, FS, 2656/2106hrs, 24’ header, on 800 front tyres Hire available @ £20/acre (based on just 3yrs, cutting 800 acres, including Harvestcare Extended Warranty)

Call Steve H 07824 815364(T) CLAAS 480 Evolution, 2002, 7.5m vario header, auto contour, twin side knives, laser pilot, compressor, 3D sieves, yield mapping, yield meter, moisture meter, printer, engine hrs 2678, drum hrs 2055, in very good condition. S Dudley Tel: 07860 599377 (Herts). CLAAS Dominator 108SL combine, gc except spout fault. S Hill Tel: 01603 759536/07881 786690 (Norfolk). CLAAS Dominator 98S, 4000hrs, very well cared for, 15’ header, 1994. Offers. A Prinold Tel: 07967 145543 (Staffs).

1990 CASE 1680 combine, always been main dealer serviced regardless of cost every year, in good working order, cut 450 acres this year without problem, always been dry stored, 3335 engine hrs. £12,000+VAT. EW Sykes Tel 07717 824989 (Cambs) F671 NEW Holland TX66 M reg, 20’ header, 2950 drum hrs, 3400 engine hrs, self levelling sieves, yield mapping & monitoring, Loewen concave, new thrasher rotor, new tyres. £25,000. P Clarke Tel: 07710 775829 (Cambs). PAIR of Claas TM6 frog mouth sieves, to ﬁt 580(+) or 560/760, 6 straw walker combines, improves sample quality. GW Harrold & Partners Tel: 07836 751076 (Norfolk). SET of used Claas bean concaves to ﬁt 580(+) or 560/760, 6 straw walker combines, can also be used to improve throughout. GW Harrold & Partners Tel: 07836 751076 (Norfolk).

Tel: 01206 273111 Mobile: 07808 065235

www.cautrac.com

F29-12A

www.drainagemachine.co.uk

Tom 07872 916363

DIGGERS, DOZERS & DUMPERS

JCB 3CII wheeled excavator, 1975, good working order, LOLER certiﬁed. £1,850+VAT. KA O’Neill Tel: 07802 661770 (Shrops). JCB 3CX Sitemaster, Powershift Smoothride turbo, 4100hrs, FSH, owned from new, vgc, maintained & serviced every 250hrs regardless, piped for hammer & street pads, toe plate on front, manual Q-hitch. £19,950+VAT. D Clayton Tel: 07836 204646 (Derbys).

New Holland 95

£10,950+VAT turbo digger, 4wd, 1997 reg, 4100hrs only, 4-in-1 forks, Extender V5, rears 60%, fronts new

Call Stewart on

07973 117993

F12-13B

email: aldersontom@hotmail.com

Pains Hall Lane, Lovesome Hill, Northallerton DL6 2PS

Deutz DX 89 HP, turbo 4wd tractor . £4,000 Ford 8100 2wd tractor PUH ........... £4,000 Berthoud 12m, 1000L manual folding sprayer............................ £450 Case David Brown 1594 2wd hydro-shift PUH ...................... £3,000 Amazone power harrow ................ £1,800 Landini 9880 tractor 4wd PUH ...... £6,500 Zetor twin drum mower .................... £400 Tim Howard 5 leg subsoiler c/w packer & spares ................ £3,500

ZURN mechanical drive side knife to ﬁt John Deere 800 Series header, c/w mounting bracket & all ﬁttings, excellent condition. £675+VAT ono. R Lintott Tel: 01728 663476/07799 473374 (Suffolk).

12C54B

01609 881570

F10-57B

Buy and sell online – www.farmads.co.uk

Bruff BT3

DEUTZ FAHR M2680 combine, 1986, 14' header & trailer, 3440hrs. £5,750+VAT. D Pridgeon Tel 01507 450241/07775 515368 (Lincs) F253

ACCORD DL spares - eradicator tines, coulter springs, fan belt, sensors & many other bits & pieces too numerous to mention. Please ring for details. £150+VAT the lot. R Yeldham Tel: 07889 520967 (Essex).

JCB MkIII, gc for age, 2 buckets, suit home build. £1,995. TJ Barnes Tel: 01353 665912 (Cambs). MF 50B digger without digger arm, starts & runs OK, with forks, bucket & muck fork, must go. Offers. G Graham Tel: 07846 259920 (Warks). THREE-TON 4x4 dumper, good working order, £2,500; JCB 12” bucket, 3CX, £100; JCB front wheel, complete, £90. BL Colson Tel: 01284 828251 (Suffolk).

2008 4M CLAYDON SR DIRECT DRILL c/w A hoes, splitter boots, small seed kit, bean kit, press wheels, harrow kit & batter boards, in exceptional condition. £14,500. Can email pictures on request. P Partridge Tel 07775 640801 F667 (Suffolk) HEAVY duty frame, straight Simba legs, levelling harrow, packer roller tynes, pre-em markers, 3m, ideal small beans drill, Fiona box drill mounted. £850. R Baker Tel: 01953 850238/07801 557640 (Norfolk). KUHN Megant 600, late 2012, not used until 2013, hyd fan, half width shut off & pre-markers, very good condition. £18,500+VAT. H Saunders Tel: 07748 140502 (Beds). LELY combi pneumatic 3m drill (drill only). £1,900. A Bell Tel: 01205 460268/07720 495007 (Lincs). SIMBA 5.5m press rolls, c/w leading tines & DD rings. £5,750+VAT. D Compton Tel: 07764 687201/01767 262055 (Beds).

www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 94

19/11/2015 16:14

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

Tel: 0333 6000 670 sales@doubledaygroup.co.uk www.doubledaygroup.co.uk H

2013 JD 8360RT AP 40k 3916hrs, 4ESCV, AT ready, climate control, 25” tracks, active seat, pass seat ......................................... £90,000

2014 JD 6150R AQ 50k 1461hrs, TLS, cab susp, air brakes, 3xSCV, cold start package, H3 beltline lights, iTec, climate control ..... £55,000

2012 JD 6630 Prem AQ Plus 40k Eco 874hrs, TLS, HCS, 3SCV, air seat, pass seat ................................. £43,750

2005 Vaderstad RDA600S c/w staggered wheel, pre em markers, following harrow & new discs . £34,000

2015 JD 6210R AQ 50k 650hrs, TLS, cab susp, air brakes, 3SCV, D63C air seat, pass seat, AT ready, iTec, power beyond, front linkage & PTO ......................... £79,000

2015 JD 6150R AP 50k 460hrs, TLS, cab susp, H64C air seat, hyd top link, 4ESCV, front linkage & PTO, front SCV, E-icv 3 function joystick, AT ready, air brakes .. £75,000

2011 JD 7280R AP 50k 2962hrs, TLS, 4ESCV, front linkage, AT ready, climate control ............. £62,500

2013 JD 6170R AQ 50k 1354hrs, TLS, cab susp, air brakes, D63C air seat, pass seat, 3ESCV, front & rear roller blind, H3 beltline lights ....................................... £62,000

2013 JD 6150R AQ 50k 2378hrs, TLS, cab susp, air brakes, 3ESCV, power beyond, H3 beltline lights, climate control, iTec, H64C air seat .......................... £45,000

1996 Vaderstad RD600P 6m drill c/w system Agrilla crossboard light, following harrow, pre em markers & smooth tyre .............................. £9,250

2014 JD 6150R AQ 50k 1219hrs, TLS, cab susp, 4ESCV, AT ready, D63C air seat, front linkage, turnable front fenders, iTec, air brakes ................................ £57,000

2014 JD 6150R AQ 50k 1427hrs, creeper, TLS, cab susp, air brakes, 3ESCV, cold start package, H3 beltline lights, iTec, climate control .................................... £57,000

2014 JD 6125R AQ 40k 1737hrs, creeper, TLS, cab susp, 3SCV, A/C, touchscreen display, front linkage, D63C air seat, pass seat, iTec . £44,000

2001 JD 8410T PS 7426hrs, 24” tracks, drawbar, A/C, air seat, 4SCV ......................... £27,000

2012 JD 7230R PQ 40k 1381hrs, TLS, active seat, AT ready, 4ESCV, A/C, pass seat, front linkage, touchscreen display................ £69,500

2012 Manitou MLT 627 PS 3236hrs, A/C, PUH, turbo, pallet forks, 17.5LR24................................. £27,500

2013 JD 6210R AP 50k 970hrs, TLS, cab susp, 4ESCV, climate control, heated air seat, pass seat, air brakes, front linkage ............... £74,500

2015 JD 6115R AQ Eco Creeper 40k 444hrs, TLS, cab susp, large hyd pump, 3ESCV, multipower outlet strip, H64C air seat .................................... £48,500

2014 JD 6115R PQ 40k 1291hrs, creeper, TLS, cab susp, 3SCV, A/C, D63C air seat, touchscreen display, multipower outlet strip............................... £39,500

2010 Kubota M9540 c/w loader 2524hrs, air seat, 2SCV, A/C, LA1353 loader, 3rd service.................. £23,500

1997 Zetor 6341 Super Economy 4wd 2720hrs, front linkage, 3SCV....................................... £12,750

2010 Vaderstad CR420 Carrier system disc, hyd lev board, rear lights ................................ £19,750

Buy and sell online – www.farmads.co.uk

2011 JD 8295R PS 40k 4888hrs, ILS, active seat, 4ESCV, AT ready, front weights, stocks tracks, Goodyear 650/85R38 - 540/75R34, rear wheels weights ................ £69,000

2014 He-Va 4m hyd folding subsoiler 7 leg, steel ring packer, hyd depth control .................................... £12,500

2015 Bailey 15t trailer NEW LED lights & beacon, mud guards flaps front & rear, grain chute, hyd brakes, Alliance 500/60R22.5, choice of 2.............................. £16,000

12C45B

Holbeach Tel: 01406 540 261 Fax: 01406 540 262

Kings Lynn Tel: 01553 617 666 Fax: 01553 617 673

Swineshead Tel: 01205 822 440 Fax: 01205 822 441

Holbeach St. John, Lincolnshire PE12 8SQ

Kings Lynn, Norfolk PE34 3EU

Station Road, Swineshead, Lincolnshire PE20 3PN

Vi sit ou f m or r w ac m e hi or bs ne e ite ry

December 2015 www.farmads.co.uk 95

farmers_guide_class_december_15.indd 95

19/11/2015 11:13

ra ers war ufactur n a m h Please call EW wit

MK Tractors

for more details

01462 813390 07768 553833

www.landscapemachineryhire.com

TUME 4001HKK 4m trailed box drill, 2t capacity, front & rear press wheels, drill can be used on the plough, min-till or direct, power requirement 20hp/m, new discs ﬁtted 150ha ago, needs a little TLC. £1,500+VAT. DR Spencer Tel: 07771 517462 (Cambs).

WEAVING CADDY 5T zero till seed drill, 6m, 5t hopper, new discs. £30,000. P Collick Tel 07885 933082 (Kent) F681 USED 3m Kv combi drill NGS p/ harrow, c/w packer, DA-X drill, CX discs, BTC tramlining, 2002, in good working condition. £6,800 ono. Delivery can be arranged. N Evans Tel: 07966 533015 (Shrops).

FENCING & GATES ARRIS rails, ex 75mm x 75mm, pressure treated, green, 100 plus available. £2 each or offer to clear. GR Walton Tel: 07860 826033/01359 230049 (Suffolk).

F694

VADERSTAD wing packers for 4m Rapid drill, good condition. £1,500+VAT ono. E Clark Tel: 07879 698807 (Norfolk). WEAVING Sabre tine 6m HD steel hopper, 2014, only done 1200 acres from new, half width shut off, RDS Artemis control, hydraulic fan. POA. N How Tel: 07714 240064 (Northants).

EQUESTRIAN CLEAN rye grass hay, 80/90x6’, 4 string, 150 available. £30/bale. DR Spencer Tel: 07771 517462 (Cambs). FIELD guard green electric fence tape, some new, cheap to clear. Ring for details. R Hill Tel: 07748 146139 (Norfolk). NEW equine muck trailers available, ramp over the drawbar, choice of 4t or 3t capacity, hydraulic tip. D Todd Tel: 07768 553833/01462 813390(T) (Beds). QUANTITY of cross country ﬂags, numbers & dressage sets. GR Walton Tel: 07860 826033/01359 230049 (Suffolk).

BOUGHT AND SOLD Sales and Hire of generators, lighting towers and fuel tanks, PTO driven sets, alternator rewinds and installation also available

YORKSHIRE GENERATORS LTD Tel: 01845 527486

www.yorkshiregenerators.co.uk DIESEL generator, 60KVA, gwo, very efﬁcient run, auto start unit, 300hrs, homemade, weather covered, exhaust silencer, possible noise silencer, 200L fuel tank. £2,950+VAT. R Rayner Tel: 07808 066655 (Cambs). FROMENT 30KVA PTO generator, with changeover switch. £400. T Clowes Tel: 07768 232881 (Suffolk). GENERATOR 6KVA, petrol, battery start, very soundly built, low hours £400+VAT. RJ Baker and Son Tel: 01953 603249 (Norfolk).

ENGINEERING FREE DELIVERY on

NEW Law Denis sieves Arch fountain mixers CAD Cleaners & Oliver Gravities S DISCOUNT SEASONAL W on NO

R FLOORS DRIVE OVE Crittall bins and panels All sizes always in stock

❏ Reconditioned Carier elevators, conveyors & spares ❏ Drying fans 15–60hp ❏ Choice of grain cleaners 3–50tph

Contact Robin on 01472 753936 07710 242015

Roy Edwards 07702 408833 Full engineering, installation & dismantling services

www.grainmachinery.co.uk CONVEYER sections, with their appropriate conveyer chains (6), can be used for grain or livestock feed, 14 sections in total, 3 sections with their motors, 1t scales/platform weigher, eg for weighing seed bags. EMS Shires Tel: 07834 285148 (Bucks).

Crop Drying and Storage Fans new & reconditioned. Grain Stirrers, Air Tunnels, Laterals, Drive On Floors, Gas Burners, Controllers, & Accs Equipment. Tel: 01526 342466/Fax: 343507 www.pellcroft.com

ASSORTED electric fencing, surplus to requirements, low prices. Ring for details. R Hill Tel: 07748 146139 (Norfolk). RAPPA steel stakes (100), each with 3 yellow insulators. £15 per bundle of 10. R Lilley Tel: 07740 109294 (Cambs).

2007 Teagle 8080 silage & straw chopper, electric controls, single 360deg chute, good condition, £3,600; also Keenan 100 FP with knives, £2,200. Genuine sale due to bereavement. T Davies Tel: 07970 010968 (Hereford). CLEANED stone-free fodder beet, hi dry matter enermax, ideal for stock & AD plants, available now & into next year. Ex yard £22/t or delivered at extra cost. SJ Edwards Tel: 07711 848763 (Shrops). GREEN silage wrap, 15 rolls, 375mm x 1500m, boxed. Fair offer accepted. GR Walton Tel: 07860 826033/01359 230049 (Suffolk). KVERNELAND 10X forage harvester, very good working order. £4,000 ono. C Dening Tel: 07813 004395 (Somerset). ORGANIC round haylage bales, 4’6”, in good order. Cheap at £25 each. A Goodacre Tel: 07901 917707/01476 861672 (Lincs). QUALITY round bale silage. Delivered or collected. CE Leadbetter Tel: 07834 233152 (Cambs). ROUND bale good quality ragwort free meadow hay. £20/bale ex-farm. SD Hitches Tel: 07726 344144 (Cambs). STUBBLE turnips for grazing, 43 acres, 70% fenced, we can look after the livestock daily if required. CE Leadbetter Tel: 07870 293052 (Cambs).

GRAIN walling, horizontal 185’ long x 7’ high, vertical dividing wall, 40’ long x 6’6” high, buyer dismantles. Best offer secures. GR Walton Tel: 07702 954299/07860 826033/01359 230049 (Suffolk).

Pellcroft Engineering Ltd Coningsby, Lincoln

SHEEP PEN great design, from galvanised box section, 4 pens & dip, hardly used, very good condition. Offers. N Lee Tel 01944 738143 (N Yorks) F677

FORAGE & SILAGE

KOCKERLING DRILL PRESS with arms & 3pt linkage. £1,000. J Hicks Tel 07539 367336 (Berks)

GENERATORS

SEED& CEREAL

F20-10B

Buy and sell online – www.farmads.co.uk

VADERSTAD RD 400C 2014 4m seed & fert box drill, system disc, staggered wheels, pre em markers, variable rate seed/fert, only drilled 400ha, in excellent condition, can email pictures on request. POA. P Partridge Tel 07775 640801 (Suffolk) F666

RICE double horsebox, metal sided, new wooden ﬂoor, old but usable. £500 ono. K Layman Tel: 01522 810326/07970 423522 (Lincs). SHIRE colt foal, black with 4 white legs, well marked, excellent pedigree, fully registered. Ring for further details. K Smith Tel: 01335 330346 (Derbys).

ARC-GEN 400amp, surplus to requirements. £2,500 ovno. W Smith Tel: 01724 763705 (Lincs). BULLDOG BDE 3500 E diesel generator, new & unused, electric start, 3.5KVA, very reliable & cheap to run. £350+VAT. DN Jackson Tel: 07889 956744 (N Yorks).

GRAIN walling - horizontal 185’ long x 7’ high; vertical dividing wall 40’ long x 6’6” high; buyer dismantles. Best offer secures. G R Walton Tel: 07860 826033/01359 230049 (Suffolk).

F26-01A

paddock cleaners, sweepers & leaf hoovers nty

F19-03B

STANHAY S981 6 row precision drill, good order, drilled less than 500 acres from new. Offers. A Bell Tel: 01205 460268/07720 495007 (Lincs).

F20-29B

Terra-Vac

GENERATORS

F14-12B

KIPOR KDE 5000 single phase diesel generator 6KW 2006, kept as standby, never used, had less than 10hrs use (started, run then stopped) as new, electric start, with h-d cable & sockets, a little smokey & noisy, outdoor use, weighs 200kg. £425+VAT. MM Whyberd Tel 07810 855070 (Suffolk) F678 NEW & unused Neilsen CT 1900 petrol generator, 6.5hp, petrol engine, recoil start, oil alert etc, 110v/240v, ideal for ﬁeld repairs etc. £130+VAT. DN Jackson Tel: 07889 956744 (N Yorks). PTO generator on 3pt linkage, 4.8 amp. WE Reain Tel: 07717 035048 (Suffolk).

GRAIN HANDLING/ STORAGE OPICO AND MECMAR driers bought and sold. Genuine parts available nationwide. Morgan Farm Machinery. Tel: 01604 780087 Northants (T) ALVIN Blanch 10/6 grain dryer, 10tph, diesel burner, dual air ﬂow, dismantled, sits on trailer, fully transportable. Cheap. R Rayner Tel: 07808 066655 (Cambs). AUGERVEYOR, 30’ long, 4.5” wide, on tripod, 240v. Offers. A Strawson Tel: 07881 684687 (not Sundays) (Suffolk).

Danagri High�Capacity Heavy�Duty�Mobile Grain�Augers 8”,�10”�&�12”�dia.

Also�Silos,� Elevators�&�Conveyors,� Driers,�Stirrers,� Fans�&�Accessories

Tel: 01746 762777 www.danagri-3s.com

GRAIN auger, 40’ long on a tripod with a hopper, 13hp Honda engine. £200. B Hull Tel: 07969 974614 (Essex).

OCTAGON PRODUCTS LTD

CROP DRYING & COOLING PRODUCTS

F34-25B

DRILLS (cont)

FANS GAS HEATERS LOUVRES TEMPERATURE & HUMIDITY CONTROL SYSTEMS

01327 877100

www.cropstorage.co.uk

GRAIN elevator, rubber belt type ﬁtted with grain hopper drawbar, 12.5.80 15.13 wheels, swivel head, 3 phase motor, 40’. £500+VAT. D Compton Tel: 07764 687201/01767 262055 (Beds).

KONGSKILDE grain handling equipment, 3 large grain silo, 1 small grain silo, 1 feeder, 1 fan, 1 auger, c/w all pipe work, also 1 cushion air 500 PTO sucker/blower fan in exceptional condition. Sensible offers considered. RG Galley Tel: 07799 570384 (Norfolk). MASTER 270D, 2014, 27t batch grain drier, diesel fired & electric operated, has been operated for approx 50hrs only, plus 29t 4m x 4m modular grain bin, unused & never assembled. Located in Cambridgeshire. C Gore Tel: 01858 411218 (Leics). MASTER drier, 12tph, 2300hrs, diesel, 1998, many new parts fitted last 2 years. £9,500. A Prinold Tel: 07967 145543 (Staffs). OPICO 580 drier, gas fired, full working order. £1,250+VAT. C Frick Tel: 07774 958613 (Lincs). OPICO quiet corn dryer, 9t, working order but scruffy, price reflects. POA. P Noble Tel: 07816 477293 (Cambs). REINFORCED corrugated iron personnel access doors for grain silo (8), Brice-Baker, internal 42”x35”, external 42”x39”, hatch 32”x30”. GW Harrold & Partners Tel: 07836 751076 (Norfolk). SVEGMA Model 2/3 continuous flow dryer, capacity 13tph removing 5% @ 125degrees, twin burners & exhaust fans c/w silencers, replacement modern control panel, furnace tubes good, covered barn stored since new, so vgc. DJM Daniels Tel: 07973 623929/01787 277336 (Suffolk). TRANSMATIC 4” grain auger, 21’ long, single phase. £200. GA Snell Tel: 07970 013288 (Lincs). TRANSMATIC auger 25’x6”, auger 21’x3.5”, auger 16’x3.5”, auger 10’x4.5”, all 3 phase. AJ Sherriff Tel: 01895 832034/07956 559679 (Bucks).

www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 96

19/11/2015 16:25

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138 12C07B

JD 6125R 2013, 2249hrs, AQ, 40K, TLS, cab susp Stk No. 11028821

JD 6130R 2014, 1127hrs, AQ, 40K, TLS, cab susp Stk No.11032662

£46,000

JD 6190R 2014, 1493hrs, AP, 50K, TLS, front linkage Stk No. 31032137

£87,000

£70,000

£63,000

JD 6170R 2014, 843hrs, DD, 50K, TLS, command arm Stk No.71034662

£74,000

JD 8345R 2011, 2370hrs, AP, 50K, ILS Stk No. 21023615

JD C670 2011, eng hrs 470 D hrs 341, harvest smart, prodrive, 625R header, Stk No. 11033088

JD C670i HM 2011, E hrs 851 D hrs 625, harvest mon, 625R header & Zurn rape ext, Stk No. 11035472

JD 960 baler 2012, Maxicut 13 knives, 500/60R22.5 tyres, 540 PTO, 1800 display, Stk No.81032069

Amazone AM sprayer 2007, 3000L tank, 420/85R38, 24m booms 8 sections Stk No. 11035732

Gregoire Besson HRB9 2009, 7f, No.5 bodies, hyd depth wheel, hyd pitch control, susp headstock, Stk No.81036979

JCB 541-70 2009, 4230hrs, 500/70R24 ﬂotation Michelin tyres, Smoothride, 40K trans, Stk No. 11035104

£72,000

£120,000

£15,000

£60,000

JD 6150R 2014, 1024hrs, AQ, 50K, TLS, 650 – 540 tyres Stk No.71032847

JD 6620 2004, 7152hrs, AQ, 40K, TLS, 16.9R24&18.4R38 Stk No. 21035387

Vaderstad VA RD300S 2008, system crossboard disc, wheel pivot press, pre em markers, Stk No. 21023980

JD 6150R 2014, 929hrs, PQ, 40K, TLS, front linkage Stk No.11033894

JD 6210R 2013, 1406hrs, PQ, 40K, TLS, cab susp, Autotrac ready Stk No. 21027669

JD 9880STS 2005, E hrs 2470 D hrs 1750, bullet nose rotor prem chopper, 30’ header, Stk No. 21026609

£18,000

£125,000

Vaderstad VA RDA800S 2013, sys disc Aggressive, support wheels, reinforced tyres, Stk No.11032030

£85,000

Gregoire Besson RWB7 2004, 6f (5+1) variwidth No.8 bodies Stk No.71038921

£4,750

£70,000

£20,000

£17,000

JD 8360R 2014, 1147hrs, AP, 50K, ILS, PUH, Stk No. 11028862

£105,000

£15,000

Buy and sell online – www.farmads.co.uk

£40,000

£28,000

www.tuckwell.co.uk

Prices do not include VAT

HIRE 01728 628325 Mark Debenham 07710 148420

MAULDEN 01525 405848 Gary Buckle 07712 556387

CROMER 01438 861257 Robert Vigus 07712 556389

GROUNDCARE 01206 230283 James Tuckwell 07932 107618

SUDBURY 01787 374100 Ben Chandler 07766 225174

RAYLEIGH 01268 783311 Tim Thornton 07557 922965

DUNMOW 01371 875751 Olwyn Poulson 07710 135644

WORLINGWORTH 01728 628325 Tom Mason 07957 844986

ARDLEIGH 01206 230283 Mark Debenham 07710 148420

December 2015 www.farmads.co.uk 97

farmers_guide_class_december_15.indd 97

18/11/2015 10:46

USED Machinery

end of year

sale

DECEMBER DEAL

tractor clearance

Purchase ANY of these AUTOTRAC Ready Machines before 31st December 2015 and get a NEW StarFire 3000 Dome SF1 + Activation FREE

Now £34,950

Buy and sell online – www.farmads.co.uk

£136,950 11029638 JD 8360RT 2013, 1028hrs, AutoPowr, 40K, 30” tracks, 4SCV, GS3, drawbar, Prem radio

£76,950 11029587 JD 7280R 2012, 2500hrs, AutoPowr, 50K, TLS, 600/70R30 800/70R38 4SCV, PUH

£129,950

£129,950 41035121 JD 8360RT 2013, 2673hrs, AutoPowr 30’’ tracks 60%, Warranty March 2018/5000hrs

£47,950 11034119 JD 7930 2009, 4570hrs, AutoPowr, 50K, TLS, 3SCV, air brakes, active seat, 650/85R38

51034758 JD 8360RT 2013, 1657hrs, AutoPowr, 40K, 30” tracks, 4ESCV, drawbar, twin beacons

£64,950 21031027 JD 7230R 2012, 2034hrs, CQuad, 40K, 710/600/70R30, Fr Link/PTO 4000hr Warranty

£89,950 11029226 JD 7280R 2013, 957hrs, AutoPowr, 40K, HCS, TLS, PUH, 800/70R38 600/70R30

£72,950 31029734 JD 6210R 2012, 2600hrs, AQ, 50K, TLS, HCS, 600/650 80% 4 ESCV,

Now £49,950

Now £24,950

51033246 JD 6150R 2014 2023hrs, DirectDrive, 40K, TLS, HCS, 650/65R38 540/65R28 70% 3SCV, pass seat WAS £52,950

51033247 JD 6150R 2014 1647hrs, DirectDrive, 40K, TLS, HCS, 520/85R38 480/70R28 70%, 3SCV, pass seat WAS £54,950

41034351 JD 8400T 1998 7979hrs, PowerShift, 4SCV, 30” tracks 70%, air seat, A/C WAS £26,950

31034499 CASE PUMA195 2009, 4844hrs, 50K, AutoController, fr/cab sus, 650R42 50% 540R30 50%, fr link/ PTO, 4ESCV, Trimble system WAS £37,950

Now £26,950 11035317 JD 6230 95hp 2008 1641hrs, Standard, PQ, 40K, A/C, 2SCV, 420/85R24, 460/85R38 80%, PUH WAS £28,500

Now £25,950

41032718 JD 6830P 165hp 2010 10055hrs, AutoPowr, 40K, TLS, 650/65 R38 540/65R28 30%, 3SCV, front link WAS £27,500

combine clearance corner Prices Ex-Yard @ Milton Common 11032841 JD 2064 Level Land 1993, 1801 drum hrs, 2328 eng hrs, hydro, chop/chaff, 820 20’ header, trolley WAS £19,950

11030533 JD 9780CTS HillMaster, 2004, 1948 drum hrs, 2722eng hrs, chop/chaff, 25’ header/trolley, yield/moisture, 800/540 WAS £49,950

Now £14,950

Now £44,950

Sales Hotline - 01844 278843 E-mail - sales@farol.co.uk

www.farol.co.uk

Weights NOT included. Prices exclude VAT. Whilst stocks last. Correct 12/11/15

www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 98

18/11/2015 11:34

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

USED Machinery

end of year

sale

31033176 KNIGHT Laser 2005 Trailed sprayer, 3800ltr, 30mtr, 540/65/38 50%, RDS Control, 6 section, steering axle + suspension. Was £18,950

21029952 QUIVOGNE Tinemaster 2001 6mtr, Was £9,500

Now £16,950

Now £7,950 21029066 SIMBA Press 1993 4.6mtr double press, leading tines Was £7,500

Now £6,950

11033657 DOWDESWELL DP7D 5 furrow rev plough, hyd front furrow. Was £2,250

21029953 MOORE Press 2001 6.5mtr double press, good metal Was £4,950

Now £3,950

11034470 WIBERG Cultivator Twose 7mtr, tripple K points, hyd fold, Was £3,450

Now £2,450

Now £6,450

31035279 KUHN GA7501 2011 Twin rotor rake, manual adjust, 7.5mtr Was £7,750

Now £995

Now £6,950

31034871 KUHN GA3201 2004, Single rotor rake, PTO, Was £1,850

51035237 DOWDESWELL DP8B 5 furrow rev plough, 4+1 Was £1,500

41034199 KUHN HR4001 4mtr Power harrow, tooth packer roller Was £1,950

Now £995

Now £1,450

Now £995

4MTR

6MTR

41032548 SIMBA Free Flow 1999, 4mtr tine drill, fr/rear packer, leading tines, hyd PTO fan, RDS box £4,950 Now £3,950

31030578 HORSCH CO4 2004, 4mtr tine drill, cleated tyres, pre em markers, following harrow £9,950 Now £9,450

31027892 HORSCH CO6 2001, 6mtr drill, pre emerg markers, follow harrow, car tyre packer £6,950 Now £6,450

41031058

8MTR 11035533 JOHN DEERE 740A 1998, 8mtr trailed disc drill, Accord metering unit. Was £8,950

Buy and sell online – www.farmads.co.uk

11032584 TEAGLE 8500 2013 Straw feeder/bedder, side chute, trailed, electric control Was £6950

Now £7,950

41035125 RED ROCK Trailer 12T Dropside trailer, sprung drawbar, 385/65 R22.5, twin axle, 2008 Was £3,750

GSD4, Original Brown Box, Combine activation, original starﬁre dome Was £750

Now £2,950

Now £495

Sales Hotline - 01844 278843 E-mail - sales@farol.co.uk

www.farol.co.uk

Weights NOT included. Prices exclude VAT. Whilst stocks last. Correct 12/11/15

December 2015 www.farmads.co.uk 99

farmers_guide_class_december_15.indd 99

18/11/2015 11:35

VENTACROP grain drying fan, no engine, c/w ﬂexitunnel. M Hulme Tel: 01283 812226 (Staffs).

GRASS MACHINERY 2014 Claas Disco 3500, vgc. £7,500+VAT. H Saunders Tel: 07748 140502 (Beds).

BOMFORD B49 hedgecutter, cable control, head & arm ﬂoat, gwo, tidy condition. £2,900. I Watts Tel: 07774 640882 (Glos).

CHAROLAIS & Berrichon ram lambs, lovely stock, ready for work, ideal for ewe lambs. £170 each. K Smith Tel: 01335 330346 (Derbys).

IRRIGATION/ DRAINAGE LMG Agri Drainage Specialists. Services including land drain jetting, yard drain jetting, ditching, trenching & mole draining. For more information email latham@lmgagri.co.uk or call 07545 053667. East Anglia. (T)

FIREWOOD PROCESSORS and LOG SPLITTERS

F22-18B

MCCONNEL axle mounting kit, inc subframe & tractor brackets, 2013, hardly used, comes off PA6570T. £850+VAT. H Saunders Tel: 07748 140502 (Beds).

Single Season for packing quality on the right soil type

Solid Set Sprinklers for all occasions

F24-09B

t: 01302 771881 e: info@wrootwater.com www.wrootwater.com

with operator Suffolk and surrounds call Roger 01284 789241 07712 891763

HEDGING & FORESTRY F22-23B

New saw heads for tracked diggers from 2–20t machines!

Call ALLEN CONNELL on

07922 409140(T)

www.allenconnellmachinery.co.uk

MCCONNEL PA25 hedgecutter, cable control, 3 point linkage, good working order, can be seen working. £1,250 ono no VAT. A Norfolk Tel: 01206 250348/07973 748297 (Essex). MESH type tree guard, 60cm high with square 90cm timber stake, large quantity available, as new, only used for a few months. 20p/ guard. NW Dolby Tel: 07889 700498 (Cambs).

Martin Smith Partnership 01508 530401 LIVESTOCK

GLEBE FARM HEDGING

Serving farmers across the South of England For all your irrigation requirements

Transactions fully insured Contact: Malcolm Evans or Tim Leigh

01763 241222 CHAROLAIS bulls & females, excellent pedigrees & temperaments, haltertrained & ready to work, visitors welcome by appointment. J&J Rix Tel: 07850 796057/01206 262133 (Essex).

Barry Horne

F25-07B

F22-15B

CAISTOR Simmentals ped bulls, polled & non polled by top genetic performance & progeny tested sires from UK, Denmark & Germany, selected for food efﬁciency, growth rate, easy ﬂeshing, temperament & feet, 4yr TB test area, accredited by SAC. B Lundy Tel: 01472 851613/07974 009267 (Lincs).

Briggs Irrigation main distributor

01243 792323

BULK FEEDERS FEED BINS UK WANTED & FOR SALE

4 Collinson 16t, high discharge, good condition FOR SALE

07879 402246 01948 710662 COPE wet plucking machine, 2 man 24” drum unit in working order, tinwork a bit tatty, large pulley cover needs reafﬁxing properly, neither affect running of unit, plucks up to very large capons. £115. T Bush Tel: 07932 183449 (Essex). COTSWOLD dairy equipment water heater, ideal for feeding young stock & washing down, never been used, ring for details. J Cheavins Tel: 07961 634488 (Lincs).

The Hedging Specialists

Over 100 varieties of top quality hedge plants and young trees. For a catalogue, advice or a competitive quote, contact Glebe Farm Hedging Langham, Essex CO4 5PP

Little Hyde Farm, Ingatestone, Essex CM4 0DU

www.dissupplies.co.uk

01277 356881 07754 687983

Open Mon–Fri 8.30am–5.00pm Sat 8.30am–1.00pm

Tel/Fax: 01206 323200

F27-33B

KUHN GA4321 single rotor rake, 2011, gc. £3,750+VAT. H Saunders Tel: 07748 140502 (Beds). KUHN hay spreader, 6 rotor, 6.2m working width, trailed, man fold, old but in good condition, always barn stored. Photos on request. £1,550+VAT. H Hutsby Tel: 07917 130213 (Warks). KUHN Haybob 300, twin rotor, as new, used to do 1.5 acres last year, always stored inside. £1,925+VAT. D Todd Tel: 07768 553833/01462 813390(T) (Beds). LELY Splendimo 2.4 mower conditioner, 2007, very good condition, done very small acreage each year. A Youngman Tel: 07732 042213 (Suffolk). STOLL R420 single rotor rake, 2003, very tidy. £1,500. A Prinold Tel: 07967 145543 (Staffs). VICON KM 240 mower conditioner for parts or repair, suspect a seized internal UJ. £150. C Cannon Tel: 07702 317908 (Herts).

£203,000

Visit www.rightmove.co.uk/ property-for-sale/ property-55547615 for more details or call

FOR HIRE

MOBILE FIREWOOD PROCESSOR

Finished Cattle & Cull Cows

Hard Hose Drip for processing potatoes

email: roger@wfp.uk.com

KVERNELAND FXJ 255 flail topper, 2003, new belts, works very well. £2,250. LD Rich Tel 07774 112211 (Glos) F679

Anglia Quality Meat

WANTED

A deceptively spacious detached country bungalow offering 4 bedroomed accommodation and standing on a plot measuring approximately 60’ x 113’.

01359 244315 www.gaddbrothers.co.uk

For all your agricultural, livestock equipment & accessories

Email: hedge-plants@btconnect.com Website: www.glebefarmhedging.co.uk

NATIONWIDE DELIVERY

F22-02B

Buy and sell online – www.farmads.co.uk

with

GRASS topper in good working condition. £650+VAT. J Furness Tel: 07973 843230 (Glos). KUHN 500 Alterna mower, 5m working width, central pivot, 2005, always stored inside & cleaned. Photos on request. £4,250+VAT. H Hutsby Tel: 07917 130213 (Warks).

F27-58B

Take the right route KUBOTA ZD326 2012 zero-turn mower, 26hp diesel, 60" rear discharge deck, excellent order, only 168hrs, fantastic cutting abilities, any test, c/w 3 new sets of blades. £7,250+VAT. MM Whyberd Tel 07810 855070 (Suffolk) F669

Oak Farm 1 Alburgh Road Hempnall Norfolk NR15 2NPA

F27-12B

GRAIN HANDLING/ STORAGE (cont)

THIRTY 40’ poplar trees felled at Watton, suitable for ﬁrewood or chipping. PE Garner & Son Tel: 01953 881626 (Norfolk). THIRTY-FIVE-YEAR-OLD unthinned plantaion of mixed species, ideal ﬁrewood logs. PE Garner & Son Tel: 01953 881626 (Norfolk).

ION

MENT PLEASE

UIDE G S R E M FAR HEN REPLYING S W NT RTISEME TO ADVE

LINGARDEN land drainjetter, needs replacement pump. Please contact for more details. GW Harrold & Partners Tel 07836 751076 (Norfolk) F684

LAND/PROPERTY GOOD grazing, 3.5 acres, 6 near new 15’x10’ livestock pens & feed store with concrete run outside, water & stable doors, ideal cows/ calves, alpacas, pigs, poultry, ponies etc, adjacent A14 & A11 between Newmarket & Bury St Edmunds. B Gould Tel: 01638 663310 (Suffolk).

CALF dehorning crush. GA Meadows Tel: 01728 660577/07951 848638 (Suffolk). CHAROLAIS bull, pedigree, 18mths old with good weight gain, he has an excellent temperament with good legs & feet, Bury St Edmunds. SC Flack Tel: 07725 201086 (Suffolk).

DEXTER cows with calves at foot, all pure, some pedigree. From £450. SD Hitches Tel: 07726 344144 (Cambs). FEED auger trailer, 4.5t, extensions to hold 6t, twin rocking axle. £1,800. AP Shreeve Tel: 07501 468141 (Norfolk). FOUR Highland heifers from pedigree stock, 2 years old, home bred. C Osborne Tel: 01707 642217 (Herts). FOUR sows in pig - 2 Middle White, 1 Gloucester Old Spot & 1 Gloucester Old Spot X - due soon, 2 Middle White gilts in pig due December. R Lilley Tel: 07740 109294 (Cambs). GLOUCESTER Old Spot weaners (5), ready from 3rd December, 4 boys & 1 girl, birth notiﬁed & can be registered at cost, both parents can be seen. Call for more information. Other GOS stock available. P Robb Tel: 07814 663585 (Essex).

100 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 100

19/11/2015 16:42

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

Ref J1137648

Ref 51138782

Tractors 2010 Case Maxxum 140 8100hrs, Price £27,750

2009 New Holland T6080 RC 7628hrs, Price £26,000 Ref G1137300

Ref 41138436

2013 Case Maxxum 110EP 1000hrs, Price £35,000 Ref K1129152

Ref 31136438

2010 Case Puma CVX225 4423hrs, Price £45,000

2011 New Holland T7.260 4284hrs, Price £41,000 Ref K1136837

Ref 81129404

2012 New Holland T7.270 AC 3407hrs, Price £62,000

2011 Case Puma CVX185 4588hrs, Price £42,000 Ref J1133027

Ref G1128943

2011 Case Puma CVX215 2515hrs, Price £46,000

2011 New Holland T7030 PCSW 3864hrs, Price £41,000

3 Valves-FF-PUH-FW

1163hrs

£28,500

JX80

2DSV-PUH-40K

3533hrs

£21,750

2010 Case

JXU115

2DSV-FF-PUH-40K

4078hrs

£22,000

2013 Case

Maxxum 110EP

3DSV-FF-PUH-Cab/Sus 1000hrs

£35,000

2012 Case

Maxxum 130MC 3DSV-FF-PUH-FS-FW

2010 Case

Maxxum 140

2004 Case

750hrs

£36,500

4DSV-FF-PUH-FS-FW

8100hrs

£27,750

MX285

4DSV-FF-PUH-FS-FW

2800hrs

£27,000

2012 Case

Puma 145EHR

3DSV-FF-PUH-FS-FW

2800hrs

£38,950

2010 Case

Puma 155MHR

4DSV-FF-PUH-FS-FW

3253hrs

£32,000

2011 Case

Puma 180EHR

4DSV-FF-PUH-FS-FW

3500hrs

£42,000

2010 Case

Puma 180MHR

4DSV-40K-P/Shift

4321hrs

£38,250

2009 Case

Puma 210MC

4DSV-FF-PUH-FS-FW

4587hrs

£35,000

2013 Case

Puma CVX145

3DSV-FL-FF-PUH-FS

2180hrs

£51,750

2013 Case

Puma CVX160

4DSV-FF-PUH-FS-FW

1737hrs

£54,000

2011 Case

Puma CVX185

5DSV-FL-FF-PUH-FS

4588hrs

£42,000

2011 Case

Puma CVX215

4DSV-FL-FF-PUH-FS

2515hrs

£46,000

2012 Case

Puma CVX225

4DSV-FL-FF-PUH-FS

1680hrs

£54,000

2010 Case

Puma CVX225

5DSV-FS-FF-PUH-FW

4423hrs

£45,000

2010 Case

Puma CVX225

4DSV-FF-FS-PUH-FW

3500hrs

£45,000

2015 NH

T4.85D

c/w Cab

20hrs

£31,000

2014 NH

T5.105

FF-PUH-Dual Command

124hrs

£35,000

2009 NH

T6080 RC

4DSV-FF-PUH-FS

7628hrs

£26,000

2009 NH

T7030 PC

4DSV-FF-PUH-FS-FW

3588hrs

£36,000

2011 NH

T7030 PCSW

4DSV-FL-FF-FS-PUH

3864hrs

£41,000

2009 NH

T7040 Ultra

4DSV-FF-FS-PUH-AB

3419hrs

£33,000

2010 NH

T7050

4DSV-FL-FF-PUH-FS

4535hrs

£35,750

2010 NH

T7050 PC

4DSV-FF-PUH-FS-FW

4030hrs

£35,000

2011 NH

T7070 AC

4DSV-FF-PUH-FS-FW

3226hrs

£54,000

2011 NH

T7070 AC 1D

4DSV-FL-FF-FS-PUH

3024hrs

£54,000

2012 NH

T7.185 PC

4DSV-FL-FF-PUH-FS

3826hrs

£39,000

2014 NH

T7.210 AC

5DSV-FL-FF-PUH-FS

400hrs

£72,500

2012 NH

T7.235 AC

5DSV-FL-FF-PUH-FS

4303hrs

£54,000

2013 NH

T7.250 PCSW

4DSV-FL-FF-FS-PUH

1195hrs

£64,000

2011 NH

T7.260

5DSV-FL-FF-FS-PUH

4284hrs

£41,000

2014 NH

T7.260 PCSW

5DSV-FL-FF-PUH-FS

1992hrs

£66,000

2012 NH

T7.270 AC

4DSV-FL-FF-PUH-FS

3407hrs

£62,000

2011 NH

T9.560

6DSV-FF-FW-40K

1482hrs £130,000

2006 NH

TZ24D

54” Cutter Deck

184hrs

£8,000

Ref 61127202

Ref 41136941

2009 New Holland T7030 PC 3588hrs, Price £36,000

Farmall 105UE

2012 Case

Buy and sell online – www.farmads.co.uk

2013 New Holland T7.250 PCSW 1195hrs, Price £64,000

2013 Case

2010 Case Puma CVX225 3500hrs, Price £45,000

For further details contact Paul Wylie 01245 380311 or 07836 201571 Rob Hollick 01245 380311 or 07774 499962 Ulting, Maldon, Essex CM9 6QH usedsales@ernestdoe.com

12C08B

December 2015 www.farmads.co.uk 101

farmers_guide_class_december_15.indd 101

18/11/2015 10:48

01245 612019

For the best prices on

BOCM/Pauls sheep & cattle feed

Call John Jewers at

Ashbro

F27-03B

Buy and sell online – www.farmads.co.uk

marriagefeeds.co.uk GLOUCESTERSHIRE Old Spots, for all your needs from weaners through to breeding stock, in pig gilts, meat pigs, one of East Anglia’s largest pedigree free range herd. P Day Tel: 07800 884571 (Cambs). HEREFORD bull, 18mths old, very well bred, proven worker, choice of 2. £1,200. K Smith Tel: 01335 330346 (Derbys). HEREFORD bulls, pedigree, 12-22 mths old. High Health Johnes level 1, BVD, Lepto, IBR & TB free, check our website www.pulhamherefords. co.uk for more details. P Vincent Tel: 01379 676906/07771 697866 (Norfolk). HEREFORD pedigree registered poll bulls, ready to work, high health status Hollowseal Herd. C Winfieldale Tel: 01827 373293/07724 743611 (Derbys).

Feeds

07850 998896

IAE sheep hayracks, on wheels, vgc. A Youngman Tel: 07732 042213 (Suffolk). IAE sheep race, sheeted hurdle race sections, c/w shedding gate & guillotine gate, still in as new condition. A Youngman Tel: 07732 042213 (Suffolk). Very good natured pigs – weaners & breeding stock for sale – Large Black, Oxford Sandy and Blacks Butchery service available If you want to talk pig call Peter Trumpeter 01787 272405 day 07785 947897 eve sales@essexpork.co.uk Essex Also new & used compact tractors, lawn mowers, machinery sales & servicing F27-16A IFOR Williams livestock trailer. £625. PW Andrews Tel: 01438 861747/07961 392079 (Herts). KERRY Hill shearling rams, large sheep, well marked, flock book reg, ready to use. NJ Barrett Tel: 07717 821891/01553 672440 (Norfolk). LAMB creep feeder, IAE, 8’ long. £100. D Pratt Tel: 01986 798330 (Suffolk). LARGE black gilts, choice of six, in pig and maiden, pedigree by Sock Majestic Eagle, Black Lady Ana Jewel, female lines. NJ Barrett Tel: 07717 821891/01553 672440 (Norfolk).

CHEAP CATTLE FEED BARLEY FEED REPLACER

milled on site, can supply various protein levels for your needs Ex or delivered, UFAS reg

Contact Paul Humphrey tel: 01799 599361 mob: 07860 658760

LIMOUSIN X Blue bulling heifers, nice quiet & milky, good looking heifers, BVD vaccinated, TB4 area. S Jaques Tel: 01754 763319 (Lincs). LOHMANN hybrid laying pullets, 25wks old, vaccinated. £7.50 each. Discount for quantity. AJ Ling Tel: 01473 890787 (Suffolk). NINETY Friesian steers, 12-15 months, good condition in open yard. R Booth Tel: 07712 042437 (Lincs). OXFORD Sandy & Black weaners, ready now. RJV Marschalek Tel: 07985 770476 (Suffolk). PEDIGREE Gloucestershire Old Spot weaners, breeding boars & gilts, various ages & store pigs, also Gloucestershire Old Spot X Duroc stock, available now. J Sowter Tel: 07709 608873 (Derbys). PEDIGREE Hereford bull, born Jan 2010, progeny can be seen, excellent temperament. Contact for more details. A Johnson Tel: 01954 230248 (Cambs). PEDIGREE Limousin bull “Claymarsh Jenson” sired by top bull Wilodge Goldcard, naturally grown not pushed, excellent feet & locomotion, easy calving EBVs, standout since a calf, ready for work, contact for more details. H Rutter Tel: 07729 315750 (Lincs). PEDIGREE Poll Hereford show bulls, Eves Hill Lincoln & Eves Hill Lancelot, 19 months, sire Fisher Harro, ready to work, ideal for dairy/beef/pedigree herds, fully accredited Biobest Hihealth herd. J Buxton Tel: 07870 490159 (Norfolk). PEDIGREE reg Simmental stock, inc young working bull & young bulls & heifers, Elite High Health herd, selling due to retirement & ill health. IC Turvey Tel: 07810 633270/01692 406652 (Norfolk). PIG arks. £150. PW Andrews Tel: 01438 861747/07961 392079 (Herts). PIG equipment 14 Adlib poly hoppers 48” long (3 sizes) good condition, approx 50 of 36”x7.75” polyslats, 14 farrowing crates, Medi-gator water medicator, feed barrows, infra red lamps. A Bell Tel: 01205 460268/07720 495007 (Lincs). PIGLET hoppers, various sizes, 10-15 available. N French Tel: 01692 598220 after 6pm (Norfolk).

MACHINERY

FGM F31-01B

Tel: 01263 735912 Mobile 07775 741720

MACHINERY

Team Monoceren applicators for potato planters with brackets .. POA Grays 1t box rotator, c/w JCB brackets ........................... POA Reekie 2 row potato planter, c/w hood ..................................£595 Netagco 5174B 4 web stone & clod separator ...................... POA Netagco bed maker with McConnel 2 leg Shakaerator... POA Reekie 2 bed tiller, c/w ridger .. POA Quantock 2.5m grassland aerator ..................................£2,000 End of season ex hire Micron 6m weedwiper McConnel 9’ topper................ POA Edlington 6m weedwiper, ex hire...................................£1,900 All above + VAT

Fordson Power Major, part respray...........£2,200 (no VAT)

FAST tow bowser, 250 gallon, with spare wheel, £250; two 8’ Cambridge rolls, £150; muck fork 6’7” wide, £350; Agribuggy jacks for sprayer, £250; four 3’ flt harrows, Parmiter. PJ Dudley Tel: 01763 838130 (Essex).

SOUTH WARWICKSHIRE CONTRACTORS

01926 640679

Pegoraro 3m power harrow for spares, good gearbox & rear packer roller......................... £150 Ford Transit van, 1999, SWB, 2L petrol, mechanically very good, drives well, MOT failure for spares ................................. £100 All prices plus VAT

Call Paul De’Ath

• Yes very difficult trading • Secondhand machinery has saturated the market-place

01953 861361/07860 865435

G. BROWN

1978 IH 454 tractor, clean & tidy ....................................... £2,850 1977 Ford 4600 2wd tractor, power steering & grassland wheels & tyres, clean & tidy .. £3,850 Perfect 340 pasture topper, rear roller, hyd side shift ............... £1,495 Quicke 3360E power loader, c/w bracket to fit IH/C-IH 885-4240 XL cab .................................. £1,500 Quicke 3060 power loader to fit IH L cab tractor or old type Zetor... £850 Set of 10 heavy front end weights c/w frame & weight box ........... £345 Pair 13.5x15 tractor front flotation wheels ..................................... £225 Pair 12x28 wheels c/w Goodyear tyres ex MF drill........................ £450 Pair of new fenders to fit IH B250-434 ................................ £350

SOLD

All prices plus VAT

F31-05B

competition alive

• Big may have power but

small is personal & rewarding • Invite me, Nick, on farm to give you a quote for your machinery & spares requirements

Welger RP445 variable baler, no knives .................. £22,500 Lely Splendimo 280MC conditioner.................. £7,695 Lely Hibiscus single rake 455............................. £5,250 Lely Lotus tedder trailed 1020......................... £14,500 Lely Lotus tedder 770 stabilo......................... £7,750 Lely Splendimo 280M mower........................ £6,075 Cousins – great offers on their open day S/H Lely tedder 770, 2012, vgc ............................. £2,250 McConnel hedge trimmer “Special Offers” F28-12A

01354 694701 850212

www.gledhillaccessories.co.uk

MACHINERY HIRE

KONGSKLIDE 22kw motor, 3 phase, 20tph, 63A 4 pin plug, 2m wide, on a trolley, cell wheel drive, standard with switch gear, tidy. £1,250. R Rayner Tel: 07808 066655 (Cambs). NEW Weaving oil seed rape seeder, never been used, all the parts. £1,200+VAT. A Strawson Tel: 07881 684687 (not Sundays) (Suffolk).

H. J. KNIGHT & Son Est. 1850 Chichester, West Sussex

McCormick MC115, c/w loader £11,750 Bomford 477 hedge cutter .......... £2,250 MF 675, 3 stick................................POA Vicon SP461 baler ......................... £995 Major 601 topper ............................ £795 Zetor Proxima 9541, c/w loader £14,500 Kuhn FC 202 mower/cond, mint . £2,350 Fast tow 950L diesel bowsers.... £1,100 Lely Hibiscus twin rotor rake.... £8,500 Krone 5.50/4x7 tedder, choice........POA A/C 707T Classic baler ................. £475 Various Dowdeswell ploughs .........POA

Tel: 01243 575333 www.hjknight.co.uk

exporting is difficult

• Cash-flows are tight • Pick up the phone and keep

Nick 07802

Tel: 01945 700142 or 07774 676440

All + VAT

• Sterling is strong so

T OF SAMPLE OU RS E FF O N SEASO

Cherry Tree Farm • NR16 1PJ

USED MACHINERY SALES

F28-39B

07970 278377

ACCESSORIES

Pallets or Bulk Blown

20t Volvo/Samsung excavator Caterpillar 910 shovel 15t Henley forklift Volvo 5350 dumper Massey Ferguson 1200 Ford 6600 John Deere 855 International crawler/dozer Farmhand F11 loaders Browns 900 loader Matrot 41 beet harvester, 1994, plus various parts MF760 combine complete, for spares, V8 3000 Gallon aluminium artic tank Bedford fire engine Dodge fire engine (V8) Large hydraulic rams – various 225 KVA generator – no engine plus others Workshop lathes (2) large & small Bradbury FKI pillar workshop lift Wheels & tyres – various Engines – various Big 4 in 1 bucket Mobile diesel welder Tractor dump trailer Cat teleporter boom Front mounted grass mowers Renault front axles Flat roll – big Chain harrow frame Bray 4000 shovel for spares Pea straw for feed for sale WANTED – Barn stored barley straw • Concrete & rubble Concrete crushing work undertaken Ring to discuss your requirements

GLEDHILL

QUALITY LIVESTOCK FEEDS

F28-46B

T. M. Matthews

Tractors & scraper boxes available for hire Volvo dumper trucks 1.7 ton to 21 ton diggers ditching work earth moving ponds cleared farm track graded Caterpillar D5 & D6 LGP blades

F00-93B

F27-48B

POLLED Hereford bulls, ready to work 14 to 20mths, 4yr TB, accredited free for IBR, BVD & Johnes level 1 with SAC. R Fowell Tel: 01263 587285/07947 126053 (Norfolk). POLLED pedigree Hereford bulls, 12 to 24mths, 4yr TB, member of SAC herd health & accredited for IBR, BVD & Johnes level 1. R Fowell Tel: 01263 587285/07947 126053 (Norfolk). POULTRY module carrier, standard 12 draw, 8’ long, good condition. SD Hitches Tel: 07726 344144 (Cambs). POULTRY slaughter equipment, single phase stunner, hanging/ cooling rack, ‘W’ shackles, killing cones & butchery equipment. Text for details. SD Hitches Tel: 07726 344144 (Cambs). PURE bred Simmental in-calf cows & heifers. RW Hopkinson Tel: 07976 424263 (Lincs). RED Aberdeen Angus bull, 27mths old, been used this year, recent health test, grass fed. £2,000. P Day Tel: 07800 884571 (Cambs). RED Aberdeen Angus, 4 bulls from Wood Cottage herd, aged 18mths, quiet & easy to handle, Elite Health status, 4yr TB testing, photos available upon request. S Pilch Tel: 01379 741793/07758 841008 (Norfolk). REDPOLL heifers, pedigree registered, variety of ages from 12 to 24mths. RJV Marschalek Tel: 07985 770476 (Suffolk). SHEEP turn over crate, only used a few times, excellent order. A Youngman Tel: 07732 042213 (Suffolk). SIMMENTAL bull, 20mths old, pedigree registered, well grown & very quiet. S Smith Tel: 01538 300200 (Staffs). SIMMENTAL bulls, pedigree registered, 20mths old, well grown & very quiet. S Smith Tel: 01538 300200 (Staffs). SMALL cattle crush, ideal for Dexters. £100. P Coulson Tel: 07774 294751 (Essex). TWO Highland bull calves, 7mths old, can be seen with their mothers in Claydon, good blood lines. Offers in excess of £300 each. B Cowan Tel: 01473 833339/07776 350830 (Suffolk). WM Ironwork sheep turn over crate, only used a few times, excellent order. A Youngman Tel: 07732 042213 (Suffolk).

F31-36A

FEED auger trailer, 4t, 4” blowing in pipe. £1,500. AP Shreeve Tel: 07501 468141 (Norfolk).

LARGE Black weaners from pedigree stock, available from early December. Price from £50 each. LJ Gull Tel: 07795 095397 (Suffolk). LARGE White X Landrace weaners, some ready now & some more end of December to early Jan 2016. POA. T Simpson Tel: 07831 849847 (Beds). LILEY Aberdeen Angus, selection of pedigree bulls available, all performance recorded, semen tested & vaccinated, TB4 area, delivery free to any area. www.lileyangus.com B Marsden Tel: 07767 307044 (S Yorks). LIM X Blue bull, 15mths, good breeding & quiet, BVD vaccinated, TB4 area. S Jaques Tel: 01754 763319 (Lincs). LIM X Blue in calf heifers, quiet & milky, good shapes, BVD vaccinated, TB4 area. S Jaques Tel: 01754 763319 (Lincs).

F27-18B

LIVESTOCK (cont)

Greg Aldridge 07850 278199 Chris Aldridge 07894 338620 PLEASE

MENTIO

DE ERS GUI

FARM LYING HEN REP

W NTS RTISEME TO ADVE

102 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 102

20/11/2015 09:55

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

Patrick Wells

Mob: 07836 385934

Paul Moss

Mob: 07831 552865

Chris Chilvers

Mob: 07796 759332

www.manns.claas-dealer.co.uk

Jon Woolley

Mob: 07710 399899

www.kirby.claas-dealer.co.uk

CLAAS AXION840 £64,000 2013, 50kph, 246hp, 2020 engine hrs, 540/65R30 fronts, 650/65R42 rears CT1116 PW

CLAAS SCORPION 7045 VP+ £37,000 2010, 3063 engine hrs, 500/70R24 fronts, 500/70 R24 rears, JCB carriage CL0015 PW

CLAAS LEXION 600 TT £123,000 2010, 12.00m vario, 2030 engine hrs, 1392 drum hrs, tracks fronts, 500/85R24 rears CL0219 PW

CLAAS ARION 640 CIS 40K £44,300 2012, 40kph, 182hp, 2045 engine hrs, 16.9R28 fronts, 20.8R38 rears CT1153 PW

CLAAS AXION 850 CEBIS £44,000 2010, 264hp, 5750 engine hrs, 540/65R30 fronts, 650/65R42 rears CT1162 PW

CLAAS LEXION 760 £147,000 2012, 9.00m vario, 1075 engine hrs, 834 drum hrs, 900/60R32 fronts, 600/55-22.5 rears CL0479 CC

CLAAS ARION 640 £49,000 2012, 50kph, 177hp, 2497 engine hrs, 540/65R28 fronts, 650/65R38 rears CT1201 JW

CLAAS ARES 697 £26,000 2007, 40kph, 155hp, 3557 engine hrs, 540/65x28 fronts, 650/65x38 rears CT1208 JW

CLAAS LEX600 £128,000 2010, 12.00m vario, 1855 engine hrs, 1502 drum hrs, tracks fronts, 500/85-24 rears CL0480 PW

CLAAS AXION 820 CEBIS £55,580 2012, 50kph, 232hp, 2396 engine hrs, 16.9R30 fronts, 20.8R42 rears CT1237 CC

CLAAS ARION 630 £30,000 2010, 40kph, 150hp, 2830 engine hrs, 16.9R28 fronts, 20.8 R38 rears CT1217 CC

JOHN DEERE 6170R £60,000 2013, 50kph, 175hp, 1688 engine hrs, 600/70R28 fronts, 650/85R38 rears JD0311 PW

CLAAS LEXION 570+ TT £97,000 2009, 7.50 vario, 1625 engine hrs, 1085 drum hrs, tracks fronts, 500/85-24 rears CL0766 PW

CLAAS LEXION 600 TT £123,000 2010, 10.50m vario, 1765 engine hrs, 1410 drum hrs, TT fronts, 500/85R24 rears CL0784 PW

CLAAS AXOS 320 £27,750 2013, 40kph, 87hp, 1202 engine hrs, 340/8524 fronts, 420/8534 rears CT1240 PW

Buy and sell online – www.farmads.co.uk

CLAAS AXION 810 CMATIC £46,000 2010, 50kph, 214hp, 3250 engine hrs, 540/65R30 fronts, 650/65R42 rears CT1064 PW

12C21B

December 2015 www.farmads.co.uk 103

farmers_guide_class_december_15.indd 103

20/11/2015 09:37

RC SETCHFIELD LTD Agriculture

12R16B

Unit 10, Withambrooke Ind Park, Londonthorpe Road, Grantham NG31 9ST Meadows Drive, Irelands Ind Est, Staveley, Nr Chesterfield S43 3LH

Buy and sell online – www.farmads.co.uk

All prices plus VAT

JCB 536-60 Super 13 reg, 3028hrs, 145hp, pin & cone or Manitou carriage, new tyres POA

JCB 531-70 Super 56 reg, hours not known, tyres 40% POA

JCB 525-67 Loadall 5840hrs POA

SANDERSON TL7MT R reg, 4480hrs only, rear hitch, tyres 65%, tidy machine POA

MERLO P33-7KT 54 reg, 8200hrs, rear hitch, Merlo or pin & cone carriage POA

MANITOU 634-120LSU 14 reg, 2706hrs, new radial tyres POA

McCORMICK MC135 08 reg, 1840hrs only, standard spec, front weight POA

NEW/SHOPSOILED RABE PKE3011 3m power harrow, with packer roller & clodboard £7,950

NEW AG PRODUCTS AV175 sand spreader (demo) £3,395

IFOR WILLIAMS 10’ cattle trailer £1,495

IFOR WILLIAMS DP120 de-mount cattle trailer £1,995

BOMFORD B49X MS hedgecutter, linkage mounting, forward arm, manual controls £3,950

McCONNEL PA93 linkage mounted hedgecutter £3,800

TEAGLE 808S straw chopper, cable controls £2,750

ALLMAN Spraymaster 1000L tank, 15m hyd folding booms, elec controls £3,950

Grantham 01476 560784 • Staveley 01246 475315 • www.setchfield.co.uk

Farm Machinery Dealer of the Year

Sales with Service

New & Ex-Demo Clearance Kit

with full manufacturer finance available on selected machines!*

*Subject to terms & conditions Ex-Demo

2015

JOKER CT 3M

2015

£13,250

Pronto 6M Drill

£61,250

£39,750

10ft Ex-Demo

Ex-Demo

Challenger KV FXJ255 KV 2832 F Linkage

£1,750

£6,450

£3,250

listerwilder.co.uk join us Facebook “f ” Logo

RGB / .eps

Facebook “f ” Logo

Auto-reset & Shearbolt models available

Spirit 600S DRILL 4M TopDown

Front Linkage KV Flail Mower KV Front Mower KV Rake

Ex-Demo

New & Ex-Demo

Ex-Demo

Joskin Grass Rake

New

KV 9443

£3,950

RGB / .eps

Joskin 6m Scariflex c/w Roto Electric Seeder

£5,250

New

£43,500

3m Trailed Trio

Ex-Demo

3m Quattro

£24,500

£39,950

Twose

New

MF 1532 Hydro

£11,950

NEW

402 Yard Scraper

£595

Fertiliser Spreaders

KV Plough

New

Ex-Demo

KV Exacta AMAZONE KV LB TL1875 ZAM 3001 85-200

New

4 leg GLS

From £6

,950

Honda

New

TRX 500 FPA

£5,850

Alan Haines 07771 906216 Oliver Down 07771 942992

New

SPECIAL NETT PRICE!

£10,450

Lely

New

Lotus 600 Combi

£6,750

SPECIAL NETT PRICE!

£6,950

Albutt

Ex-Demo

HD Flat 8 Grab

£1,495

5 Furrow £13,450

Bomford

Ex-Demo

Robin EVO 4.3M c/w electric controls

£8,950

SIGN Keep up-to-date

visit listerwilder.co.uk

All prices exclude VAT, E&OE.

104 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 104

18/11/2015 11:51

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

A DOWNING

Startin

AGRICULTURAL ENGINEERS & MACHINERY TRANSPORT X70 Series ex hire tractors Great savings on new prices International 674 tractor......................................POA International 574 1976/77 (R reg), c/w power loader, excellent condition ...............................................POA International 475 1975, immaculate condition .....POA Dieci telehandlers sales & demonstration International BTD6 crawler, ideal restoration project .POA International B434 tractor, vgc ....................... £2,995 1t tail slave forklift, 3 point linkage ﬁtting, low height, ideal orchard or nursery .......................................POA Bonser RT 25 rought terrain forklift, c/w forks, side shift & cab, excellent order ...................................POA

3t 2 wheel tipping trailer, choice ................. from £395 Suton 1.3m power sweeper brush & bucket, suit small tractor ..................................................POA 6cwt fertiliser spreader, as new condition, suit paddocks, small holder etc ...................................POA McConnel PA35 hedgecutter ........................... £3,500 NEW Pegoraro D3000 power harrow c/w clod board, packer roller w/scrapers ................ £6,995 Browns ﬂat 8 bale grab ...................................... £450 Tomlin 4’, 5’ & 6’ toppers in stock NOW AGENTS for SIROMER smallholder tractors from 16–50hp prices start from £3,995+VAT

McCormick X7.660 tractor 165hp ex demo, 50kph, air brakes, creeper gear box, front linkage, 380hrs 5 years 0% ﬁnance Book your

McCormick CVT

r demo

drive tracto

Startin Tractors Limited Twycross CV9 3PW Tel: 01827 880088 sales@startintractors.co.uk www.startintractors.co.uk

All prices + VAT

Case IH JXU 105 c/w Quicke parallel lift loader, Powershuttle 62 reg, only 272hrs

John Deere 6310 Powerquad only 2300hrs, ex airport

Magnum 340 Suspension 50kph regd July 2012, 3011hrs, 710/60x30 Trelleborg 50% & 900/60x38 Trelleborg 60% with full Accuguide

Amazone AD-P 303 Special combination drill

Amazone Catros 3001 disc harrow, wedge ring packer roller

Amazone ZAV 3200 spreader, hopper cover & transport wheels

Amazone 3200 Special 24m Unitrail sprayer

Amazone UF 1501 mounted 24m sprayer

Amazone Cirrus 6003-2 demonstrated this season 2015 build

Horsch Pronto 8 DC 2008, good spec

Kverneland 4m power harrow drill combination

KRM 3m power harrow drill combination c/w packer

Kongskilde Delta 4m 10 leg cultivator, c/w crumble roller

McConnel PA6565T 1.2m or 1.5m head, XTC controls, choice of new or demonstrator

McConnel PA5455 1.2m head, XTC proportional controls, new or demonstrator

McConnel 6570T Revolution controls, 1.5m head, hyd roller, EDS

ﬁn a 0%

LD O S

on M nce X ar d tra 5, X ch efe av cto 6, X 201 rred r 6 *T aila s n L & 6 un &C b o til s a le w X7 pp *

New McCormick X60-40 fwd 110hp, 40kph, A/C & weights 0% 4 years ﬁnance cracking deal to be had

12C05B

GREAT DEALS on all new McCORMICK tractors, loaders and power harrows 0% Finance and individually tailored ﬁnance packages on most products

Buy and sell online – www.farmads.co.uk

NOW!

Carlton Farm, Cattle Dyke, Goreﬁeld, Wisbech, Cambridgeshire PE13 4NN

Tel: 01945 410099 • 07850 731409 www.adowningengineers.co.uk

Reynolds Motors Cromer • Norfolk

12C05A

BEET HARVESTERS TIM & THYREGOD tipping tank and unload on move 2 & 3 row BEET CLEANERS – CTM, JONES & TODD with picking tables and electric start engines BEET DRILLS – STANHAY 592, 6–12 & 18 ROW All fitted with electronic tramlining, etc BEET DRILL – ACCORD MONOPILL 12 ROW hyd fold twin drive very tidy BEET HOES CHOICE OF 6 & 12 ROW HYD FOLD Standen • Stanhay • Houseman & FMA TERRADISC CULTIVATORS 3 & 4M HYD FOLD Cousins and Kongskilde Delta SPRING TINES CHOICE – 3 TO 6M HYD FOLD Dutch & combination harrows 3 to 6 metre KVERNELAND LS 95 5 FURROW PLOUGH on 28 bodies knock on points HYD vari-width KVERNELAND PLOUGH PRESSES 2.4 & 2.7M Lemken 4 furrow reversible plough FLAT LIFTS – SUB SOILERS 2 TO 5 LEG Ransomes Nordsten 3m drill ideal for margins etcl BUNNINGS 6M HYD FOLDING CONTOUR ROLLS AG Dispenser FS 200 with twin rotors for sawdust etc 14T GULL ROOT CROP TRAILER HYD TAILGATE 12T GOOCH & DAVEY TRAILER with hyd tailgate and standard drawbar 10T MARSTON LIFT OFF SIDE TRAILER very versatile, a flat and tipping trailer in one FLAT TRAILER ON AIR BRAKES & SUSPENSION 32’ long timber floor, ideal for potato boxes, etc STAINLESS STEEL WATER BOWSERS 4000 to 15000L, some with pumps, etc WANTED s/beet drills cleaners & trailing tanker harvesters 2 & 3 row

Mob 07836 643155 Tel 01263 833286/1

Check our up to date website with photographs www.startintractors.co.uk * Finance offered subject to terms & conditions

12C47B

December 2015 www.farmads.co.uk 105

farmers_guide_class_december_15.indd 105

20/11/2015 09:42

ROLLER mill & mixer single phase, also Kongskilde drying bin, c/w single phase fan & heater, air sweep ﬂoor. gwo. Howell & Sons Tel: 01760 440297/07798 668239 (Norfolk).

PLOUGHS CONVENTIONAL 2 furrow plough, needs attention. £150. RG Galley Tel: 07799 570384 (Norfolk).

MISCELLANEOUS

UNDER THE WIRE The lost art of aerial crop spraying

ideal for skid steers, other sizes/models available

£12.00 plus postage & packing

01377 259140 www.agriweld.co.uk

F31-31B

MINI ROOT/ CEREAL BUCKET

MANITOU 840-137PS handler, 2012, 1300hrs, excellent condition, great machine. £37,000. G Blandford Tel 07973 424473 (Hereford) F675

TRIMBLE NOMAD hand held computer, running Windows 6 Classic, f/w an internal GPS receiver, in its original box, c/w battery, continental style mains power supply (no 3 pin adapter), some manuals, CD, it does not have Farmworks installed. J Clayton Tel 01480 861824 (Cambs) F665

01526 832 343

sales@agriweld.co.uk

MILL & MIX STEWKLEY MILLING SERVICES Offer Art’s-Way Grinder or Roller Mixers

Good used Secondhand Tractors of most makes always for sale F36-11A

Also Machinery and Implements: Spares, Wheels, Tyres, Loaders, Cabs and Hitches

ATKIN FARM MACHINERY Norwich Road, Dereham

01362 692104/637332 www.atkin-farm-machinery.co.uk

Hydramex Limited www.euroquip.net sales@euroquip.net

JCB Farm Special 525B telescopic, F reg, c/w grab, gwo. £6,750 ono. J Minshull Tel: 01926 513236/07966 511615 (Warks).

Renn & Farm King Bulk Fill - Auger Discharge Roller Mill Mixers. Large stock of Gehl Spares, overnight delivery

FOR SALE: Bulk fill roller mills, from 4tph POA Teagle 8080 bedder, electric controls £3,950 From stock – Ritchie Stock Cube £3,700 nett: when ordered with new crush – buy now, pay January 2016

Martin 07921 921849 (Beds) www.stewkleymilling.com

BOX ROTATORS 5 models available with/without clamping lid

01377 259140 www.agriweld.co.uk

sales@agriweld.co.uk

email: stewkleymilling@btconnect.com

ARTSWAY 6530 Mobile Mill Mix, 18mths old, c/w intake auger, weigh system, straw feeder, molasses tank, 4 screens to mill grains to straw, hammers still not turned, up to 15tph, cost £35,500 when new. £23,000+VAT. S Jones Tel: 07786 366052 (Norfolk).

F29-32B

JCB grain bucket 2.08cu/m, grain use only, still in great condition, selling due to change in farming policy. £800+VAT. C Easter Tel: 07970 987242 (Essex). MCCONNEL Faucheux Prestige 120 loader, 2006, c/w pallet tines, joystick, valves & brackets to ﬁt MF5400 & MF6400 range tractors, vgc. £2,600+VAT ono. CW Smith Tel: 07979 792209 (Leics). PARMITER SGS250 sheargrab, good working order, several new tines, teeth sharp. £225+VAT. RL Maundrell Tel: 07785 568800/01527 854834 (Warks).

FOR FARMERS GUIDE READERS

RY STORE

COUNT ALL IN ONE

F31-10B

Tel: 01280 705202 Fax: 01280 704163 Email: hydramex@hotmail.com

Field Farm, Charlton Road, Evenley, Brackley, Northants, NN13 5GH

BUSINESS FOR SALE

ESTABLISHED MOBILE TOILET HIRE BUSINESS for sale. Sale to include all plant, trading name, website & bookings, 2 luxury trailer units, 16 individual cubicles (Tardis type), 1 accessible cubicle, Renault Master with 300 gallon vacuum tanker, flat bed trailer, plant trailer.

Please call 07768 178642 or email info@countryconveniences.co.uk FRIDGE, 4m x 4.5m x 3m high, ideal for storing meat or game, 2 coolers, 1 hardly used, 3 phase. Offers. N Lee Tel: 01944 738143 (N Yorks). JBLAST Super, shot blast grip, open to offers, possible shot blast equipment including compressor. I Clark Tel: 07718 918400 (Beds).

PLEASE

MENTIO

UIDE ERS G ING FARM LY P E R N S HE W NT RTISEME TO ADVE

DOWDESWELL 5 furrow reversible plough, in furrow, 14”. POA. T Noble Tel: 07816 477293 (Cambs). DOWDESWELL DP2 plough, 10F, 8+1+1, 14” furrows with trashboards. Offers. J Sly Tel: 07971 951505 (Cambs). DOWDESWELL DP7 3+1 reversible plough. £1,895+VAT. J Furness Tel: 07973 843230 (Glos).

MUCK & SLURRY FRASER 450 muck spreader, mechanically sound, barrel needs some attention. Please text as poor signal. W Deaville Tel: 07512 971552 (Derbys).

Redrock 2000 gall

recessed tanker, over the hedge boom, 10,000L pump

GENERAL FARM AND AGRICULTURAL SUPPLIERS OF TRACTOR & WEARING PARTS, HARDWARE, CLOTHING ETC.

Essex

MOBILE MILL & MIX on Volvo lorry, roller mill, hammer mill, sucker blower plus elevator, molasses tank & weigher, good working condition, no VAT. Phone for further details. JG Wickstead Tel 07973 417498 (Shrops) F686

MOBILE MAST & CABIN ideal for on farm communications & GPS, mast extends to 15m, trailer 25' L, 12' H, 8' W, cabin 10' L, 8'6" H, 8' W, galvanised chassis, tandem axle. £6,995+VAT. G Bowser Tel 07721 881234 (Lincs) F676

Call ALLEN CONNELL on

07922 409140(T)

www.allenconnellmachinery.co.uk

FRASER muck spreader, single axle, side discharge type, ideal for small farm, working order. D Walton Tel: 07875 966942 (Lincs). MUCK grab, 4’ wide, new grab tines, Euro 8 brackets, in good order, can be seen working. £500 no VAT. B Clay Tel: 01902 842262/07833 374480 (Staffs).

PEST CONTROL F33-16B

F31-40A

01531 820545

Agricultural Machinery

Longside, Peterhead, Aberdeenshire

F32-10B

Don’t get caught out this winter! 1260mm blade width suit 110x50mm forks

F30-01A

Buy and sell online – www.farmads.co.uk

FORKLIFT/ TELEHANDLER SNOW PLOUGH

F29-21B

Murphy

www.murphyagricultural.co.uk

www.underthewire.co.uk

MATBRO TELERAM 40 1985, same owner last 28 years, good starter, good condition for age, good tyres. GA Stops Tel 07973 392136 (Leics) F690

£5,950 4 furrow CX, auto reset plough, vgc

murphy@murphyagricultural.co.uk

Malcolm Haywood 5 Greenfinch Close • Ruskington Sleaford • Lincolnshire NG34 9GG

ALLBUT man cage/access platform, 4’x5’ approx, ﬁts on pallet tines. £300+VAT ono. CR Shaw Tel: 01782 791231 (Staffs).

2011 Agrolux Overum

01779 821544

info@underthewire.co.uk

F29-31B

F00-109B

MATERIALS HANDLERS

BEST PRICES for

GRAIN FUMIGATION GRAIN STORE TREATMENTS full coverage GRAIN MONITORING and RODENT CONTROL Call

COMMAND PEST CONTROL

01787 248049

www.commandpestcontrol.co.uk BIRD scaring equipment, bangers, clangers, ropes & scary men etc. Prices from £5. A Goodacre Tel: 07901 917707/01476 861672 (Lincs).

KVERNELAND LO 85-300-8 7 furrow (6+1), Build number 167 plough in good working condition, sale due to change of tractor. £9,000+VAT ono. GA Stops Tel 07973 392136 (Leics) F668 GREGOIRE Besson SPEL B9 plough, semi mounted on land plough, 1999, 7+5 furrows, fully automatic, plus various spares. Please contact Phil for full details & price. P Burrows Tel: 07876 443302 (Essex).

KVERNELAND RS 100 semi mounted 5 furrow plough, rear disc, good metal, hyd front furrow, man variwidth. £3,250. LD Rich Tel 07774 112211 (Glos) F680 KVERNELAND complete mid beam mounted depth wheel assembly, came off LD 85/300. Offers. E Clark Tel: 07879 698807 (Norfolk). LEMKEN 5 furrow hyd variwidth with 6th furrow to fit, good order & good metal. £2,000. C Frick Tel: 07774 958613 (Lincs). MASSEY Ferguson 2f plough, good metal, discs & skims. £280 no VAT. JR Swan Tel: 07747 111070 (Essex). RABE Eagle 140C 4+1 reversible plough & press, slatted mouldboards, skimmers, hydraulic push-off arm, vgc, many spares. £2,950+VAT. RL Maundrell Tel: 07785 568800/01527 854834 (Warks). RANSOMES 300S 4f plough, good working order. N Johnson Tel: 07751 588636/01728 628235 (Suffolk).

106 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 106

20/11/2015 10:19

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

Tim Smith

Tel: 01529 303093

Mob: 07730 780510

Richard Sharman Tel: 01777 838888

Mob: 07974 231058

Philip Douce

Mob: 07974 231048

Tel: 01652 651810

www.marsh.claas-dealer.co.uk

Jeremy Preece

Tel: 01845 567407

Mob: 07785 997021

www.seward.claas-dealer.co.uk

CASE IH 2388 £45,000 2002, 6.6m standard cutterbar header, 2391 engine hrs, 1916 drum hrs, 800/65R32 fronts, 480/70R24 rears CI0232

MANITOU MLT 634-120LSU/CRC £25,000 2008, 460/70/24 Manitou carriage, air con, PUH, pallet fork, hyd locking MA0038

CASE IH GEM 1200MD 2002, sprayer

GREGOIRE BESSON SPB9 7+1 2005, semi-mounted plough

CLAAS XERION 3300 TRAC £52,500 2008, 50kph, 330hp, 5188 engine hrs, 710/70R38, 5 spools, front linkage, air con, cab suspension, trailer brake, air brakes CT2051

DOWDESWELL 1700MA 2009, good metal

KEITH RENNIE MACHINERY DZ 1250 £1,950 2004 KR1033

DOWDESWELL DP100S 1995, 3+1+1 5 furrow DD bodies

K2 FRASER MUCK MASTER 850 £5,000 2009, muck/slurry, 550/60R22.5 flotation tyres, light kit, trailer brakes ZZ1484

£10,000 GB0163

CLAAS LEXION 760 TT £239,000 2014, 7.5m vario header, 40kph, tracks, LH laser, dust extractor, air con, yield/Q meter, yield mapping, cruise control, air compressor, power spreader CL6884

CASE IH MAGNUM 310 £33,000 2008, 40kph, 310hp, EGR engine, 5200 engine hrs, 540/65/34 fronts, 710/70/42 rears, 4 spools, front suspension, front linkage, air con CI0238

£1,900 DW0049

CLAAS LEXION 770 TT £159,000 2011, 10.5m vario header, 30kph, 1298E/1045D hrs, LH laser, dust ext, air con, yield/Q meter, yield mapping, telematics, c/control, air compressor, power spreader CL7373

£11,800 DW0048

CLAAS LEXION 740 T4I £148,500 2014, 7.5m vario header, 400E/342D hrs, 800/70R32/500/85R24, RH V/knife, LH laser, header rev, dust ext, A/C, air compressor, engine EGR, straw chopper, chaff spreader, rotor plus variator rotor speed, C motion control lever, local combine sold & serviced by us on Claas warranty from new CL7376

£3,995 CI0234

CLAAS LEXION 580+ TT £162,000 2010, 10.5m vario header, 500/85R24 rears, tracks, laser, yield/Q meter, yield mapping, telematics, air compressor, power spreader CL7355

Buy and sell online – www.farmads.co.uk

CLAAS JAGUAR 820 £29,000 998, 3.0m pick up, 20 blade cylinder, 6480 engine hrs, 5000 cylinder hrs, 4wd, hyd trailer hitch, additive carrier CL7186

CLAAS LEXION 540 £98,450 2010, 6m vario header, 952 engine hrs, 762 drum hrs, 800/65R32 fronts, 600/55R26.5 rears, yield/Q meter CL7386

12C20B

December 2015 www.farmads.co.uk 107

farmers_guide_class_december_15.indd 107

18/11/2015 10:23

JOE TURNER (EQUIPMENT) Ltd Hedgecutters & Flailmowers - Your One Stop Shop New & Secondhand Machinery Rotor Shaft Balancing & Repairs • Large Stock of Parts Firewood Processors & Logsplitters plus much more...

New Bomford Hedgecutters Bomford Hawk 6 Parallel EPP Controls 1.2m or 1.5m Head 6m Reach Bomford Kestrel 5.7 Non Parallel Cable Controls 1.2m Head 5.7m Reach Bomford Kestrel 5.7 Parallel Cable Controls 1.2m Head 5.7m Reach Bomford Kestrel 5.7 Non Parallel Cable Controls 1.2m Head 5.7m Reach Bomford Kestrel 5.7 Non Parallel LPH Controls 1.2m Head 5.7m Reach Bomford Kestrel 5.0 Parallel Cable Control 1.2m Head 5.0m Reach

2010 NH CR9080 Elevation combine 30’ varifeed header, smart steer, tyres 900/60R38 & 540/65R30, engine hrs 1,383 & threshing hrs 1,093

2008 NH CR9080 Elevation combine 30’ varifeed header & trailer, engine hrs 1,669 & threshing hrs 1,273

2008 NH CR9090 Elevation combine 35’ varifeed header, mapping, yield monitor, straw chopper & chaff spreader, 600/65R28, engine hrs 2,400 & threshing hrs 1,800

2009 NH T8050 tractor Ultra Command, Terraglide, 50kph, front linkage & weight pack, tyres 600/70R30 & 800/70R38, hrs 3,395

2014 ex demo NH T8.420 tractor Auto Command, Trelleborg tyres 650/60R34 & 900/60R42, Mega flow pump, dual speed, PTO, nav controller & receiver, hrs 129

2013 NH T6.175 tractor 3 deluxe remote valves, tele mirrors, Terraglide axle, cab suspension, E pack, second rotary beacon, tyres 480/70x28& 600/65x38, weights not inc, hrs 1,200

2006 NH BR740 round baler 2m pick up net & twine, variable chamber, 18,000 bales

Ex demo Dowdeswell 5 furrow plough c/w DDS bodies, manure skims, rear disc & depth wheel

2004 NH BR750 round baler crop cutter with hydraulic rotor reverse bales 22,000

Due in McConnel PA35 Electric Controls 1.1m Head Bomford Falcon 6T Parallel Electric Controls 1.5m Head Bomford Falcon 5.5 Parallel Electric Controls 1.2m Head Bomford Hawk 6 Parallel Electric Controls 1.2m Head Bomford Falcon 6.5T Parallel Electric Controls 1.2m Head

Tel 01789 763958 • Fax 01789 400330 • Mobile 07836 589699 Email: sales@joeturnerequipment.co.uk

0% FINANCE available on selected used combines. Finance is subject to Terms & Conditions

Contact Charles Moorman Mobile 07970 805351 www.plattsharris.co.uk or email us at: sales@plattsharris.co.uk

www.joeturnerequipment.co.uk

Office

12C18B

12C25B

Buy and sell online – www.farmads.co.uk

Secondhand Hedgecutters Bomford Hawk 5.4 Non Parallel ICS Controls Power Slew 1.2m Head Bomford Kestrel 5 Non Parallel Cable Control New 1.2m Pro-Trim Head Bomford B467 Twin Pump Cable Controls 1.25m Head Bomford Falcon 6T Cable Control Turner LR16-84 Cable Control 1.2m Head Bomford B577 Cable Control 1.1m Head Bomford B58-58 Electric Control 1.25m Head Bracket Mounted Bomford B457 1.1m Head Cable Control Spearhead 565 LPH Controls 1.2m Head

01777 870111

12C36B

01473 827060 41C Lady Lane Ind Est, Hadleigh, Suffolk

New MERLO TF38.7 & 42.7 telescopic handlers available now from stock

NEW, SHOPSOILED & EX DEMO MACHINES

Ex demo Deutz-Fahr 6180 TTV Agrotron tractor, c/w f/linkage, PTO, i monitor ..........................................................................POA Merlo TF35.7 120 telescopic handler, A/C, boom suspension, PUH, available from stock .............................................POA Ex-demo Pottinger 5f Servo 45S plough, c/w rear discs........................................................................................................ £17,950 Suzuki Kingquad 500 auto quad, c/w power steering ..... £6,000 Twose TP 600 LH LP hedgecutter, 6m reach, low pressure controls........................................................................................POA Twose TF 500 SLH LP hedgecutter, 5m reach, low pressure controls........................................................................................POA

USED MACHINERY

Deutz 7807 C 2wd tractor, PUH, 3 D/A spools, hyd trailer braking, weights .............................................................................POA Twose TS 525 hedgecutter, 5.25m reach, 2005, cable controls, very good condition ......................................................... £4,500 Pottinger 4030T Synkro stubble cultivator, 2013 build, 4m working width, trailed ............................................................. £15,500 Zaga Volter telescopic hay turner, c/w swath gates ....... .£1,650 Merlo P34.7 plus, telescopic handler, 2007, c/w pickup hitch & boom suspension ........................................................................POA Teagle 8 rotary pasture topper ............................................................POA

Special Deals on all DEUTZ-FAHR & ZETOR tractors – Also POTTINGER ploughs, cultivators and seed drills. 0% financce scheme available – Contact us for details.

Email: sales@bradfarm.co.uk

MACHINERY SALES

USED MACHINERY

Paul Offord

2014 Grimme CS150 Destoner ................ £54,000 c/w One piece share; 5 tined intake rotor; Levelling; Steering; Road kit; HD hydr. Scrubber

Alan Gooch

2012 Grimme CS150 Destoner ................ £39,950 c/w Star adjustment; Hyd. Levelling; Steering axle; Rotapower; Depth control

07831 166183 07747 607604 Roy Spratt

07860 444276 SPARE PARTS SALES

Stephen Morton

07733 320817 All prices are subject to VAT

Please come and visit our spare parts department & showroom

www.bradfarm.co.uk

2011 Grimme CS150 MultiWeb ................ £28,250 c/w Extended hyd. top scrubber web incl. raise/lower; main web under drive; Road kit 2012 CTM Rockstar 1502 Destoner ......... £14,000 c/w 28mm Cross conveyor; Steering axle; Levelling; c. 300hrs from new 2011 Standen Pearson 1500 Unistar ....... £29,000 c/w Vari-flow kit; Variable hyd drive; Scrubber web; Multi-blade share; Agitation 2010 Grimme GL42K 2 Row Belt Planter .. £26,000 c/w Auto depth; Auto hood pressure; Flow board; Auto levelling 2009 Standen Pearson SP200 Planter ....... £7,000 2 row c/w Manual depth control; Shaping hood; Sprocket drive

FINANCE* ON NEW GRIMME SPRING EQUIPMENT Contact your local dealer for details.

All prices are shown excluding VAT.

*Business purposes only, subject to acceptance, terms and conditions apply visit www.grimme.co.uk for details.

To see more quality used machines visit www.grimme.co.uk or contact Glyn Argent on 07946 295197. 108 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 108

19/11/2015 11:21

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

A G R I C U LT U R E

BIG NAMES IN NEW & USED EQUIPMENT

2011 New Holland CSX7070 c/w 20’ verified, smart sieve £80,000

2006 New Holland CX840 c/w 24’ header with hydraulic reel, twin side knives & trailer, 1639 drum hrs, 2200 engine hrs £65,000

New Holland BB9060 packer cutter baler £35,000

New Holland BB950 packer cutter £23,500

2012 New Holland T7.250 Power Command, c/w front linkage, PTO, Sidewinder, 50kph, immaculate condition £54,000

2012 New Holland T7.260 Power Command, c/w front linkage, full TRK guidance, 710/60R42 wheels at 30%, immaculate condition £45,000

2014 New Holland T6.150 c/w Quicke loader, 40k front suspension, fully serviced, 1100hrs, immaculate condition £39,000

2011 New Holland T6030 50kph, c/w new tyres, loader brackets £36,500

New Holland T7040 – Choice of 2 2011 50kph, 5250hrs £32,000 2008 Power Command, 40kph, c/w f/linkage & PTO, 6000hrs, new tyres, good condition £31,500

2015 Case IH Puma CVX 200 ex hire, 50kph, 420hrs, front linkage, finance & warranty £79,800

2013 Case IH Puma CVX 160 50kph, c/w front linkage, 4 spool valves, 1850hrs, very tidy condition £53,000 12C17B

Sales Hotline: 01373 465941 (Mon-Fri 08.00-17.00) Out of hours: 07710 895957 New: www.thwhite.co.uk Used: www.thwhiteagriculture.co.uk

Thurlow Nunn Standen Ltd

“Leaders in every field”

East Anglia’s first choice for new and used Challenger, Fendt and Massey Ferguson

Call 07798 585609 / 07798 585624 • enquiry@tnsgroup.co.uk EX HIRE & EX DEMO Fendt 514 ex hire, 2013, 2809hrs, 31037604 ........£62,500 Fendt 514 ex hire, 2013, 2030hrs, 31037605 ........£62,500 Fendt 514 ex hire, 2014, 2429hrs, 31037607 ........£62,500 Fendt 724 ex demo, 2015, 31039688 ......................... POA Fendt 724 ex demo, 2015, 50hrs, 51039683 .............. POA Fendt 724 ex demo, 2015, 381hrs, 61039662 ............ POA Fendt 936 ex demo, 2015, 221hrs, 21039746 ............ POA MF7618 ex hire, 2014, 580hrs, 21038432..............£49,995 MF7370 ex demo, 308hrs, 11037248 .......................... POA MF5612 ex demo, 2014, 154hrs, 41038982................ POA MF6616 ex demo, 2015, 81hrs, 31039853.................. POA MF7618 ex demo, 2015, 49hrs, 11039852 .................. POA MF7618 ex hire, 2015, 397hrs, 31039855..............£57,500 MF7618 ex hire, 2015, 545hrs, 31039856..............£57,500 MF7618 2015, ex hire, 444hrs, 31039857..............£57,500 MF7618 2015, ex hire, 435hrs, 31039858..............£57,500 MF7618 2015, ex hire, 413hrs, 31039859..............£57,500 MF7718 ex demo, 2015, 103hrs, 31040210................ POA MF7720 ex demo 2015, 152hrs, 31039850................. POA MF7726 ex demo, 2015, 45hrs, 31039849.................. POA MF7726 ex demo, 2015, 289hrs, 51039848................ POA MF8737 ex demo, 2014, 513hrs, 31038319................ POA

TRACTORS Challenger MT765B 2008, 5468hrs, 21039360 ....£69,500 Challenger MT765B 2007, 7487hrs, 11040571 ....£59,500 Challenger MT765C 2009, 4084hrs, 21040283 ....£81,500 Challenger MT765C 2011, 4380hrs, 31040345 ....£99,500 Challenger MT765C 2009, 4593hrs, 31038032 ....£79,500 Challenger MT765C 2011, 4111hrs, 11038381 .....£97,500

Challenger MT765C 2012, 2905hrs, 41039735 ..£117,500 Challenger MT765C 2010, 4247hrs, 31040250 ....£92,500 Challenger MT765D 2014, 923hrs, 31037410 ....£155,000 Challenger MT765D 2013, 2219hrs, 11040085 ..£129,750 Challenger MT845 2004, 5337hrs, 31040505 .......£69,500 Challenger MT845C 2012, 6127hrs, 31040035 ..£139,500 Challenger MT865C 2012, 5835hrs, 31040248 ..£155,000 Fendt 722 2011, 3000hrs, 21039202 .....................£79,500 Fendt 724 2011, 3144hrs, 31039410 .....................£77,950 Fendt 724 2012, 2958hrs, 31037323 .....................£79,000 Fendt 828 2011, 5000hrs, 61040983 .......................... POA Fendt 939 2011, 3692hrs, 61038854 .....................£89,000 MF6499 2007, 8300hrs, 21040989 ............................. POA MF7626 2014, 11040852............................................. POA MF7618 2014, 520hrs, 11040495...........................£55,000 MF7619 2012, 4036hrs, 31038826 ........................£42,500 MF7619 2013, 1842hrs, 51040091 ........................£53,995 MF7624 2012, 1800hrs, 11040066.........................£55,000 MF8660 2011, 3592hrs, 41038552.........................£57,500

HANDLERS MF9407 2400hrs, 21040660 ..................................£34,000 MF9205 2012, 3000hrs, 31040004 ........................£27,000

SPRAYERS RoGator RG645A 2011, 41038689........................£98,000 RoGator RG655 2012, 31040183 ........................£145,000 John Deere 8401 31040885 ..................................£17,000

HARVESTING MF7274 2007, 1900hrs, 21039190 ........................£60,000 MF7274 2003, 2008, 1170hrs, 11039754 ...............£75,000

See our website for the full stock list 112C41B

Thurlow Nunn Standen Ltd offer finance through their preferred funder, AGCO Finance Ltd, and is for business to business lending only. Applicants must be 18 years of age or older and resident in the UK.

MF7370 2014, 310hrs, 11037248................................ POA MF7370 2012, 31039232 .....................................£115,000 MF40RS 3064hrs, 31040866 .................................£18,000 New Holland BB9090 51040161 ...........................£47,500 New Holland BB980 51039167 .............................£18,500

CULTIVATION Kverneland LO85/300 11040859 ..........................£18,000 Kverneland LS95-160 61040926 ............................£4,950 Cousins subsoiler & disc, 51040647 .......................£7,000 He-Va Combilift legs (7), 51039205 ........................£1,260

Buy and sell online – www.farmads.co.uk

2011 New Holland CR9080 c/w 35’ varifeed, chopper chaff spreader, yield monitor, smart steer, 960 threshing hrs, 1313 engine hrs £125,000

DRILLS Kverneland S drill, 11038408 ..................................£9,950 Kverneland Miniair 51039538 ................................£7,500 Monosem Precision 51039537...............................£6,950

POTATO EQUIPMENT Grimme GT170S 51037483.................................£122,000 Grimme GT170S 51039557...................................£59,950 Grimme GT170S 51040769...................................£49,995 Grimme Combi Star 51040449 .............................£14,000 Grimme Combi Star 51040451 .............................£14,000 Grimme Combi Star 51040454 .............................£14,000 Grimme CW170 51035535 ....................................£10,500 Grimme GZ1700 51040746 ...................................£14,950 Grimme KSA1500 51039022 ..................................£2,250

MISCELLANEOUS CFX RTK 51040405 .................................................£5,500 FMX RTK 31040586...............................................£13,500 RTV900 1275hrs, 61040982 ....................................... POA Votex PT3/300 11040544 .........................................£1,950

www.tnsgroup.co.uk

Prices do not include VAT or shipping

December 2015 www.farmads.co.uk 109

farmers_guide_class_december_15.indd 109

18/11/2015 12:32

Samon onion toppers & 60” windrowers • Top lifting harvesters – DeWulf, Simon, Asa-Lift • 2, 3, 4ft screen/roller graders • Hoppers, brushes, elevators, box ﬁllers/tippers, toppers etc • Grimme DL1500/QC harvesters • Cash paid

Electrical & Mechanical Engineers

USED MACHI NERY Bijlsma palletiser with pallet dispenser & roller lanes, due in Jan 2016

F34-31B

Propack double head belt weigher Twin cell ABB robot due in March 2016

Retribution Stitcher System with

Absolute Bag Control

PG GRASS SEEDS (Sinclair McGill)

Agricultural, equestrian, landscaping and sports grass seed mixtures Game cover seeds Drilling service available

nick@herbert&sons.net

STOCKFEED POTATOES WANTED FOR CATTLE FEED PROMPT PAYMENT ASSURED

Please call Nick Herbert

01371 822181 07791 131911

07512 821421

Or email lukaszteo@gmail.com

Herbert Box Tipper, inc cross belt

SEED

Herbert & Sons

Call Lukasz on

Triple piggy back store conveyors, 700 wide

FARM Electronics 30kW refrigeration plant from 450t store, installed 2001, Maneurop oil, excellent condition. £6,900. I Metson Tel: 07791 029380/01279 876215 (Essex).

OCTAGON

Tel: 01832 710814 Mobile: 07802 620138 BULK seed bags, 500kg, new 2015, used once. P Buckenham Tel: 07770 797846/01268 416875 (Essex).

TONG conveyor, 3 phase, 10’x2’, with reversible switch & mounted on 4 adjustable legs with wheels, always used & stored under cover, excellent belt & working condition. £200. E Holland Tel: 07799 085863 (Cambs)

01354 638222

info@agrimech.co.uk www.agrimech.co.uk DOWNS potato elevator, 35’Lx 2’W, 3ph, can be seen working. £2,500 ovno. B Clay Tel: 01902 842262/07833 374480 (Staffs).

www.cropstorage.co.uk

CRANFORD conveyor, single phase, 20’x1’6”, mounted on 4 handle adjustable legs with wheels, always used & stored under cover, excellent belt & working condition. £200. E Holland Tel: 07799 085863 (Cambs).

BLACKBURN CHITTING CRATES

POTATO EQUIPMENT USED & REBUILT

• Tong Caretaker Compact 1800 fully rebuilt, fitted with new Evolution cleaner and all new belts and electrics • Tong Dry Buster 600mm x 2.7m 3 phase fixed speed • Herbert 2400 Grader comprising hopper Galaxy cleaner, 8’ screen and large picking table with canopy • New Tong Midi Box Fillers with doorstop belt and variable speed available from stock • New Sack Co TI060 10tph Weigher • Herbert Barrel Washers various • Downs Bloodhound and Harrier Telescopic Elevators • Downs Spacemaker Dual Conveyors 2 x 10m with road wheels and drawbar • New Oldenhuis and Prinsen Palletiser available from stock in November • Roller Inspection Tables various widths and lengths UK agents for Pro-Pak weighing equipment, Oldenhuis & Prinsen & Symach palletisers

UR CHECK OUT OTE SI EB W NEW

Pellcroft Engineering Ltd Coningsby, Lincs

01526 342466 GRADING machine, single screen, from 25mm up to 60mm screens with 2’ wide roller table, 3 phase electric motor, ready for work, barn stored. £1,000 ono. R Emery Tel: 07973 532989 (Beds).

POTATO CHITTING LIGHTS FOR SALE F34-23B

• size range from 6'–12' • free standing or hanging • now oﬀering LED option

01621 828689(T)

F34-03B

info@kjengineering.com

sales@davidharrisons.com www.davidharrisons.com

01353 740666

GRIMME Tornado 85 destoner, put away all working, barn stored, it runs a treat, we have a few spares including one brand new middle web, front web only did one season! Photos on request. £800+VAT. H Hutsby Tel: 07917 130213 (Warks). WOODEN chitting trays, approx 1500. 20p each. TD Horsnell Tel: 07768 936259 (Essex).

F34-19A

KONGSKILDE shop-soiled front seed/fertiliser hopper, c/w pipework & fan. Please contact for more details. GW Harrold & Partners Tel 07836 751076 (Norfolk) F683

SPARE PARTS

Tel: 028 9127 5913 Email: info@agri-web.co.uk

. WALTHAMBURY automatic ﬁxed head stitching line, good working order, 3 phase wooden slatted track. £1,200 ono. N Evans Tel: 07966 533015 (Shrops).

BISO side knives with John Deere 625 brackets control box & wiring look. £300. J Ridley Tel: 07850 138851 (Beds).

FLAILS DIRECT .CO.UK

QUALITY FLAILS

PUMPS

To suit most flail mowers and hedge cutters at competitive prices Tel: 01427 718561 Fax: 01427 718016 Mob: 07801 980212

GRUNFOS 4” borehole pump or pond pump, c/w electric starter box & cable pumps, 88206 imp galls/min, little use, dry stored. £2,900 ono. R Emery Tel: 07973 532989 (Beds). WICKHAM diaphragm pump with 2” inlet & 3” outlet, Villiers engine, working when last used. £35. JR Swan Tel: 07747 111070 (Essex).

REPAIRS, SERVICING & MAINTENANCE

AGRICULTURAL MACHINERY MAINTENANCE ENGINEER

E-mail: sales@flailsdirect.co.uk Website: www.flailsdirect.co.uk

City & Guilds of London Institute Certificates of Competance 25 years experience with Eastern Block machinery Skandinavian agricultural/ forestry products and West German engineering based machinery Competitive labour rates subject to customer acceptance of company working policy

07824 600667 Chelmsford

Buy and sell online

www.farmads.co.uk

F33-05A

Passionate about machinery automation, completely dedicated to customer service

01327 877100

F00-60B

BAG STITCHER SYSTEMS WEIGHING & PALLETISING EQUIPMENT GRADING & HANDLING EQUIPMENT PLC PROGRAMMING SERVICE & REPAIRS

FANS GAS HEATERS LOUVRES TEMPERATURE & HUMIDITY CONTROL SYSTEMS

REDUCE HARVESTING DAMAGE WITH RUBBER WEB COVERS QUICKSPLICE WEB JOINERS RUBBER GRADING SCREENS PERFORATED RUBBER WASHER BELTS

Blue Bridge Engineering Ltd

CROP DRYING & COOLING PRODUCTS

F34-25B

PRODUCTS LTD

F34-27B

Buy and sell online – www.farmads.co.uk

By Teo Lukasz Teodorczyk

F34-14B

F34-17A

AGRIMECH SERVICES

STANDEN SF2 2 row potato planter, 2010, only 200 acres worked, shaping hood, stainless steel openers, hydraulic cup drive, Team Amistar sprayer, excellent condition. £8,000. TD Horsnell Tel: 07769 936259 (Essex).

F37-01B

WANTED FOR EXPORT

POTATO EQUIPMENT

Also flail mowers for tractors and excavators from 15 to 200HP

(Flails direct is a division of Engineering and Hire Ltd)

BOMFORD C4418 front loader lift arms/rams (2), one Bomford C4418 tilt ram. £100+VAT each. C Cornish Tel: 07880 976137 (Suffolk). BRAND new back removable mud gaurds for Case JXU tractor. Offers. C Cornish Tel: 07880 976137 (Suffolk). BREAKING for spares, Ransomes 300S plough, all parts available. N Johnson Tel: 07751 588636/01728 628235 (Suffolk). REKORD mini round baler spares rollers, bearings & chains. Offers. GR Walton Tel: 07860 826033/01359 230049 (Suffolk). REKORD mini round baler spares, rollers, bearings & chains, offers. GR Walton Tel: 07702 954299/07860 826033/01359 230049 (Suffolk). SCHARMUELLER ball hitch for Claas 600 or Massey 64/74, Bill Bennett drawbar, Massey drawbar. Offers. P Hird Tel: 07703 438589 (Cumbria). SPARES for Cambridge rolls, 22” rings, shafts & bearing blocks. N Johnson Tel: 07751 588636/01728 628235 (Suffolk).

110 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 110

20/11/2015 10:43

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

BOSTON • LINCOLNSHIRE

Call Carrington on 01205 480460 / 07778 372606

NEW, USED & HIRE MACHINERY

Call Sutterton on 01205 460600 / 07768 119605

• AND STRIPE AGRICULTURE • NEW KUBOTA M110GX 4WD TRACTOR Reference Number: 191524 40k transmission with creeper *0% FINANCE AVAILABLE*

EX DEMO KUBOTA MX135 4WD Reference Number: 191620 40 KPH, creep speed, front suspension, passenger seat *0% FINANCE AVAILABLE*

EX HIRE JCB 531-70 AGRI SUPER TELEHANDLER Reference Number: 191649 2878 hours, 40k 6-speed transmission, boom suspension

BAILEY 14 TONNE MONO TRAILER Reference Number: 191789 1998 ,hydraulic door with grain chute,sprung drawbar,roll over sheet

BAILEY 14T ROOT EX HIRE TRAILER (2014) Reference Number: 191672 c/w Sprung draw bar, grain chute, mud guards with flaps, LED lights

BAILEY WATER BOWSER C/W 13000 LITRE STAINLESS STEEL TANK, Reference Number: 191859 Insulated tank, Compartments, Internal Cleaning System

EX DEMO BAILEY CURTAIN SIDED PALLET TRAILER 29’ LONG. HIGH SPEED AXLES SPECIAL OFFER Reference Number: 91238 c/w chequer plate floor, rear beacon

IFOR WILLIAMS 14’ TRI AXLE CATTLE BOX TRAILER Reference Number: 191787 c/w large cross division *0% FINANCE AVAILABLE*

KUHN 4M HR4003D 2007 POWER HARROW COMBINATION. Reference Number: 191689 c/w 2010 Accord combination drill *0% FINANCE AVAILABLE*

EX DEMO HORSCH SPRINTER 4 ST Reference Number: 191874 2015 c/w e-manager, multi grip tines, duett coulter, bout markers *0% FINANCE AVAILABLE*

2012 LEMKEN SOLITAIR 9 3M DRILL and ZIRKON 10/300 P/HARROW Reference Number: 191780 150mm coulters spacing *0% FINANCE AVAILABLE*

USED SIMBA HORSCH CO6 DRILL Reference Number: 91347 2004, 6m working width, 3 row harrow coulters, rear tyre packer, *0% FINANCE AVAILABLE*

EX DEMO/HIRE KVERNELAND NG35 POWER HARROW Reference Number: 191664 hydraulic folding 4m, 5m or 6m *0% FINANCE AVAILABLE*

SWIFTLIFT 140X ELEVATOR USED Reference Number: 191818 c/w 600mm wide belt, slewing platform, raised platform, circular hopper, power transmission

HORSCH 3M JOKER EX DEMO Reference Number: 191805 Double Disc, TG Bar, Steel Disc Packer *0% FINANCE AVAILABLE*

LEMKEN JUWEL 8 5+1 PLOUGH Reference Number: 191842 2011 c/w Manual vari width, W52 bodies, skimmers *0% FINANCE AVAILABLE*

KVERNELAND LO85/300 6+1 7 FURROW PLOUGH Reference Number: 191882 2006 fully mounted plough, hydraulic vari-width, skimmers

GREGOIRE BESSON RB7 4 FURROW PLOUGH Reference Number: 191743 1996, No 8 bodies, rear depth wheel *0% FINANCE AVAILABLE*

KVERNELAND RB100 PLOUGH Reference Number: 191793 2009 Kverneland RB100 semi mounted plough, 8 furrow *0% FINANCE AVAILABLE*

GREGOIRE BESSON HRPB7 6 FURROW FULLY MOUNTED PLOUGH Reference Number: 191857 2002, manual width adjustment, *0% FINANCE AVAILABLE*

2012 DOWDSWELL 105MA SERIES 5 FURROW Reference Number: 191711 c/w 5 furrow(4+1) DDs bodies *0% FINANCE AVAILABLE*

SPEARHEAD TWIGA 470 4.7M REACH Reference Number: 191807 Three Point Linkage Mounted, 60HP Tractor, Cable Controls, T Flail

2015 EX DEMO SPEARHEAD 655-T REACH MOWER Reference Number: 191829 c/w Hydraulic proportional controls, hydraulic rear roller, 3 point linkage

NEW SPEARHEAD TWIGA 600 6M REACH MOWER Reference Number: 3051 3 point linkage mounted, parallel arm geometry, hydraulic slew

2013 CONCEPT 220 OFFSET FLAIL MOWER Reference Number: 191799 c/w 2.2m cutting width, hammer flails, left hand and right hand offset

NEW BIG CUTTER 6M PROFESSIONAL REAR MOUNT HYDRAULIC FOLDING FLAIL MOWER Reference Number: 3162 hammer blades, auto belt tightener

USED SPEARHEAD 460 MULTICUT Reference Number: 191858 2007, 4.6m working width, rear transport and height control wheels, hydraulic folding

Buy and sell online – www.farmads.co.uk

JOHN DEERE 8285R (2013) Reference Number: 191722 c/w 40kph power shift,r, 650/85R38 rears 75%, 600/70R30 fronts 60%, weight block not included

email: jonathan@irelandsfarmmachinery.co.uk • email: darren@irelandsfarmmachinery.co.uk • website: www.irelandsfarmmachinery.co.uk *0% Finance available for buisness use only- according to terms and conditions and acceptance. This may change at anytime without prior notice. VAT charged at the current UK rate at time of acceptance*

December 2015 www.farmads.co.uk 111

farmers_guide_class_december_15.indd 111

18/11/2015 11:48

Proforge Inverta™ 6m Inverta™.......£18,450

Buy and sell online – www.farmads.co.uk

front levelling boards extra

• Large class-leading 560mm (22”) cutaway discs • Choice of Steel DiscBond™ Packer, or Rubber Wedge Packer at same price • Choice of 6 widths: 2.7 m, 3.0m, 4.0m, 4.5m, 5.0m and 6.0m • All trailed machines can be also used fully mounted, for versatility • Optional front hydraulic levelling boards • Mounted Models: 2.7m – £7,150, 3.0m – £7,350, 4.0m folding – £10,650, 4.5m folding – £11,950, 5.0m folding – £13,250, 6.0m folding – £15,300 • Trailed Models: 3.0m – £10,300, 4.0m folding – £13,800, 4.5m folding – £15,100, 5.0m folding – £16,400, 6.0m folding – £18,450

Proforge Disrupta™ • 3 metre • 7 tine auto-reset stubble cultivator • steel DiscBond packer • common wearing parts • superb one-pass min-till cultivation to 100-200mm depth • can be pulled with 120hp tractor

£5,950+VAT Moledrainer MonoMole mounted ................................£5,450.00 MonoMole single leg trailed ..................£6,450.00 MultiMole twin leg trailed .....................£12,650.00 (can be used as a single leg machine)

All models benefit from...

■ the proven large diameter disc ■ MonoSkid under-beam replaceable wear plate ■ leg pitch adjustment

Edenham, Bourne, Lincs, PE10 0LN

email: machinery@agri-linc.com

www.agri-linc.com

01778 591225 12C51B

112 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 112

18/11/2015 12:34

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

www.agri-linc.com CLAYDON

HORSCH

AMAZONE CIRRUS 4000 4m trailed seed drill, 2004, all new cultivation and Rotec drilling discs, new following harrow, etc £12,950

CLAYDON 6m folding trailed V drill 19 coulter, Sulky metering £14,750

HORSCH CO4 trailed tine drill, Accord metering, very good example, tramliner, following harrow £8,250

HORSCH

KOCKERLING

HORSCH PRONTO DC 6m 2009, just arrived, wheel eradicators, pre-emergence markers £29,950

HORSCH PRONTO DS trailed 3m grain & fertiliser, 20 double disc coulter, level board, radar metering, pre-em markers £8,950

KOCKERLING AT400 4m tine seeder, 2001, pre-emergence markers, front press wheels, rear Rollﬂex packer £5,850

KUHN

MOORE

SIMBA

KUHN 3m SD3000 direct drill 18 row, 2000, double disc, front cultivation discs, rear harrow £12,950

MOORE UNIDRILL 6m trailed direct drill, 1998, Accord metering system £8,850

SIMBA FREEFLOW 8m trailed drill, wire rope scrapers, Lombardi electric start engine for fan £6,950

VADERSTAD

VADERSTAD RAPID 300XL 2006, system disc, 3m, staggered wheels, 390mm discs, drawbar packer, hydraulic discs, 1470 hectares, excellent £16,450

VADERSTAD RAPID 500P System disc, 5m (or 4.8m) cleated tyres, excellent wearing parts, pre-emergence markers £9,850

VADERSTAD RAPID 600F System disc, 6m, pre-em markers, new cleated tyres and following harrow, 15” drilling discs, 14.5” system disc, vgc £17,950

VADERSTAD

Buy and sell online – www.farmads.co.uk

AMAZONE

VADERSTAD RAPID A400S 2008, System disc, 3135 hectares, new discs all round, new coulters, new cleated tyres and following harrow £29,950

VIEW MORE MACHINERY IN OUR GALLERY:

VADERSTAD SPIRIT 400S 2009, System disc, tramlines, radar metering, pre-em markers, 2431 hectares, very clean, new system discs ﬁtted £25,750

www.agri-linc.com

BUY NOW PAY WHEN YOU CAN Finance for up to 4 years on NEW and USED machinery

12C52B

01778 591 225 (subject to status)

0% for 2 years • 1% for 3 years • 2% for 4 years December 2015 www.farmads.co.uk 113

farmers_guide_class_december_15.indd 113

19/11/2015 11:15

Grain & Precision Drills

Berthoud • Househam • Hardi and most other makes Hypro • Teejet • Lechler Altek • RDS • Dual Pumps Enduramaxx Tanks/Sprayers

ON FARM REPAIRS AND

Balers & Wrappers Mowers & Foragers

Tel: 01789 731365 www.dkelectronics.co.uk

SPRAYERS

Stowmarket, Suffolk IP14 3DP F39-04B

GM-R trailed tracker sprayer, 2600L, 12/24m, 2005, RDS Chaviot 2000, 24m, 2 sets wheels Landquip 3200, 12/24m, trailed, 2007 Househam AR 3000, 24m 58 reg, serviced and full NSTS Gem Sapphire,1997, 3000L, 24m, 2 sets wheels Knight trailed tracker, 2500 12/24m, 2003, 2 sets wheels Knight Anglia, 3000L, 24m trailed tracker, 2002 Gem 1000L mounted, 24m, c/w front 1000L tank Rau Expert 1O00L, 20m, 2006 GM-R 3200, 24 or 30m trailed auto steering axle New replacement steel booms fitted at our works

We wish all our customers a happy Christmas and prosperous new year

More sprayers on www.gm-rsprayers.co.uk All offered subject to remaining unsold CONTACTS

Graham Mitchell-Rowlands 07860 618903 01449 737482 Technical Support: 07730 679304 Admin: Sue 01449 736300 Gail: 01449 737482 For�your�new�self-propelled, trailed�or�mounted�crop�sprayer�go�to

www.gm-rsprayers.co.uk

ARAG bout marker, complete kit for 24m boom, as new, still in box. £380+VAT ono. Blenheim Agri Services Tel: 07813 764785 (Notts). BERTHOUD Mack 12, 20m, 1200L mounted sprayer, 5 section boom control, quad nozzle holders, new MOT, very tidy straight sprayer. £3,500. A Brown Tel: 07850 936135 (W Mids). BERTHOUD Mack 15, 24m booms, 1500L tank, triple nozzles, in cab electric controls, induction hopper & clean water tank, in good condition, MOT until June 2016. £2,500+VAT. ME Millbank Tel: 07879 633917/01279 724901 (Herts).

Tel: 01279 812727

spraytecltd@btinernet.com

www.spraytecltd.co.uk AIRTEC compressor from a 24m Cleanacres sprayer, vgc. £200 ono. Blenheim Agri Services Tel: 07813 764785 (Notts). GEM 1000L mounted Slimline, 12/15m hyd boom, induction hopper, Gemtronic ﬂow controller, in cab electrics, MOT. £1,550+VAT. PE Beales Tel: 01284 828360/07584 189359 (Suffolk).

YOUR LOCAL SPECIALIST SPRAYER COMPANY

Fully trained sprayer service engineers at your disposal for NSTS, routine servicing & breakdowns. Vast stocks of spare parts for all makes to keep your sprayer on the move.

murphy@murphyagricultural.co.uk

www.murphyagricultural.co.uk Longside, Peterhead, Aberdeenshire

KNIGHT 3000L 24m trailed, tracking drawbar, RDS controller, new MOT, 2 sets of wheels, vgc. £6,400 I Brand Tel: 07899 795220 (Lincs).

A G R I S P R A Y L T D

AGRICULTURAL SPRAYERS SALES-SERVICE SPARES

WILLMOT Lightspray 24m, rowcrop & LGP tyres, 4892hrs, used regularly, in working order, owner retiring. £2,500 ono. HA Robinson Tel: 01964 536699 (E Yorks).

WE NOW SUPPLY THE DEFY 3D NOZZLE DEALERS FOR ENDURAMAXX TANKS FULL ON FARM BACK UP SERVICE for your SPRAYER

SPREADERS AMAZONE ZAM fertiliser spreader, 24m, working order. POA. T Noble Tel: 07816 477293 (Cambs).

Stowmarket 01449 736300 • 01449 737482 07860 618903

F39-01A

BATEMAN RB15 1996 sprayer, with full Bateman service history, NSTS tested Feb 2016, 10,000hrs, contractor booms 12, 18, 20 & 24m twin spray lines reconditioned, new sprayer pump 2500L tank with rate controller, 2 sets of tyres. £23,500. J Ridley Tel 07850 138851 (Beds) F663 RAU Spidromat D3, 2006, 21m HC booms, 1100L tank capacity, external clean water tank, extra hand wash tank, FMC control box, stainless lines, triple holders, NSTS till May, can renew. £6,195+VAT. B Hurst Tel: 07789 902585 (Lancs). TECHNOMA mounted sprayer, 1600L, 24m, tested till June 16, very good condition. £5,500. A Prinold Tel: 07967 145543 (Staffs).

01359 269378 STRAW & HAY

P J Reed FOR SALE & WANTED

RAPE, WHEAT & BARLEY STRAW STRAW IN THE SWATH WANTED for home market & export

01284 810751 07768 353910

TEL/FAX: 01284 724455

GM-R Sprayers Ltd

Delivery service

BEST PRICES PAID

Knapsack Sprayers now in stock

POCLAINE hydraulic wheel motors (4), 2 left hand & 2 right hand, from a self propelled sprayer, vgc. £200+VAT each. Blenheim Agri Services Tel: 07813 764785 (Notts).

Galvanised roofing sheets, box profile and corrugated

COLLECTION & DELIVERY arranged

NSTS FARM TESTING

On call 24/7 throughout the spraying season.

HARDI sprayer 12m, spares & handbook, vgc. £450. AP Shreeve Tel: 07501 468141 (Norfolk). HOUSEHAM AR3000, 2006, 4000hrs, 12/24m boom, 2 sets of wheels, air on/off, just had a full service, vgc. £38,500+VAT. Blenheim Agri Services Tel: 07813 764785 (Notts). HOUSEHAM sprayer 2000L, 1996 model, 2 sets of wheels, LH Agro spray systems in good working order, selling due 2 upgrade call Tom for more info. TC Harland Tel: 07850 324717 (E Sussex). KNIGHT 20m 2500L trailed sprayer with tracker, used this season, good working order. POA. P Noble Tel: 07816 477293 (Cambs). KNIGHT 24m sprayer, working when removed from a Fastrac (demount kit & mounting cradle included). Only £995 to clear. R Pusey Tel: 07711 712527 (Bucks).

KELLANDS AGRIBUGGY 2007, 4ws, 2500L tank, flotation tyres 90%, 2500hrs, 24m alloy booms incl air shut off & recirculation, RDS rate controller, 12.4/36 rowcrops 90%, 1 owner driver from new, available early 2016. R Adey Tel 07801 663043 (Derbys) F673

pad500r@hotmail.co.uk

AMAZONE ZA-M 1200 2009, 4200L in total including extensions, can be made smaller, on 18-24 discs with border limiter, on the move Vary Rate lights, Amados+ box or at extra cost option of Amados 3-D box. £1,500+VAT. H Hutsby Tel 07917 130213/07899 794674 (Warks)

F699

David King Electronics

Contacts: Robert Webb: 07860 801322 Anthony Williams: 07711 947189 Phil Ramsey: 07934 799628 Dominic French: 07802 336880

F39-05B

Buy and sell online – www.farmads.co.uk

Diet Feeder Weighing Systems

Murphy

Steel Stockholders

Posts for grain walling and silage clamps

Agricultural Machinery

01779 821544

S SCOTT & SONS Ltd All types of steel available new and secondhand

both c/w chem ind, rinse & flush, vgc

Sprayers & Fertiliser Spreaders

USED STOCK

mounted 20m...£4,950 or mounted 24m...£6,950

STEEL

F00-104B

Material Handler Joysticks & SLI's

2000 Hardi Mega LPY 1000L sprayer

F39-01B

F31-37A

Tractor & Combine Controls

NEW AND USED SPRAYERS AND PARTS STOCKED FOR:

VICON Vari 600 fertiliser spreader, 12m spread, holds 600kg, in working order, just needs a new spout. £150. R Emery Tel: 07973 532989 (Beds). VICON Vari 600S fertiliser spreader, 12m spread, holds 600kg, in good working order. £300. R Emery Tel: 07973 532989 (Beds).

F00-43B

ELECTRONIC CONTROLS REPAIRED

Sprayer Specialists in the Eastern & Southern Counties Sprayer Specialist in the Eastern & Southern Counties

SPRAYRANGER 100D, missing pump & controls, 3 sets of wheels, R reg, not been used for 2yrs, 3.0L tdi engine. Offers. TC Harland Tel: 07850 324717 (E Sussex). TEAM sprayer, 12m trailed, 1500L, all straight & working order, c/w handbook. £550+VAT ono. BM Margetts Tel: 01954 250908/07766 748621 (Cambs). VICON 12m mounted sprayer, hydraulic booms & height control, induction hopper & wash out tank, 1050L tank, test until April 2016. £550. RH Grey Tel: 01379 890437 (Norfolk).

AMAZONE ZA-X Perfect 1402, only done 300 acres. £3,000+VAT. A Strawson Tel: 07881 684687 (not Sundays) (Suffolk). BAMLETT 12m Air Jet spreader, spares or repair, always been under cover. IP Howard Tel: 07876 315372 (Norfolk). HORSTINE Farmery TMA4 12m trailed low ground pressure Avadex spreader, land wheel drive, 12 volt wheel lift, Honda powered, suitable to tow behind quad bike or UTV, good working order. £3,500+VAT. GR Walton Tel: 07860 826033/01359 230049 (Suffolk). SULKY Reco spreader, 12-24m, gc, barn stored. £450. B Hull Tel: 07969 974614 (Essex). VICON RO-EDW Rotaﬂow 2t fert spreader, c/w weigh cells & Isobus Intelligence ready, only used on 400 acre farm for 1.5yrs from new, selling due to change in farming policy. £8,000+VAT ovno. C Easter Tel: 07970 987242 (Essex).

2015 good quality meadow hay, near Saxmundham, Suffolk, barn stored, small bales & round bales available, delivery may be possible, please call for details. S Aldred Tel: 07917 876572 (Suffolk).

ABBOTT & CO (Wessex) LTD Are buyers & sellers of

HAY & STRAW

F00-22B

SUPER Contractor beet cleaner loader for spares, very good main trace, no engine. £200. D Compton Tel: 07764 687201/01767 262055 (Beds).

KELLANDS Agribuggy 2500, 2010, 4ws, excellent condition, 4000hrs, Michelin ﬂotations 85%, Kleber rowcrops 70%, 24m Pommier booms, air shut off, full recirculation, Teejet Matrix GPS auto shut off, RDS Delta 4 rate controller, available 1.03.16. £65. T Ireland Tel: 07976 890191 (Lincs).

F39-43B

SPARE PARTS (cont)

01603 870903 07860 475964

2015 old meadow hay soft & clean. £3.50. M Jarvis Tel: 07931 706485 (Essex). BARLEY & wheat straw in conventional bales, barn stored. £1.50/bale. J Rice Tel: 01449 711294/07759 650475 (Suffolk). BARN stored 2015 hay, conventional bales. £2.50/bale. A English Tel: 07850 133154 (Norfolk). BARN stored barley straw, small bales. £1.50/bale. SH Wharton Tel: 01379 676296/07901 552443 (Norfolk). GOOD quality hay, barn stored, no rain or weeds. £3.50/bale. J Rice Tel: 01449 711294/07759 650475 (Suffolk).

114 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 114

20/11/2015 10:55

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138 12C33B

Import – Export Tractors & Agricultural Machinery We are now Merlo agents Deutz 7250 TTV, front linkage, 2014, 1000hrs.............POA Deutz 7230 TTV, front linkage, 2014, 2500hrs.............POA McCormick XTX200 Xtraspeed E Plus 07 reg, 6000hrs ..............................................................................£17,500 Berthoud 24m trailed sprayer, BP Tronic................£11,750 CTM 1502 Rockstar destoner, 9 star rows, 40mm spacers, 1500mm web, 72” setting............................. £9,750 Amazone ZA-X1402 fert spreader c/w limited board device & hopper ext, as new ................................POA Bomford 9’ topper .................................................................POA Bomford 467 hedgecutter, 1993 ......................................POA KRM weigh cell fert spreader, 2005, 24m................. £3,300 KRM fert spreader 24m................................................... £1,950

Main Amazone dealers for Suffolk sprayers, spreaders, drills & cultivation

Deutz 6180 (180hp) C shift demo tractor available

Simba 5 leg Flatliner ............................................................£750 Bomford DD3000 tiller........................................................£750 Pearson Rotaform 8 1.8m ..................................................£500

2011 GREGOIRE BESSON 6+1 mounted, on/off the land done 250ha £14,500

DBF 8RGS HYD FOLD MAIZE HEADER for axial flow combine £7,000

VADERSTAD RAPID 3m & 4m, 09-10 and 2012

HORSCH PRONTO 3DC 3m new discs £15,850

HORSCH SPRINTER 4m & 6m c/w f/packer from £15,000

VOGEL & NOOT 4M DISC DRILL c/w Franquet Drillmate 4m £5,000 would split

KVERNELAND PW100 PLOUGH 9+1, auto reset with Pacomat, superb

PAIR OF AMAZONE COMBO 4m with discs low acreage 1 Special £17,500 1 Super £27,500

FARM FORCE BOOTI-MATE 6M TINE DRILL hyd-fold c/w f/tank (also 4m Rigid)

09 VADERSTAD 300C 3M RAPID with grain and fert kit £21,000

CASE IH PUMA 215 3106hrs, 50kph, XEO-BIB 710/70R42 due in

NEW JM 24T CHASER telescopic axle, 900 tyres, shifts 11t/min £34,500

Buy and sell online – www.farmads.co.uk

Cousins Patriot 3m, 2012 unused ....................................POA

IN STOCK NEW ROLLAND ROLLSPEED 6835 18t, 560 Nokia, 80kph from £18,500

Genuine JCB Service and Parts available

Stanhay 5981 beet drill 12 row ........................................£750 Ex demo McConnel 3m Discaerator c/w DD packer roller.............................................................................POA NEW Larrington 14t trailer .................................................POA

SPECIAL OUT OF SEASON TERMS ON: All Amazone Fertiliser Spreaders prices reduced

Pakenham Bury St Edmunds Suffolk • IP31 2JS

01359 232155 After Hours:

07768 007528

Safepac diagnostic fault finding

Diagnostic code reading for ALL makes of Tractors Trucks Plant & Machinery

Fully equipped workshop located at Mildenhall. Full recovery/transport/collection service available if required. Mobile on-site diagnostic service available across East Anglia at competitive rates

12C56B

Visit our NEW website on: www.suffagri.co.uk • E-mail address: office@suffagri.co.uk

12C02B

01673 885200 Ofﬁce 01638 713323 Mobiles: Martin 07799 334739 Dale 07917 328875

Mobile: Olivier 07831 240000 Unit 10B Newtoft Business Park, Newtoft, Lincoln LN8 3WA

View full stock c/w photos on

www.boccasion.com December 2015 www.farmads.co.uk 115

farmers_guide_class_december_15.indd 115

20/11/2015 12:58

Very good prices paid promptly

Call Jeff on

F00-48B

off the field & throughout the winter

Buy and sell online – www.farmads.co.uk

07977 268113 (T) MINI Hesston bales (100) of early July cocksfoot/timothy hay, no ragwort, barn stored, 6 miles from A1 Lincs. £18/bale (minimum 25). WH Booth Tel: 07885 460489 (Lincs). QUALITY meadow hay 7’x4’x3’ bales, barn stored. Delivered or collected. CE Leadbetter Tel: 07834 233152 (Cambs). SECOND quality hay, strong round netted bales, over 100 in total. Offers to clear. R Pusey Tel: 07711 712527 (Bucks). SMALL bale seed hay, 2015. PW Andrews Tel: 01438 861747/07961 392079 (Herts). SMALL bales of 2015 hay, 280 in total, barn stored, good quality. £3/ bale. Collection only. J Howells Tel: 07973 915181 (Essex).

SALE & HIRE 1,000–15,000 gal mild steel, stainless steel, bunded & glass lined

LARGE STOCKS COMPETITIVE PRICES

F42-73B

WHEAT, BARLEY & RAPE STRAW also SOFT MEADOW HAY

Call ALLEN CONNELL on

01638 712328 Suffolk 01992 451629 Herts/Essex DIESEL bowser, mobile, 1.5m long, 1m diameter, tyres not good, 11.5x20” (or 22”?), tap on front of tank. Cheap. R Rayner Tel: 07808 066655 (Cambs).

REGAL�TANKS INDUSTRIAL STORAGE TANKS HIRE • NEW • USED

01502 710100 Fully searchable database at...

EIGHT tanks, 1800L, blue tanks in galvanised stackable stillages. £120 each or £800 in total. Located at Junction 9 M5 Junction 1 M50. A Warner Tel: 01684 592126 (Worcs). ENDURAMAXX 13000L horizontal tank for transporting liquid nitrogen or water, can be mounted on trailer, good condition.£2,250+VAT ono. E Clark Tel: 07879 698807 (Norfolk). F41-24B

We can supply all your

TANK REQUIREMENTS NATIONWIDE

AD-BLU TANKS

40–10,000L dispensers

available at competitive prices

07860 352739

750-GALLON (approx) water tank on twin wheels, good condition, no leaks, tyres ﬁrm, ring hitch, ideal for meadow livery. £100. J Sayer Tel: 01371 870123 (Essex).

Ad Blue specific pump

chrisglass@hessettgrain.freeserve.co.uk

www.hgtanks.co.uk

STEEL fuel tank 20,000L, new 06, not used for 3yrs, bunded, electric pump, auto shut off gun, 8m retractable hose, the odd scratch around, very tidy. Photos on request, delivery possible. £6,750+VAT. H Hutsby Tel: 07917 130213 (Warks).

TILLAGE TACKLE

£499

£399 • Manufactured in the UK • 12 month warranty • 220L Capacity

01353 862044 THREE 600 gall water tanks. £40 each. GA Meadows Tel: 01728 660577/07951 848638 (Suffolk).

www.allenconnellmachinery.co.uk

Visit our new website www.thekinggroup.co.uk/tanks

www.regaltanks.co.uk

TANKS

07922 409140(T)

F41-11A

WANTED

STORAGE TANKS

F41-07B

HAY, 4’ round bales, barn stored. Howell & Sons Tel: 01760 440297/07798 668239 (Norfolk).

Ex demo ERTH

3 leg arable auto reset subsoiler

TECHMAGRI PFL312 Proﬁlab Discotwin subsoiler/cultivator, 2008 build, 3m with 12 Michel type legs (can be adjusted/removed to suit) followed by twin row wavy disc packer/press, used Autumn 2015 and with very good wearing metal remaining, ﬁtted with overhead brackets to take small seed distributor unit (unit not included), an ideal tool for sowing OSR, VGC. £3,995+VAT. GDO Howell Tel: 01728 723683/07903 089391 (T) Suffolk. BROWNS 2 leg subsoiler with depth crumbler roll, nearly new legs & points. A Bell Tel: 01205 460268/07720 495007 (Lincs).

CAMBRIDGE rolls, 9’ wide, 24” rings, gc. £150. G Shepherd Tel: 01283 732275/07940 597410 (Derbys). COUSINS 4.8m hydraulic folding front press, c/w DD rings & front mounted Agrila spring tines, done very little work, excellent condition. £6,000+VAT. W Steel Tel: 07980 929035 (Kent).

MAIDWELL MOLER Well proven design

Single and twin and three legged machines available Mounted and trailed

F42-06A

TELEPHONE: 01604 686216 MOBILE: 07973 265378

FIVE-LEG buster with coil on back. POA. T Noble Tel: 07816 477293 (Cambs). GANG rolls, dog & two pups, choice of 2 sets, both in working order. £300 each. R Emery Tel: 07973 532989 (Beds). HAYLOCK 3 leg subsoiler with 3m crumbler, tidy condition. £1,000+VAT ono. E Clark Tel: 07879 698807 (Norfolk). HORSCH Terrano 4MT, one pass cultivator, excellent condition. £29,995+VAT. J Furness Tel: 07973 843230 (Glos).

GRANGEWARDS (THE HARROW KING)

Pan Busters & spirals ALL BLENCH SPARES 454 Herne Road, Ramsey St Mary’s, Huntingdon, Cambs.

01733 844590 (24hrs) KONGSKILDE Triple K spring tines, 9’ wide, 27 tines. £150. G Shepherd Tel: 01283 732275/07940 597410 (Derbys). KUHN 3502 power harrow, packer roller, excellent condition, very original, stored inside, £3,650+VAT. RL Maundrell Tel: 07785 568800/01527 854834 (Warks). F42-07B

HANKINS ENGINEERING www.maidwellmoler.co.uk

COUSINS 5m press. £2,750. PW Andrews Tel: 01438 861747/07961 392079 (Herts).

KUHN POWER HARROWS & ACCORD DRILLS NEW AND USED MACHINE SPARES & REPAIRS

F42-03B

ANDY GUEST

F42-05B

TRACTORS

WEARPART SPECIALIST

■ ceramic ■ tungsten carbide ■ genuine & high quality option plough, cultivation & root crop parts stocked Call: Email: Web:

Massey Ferguson 372 65hp 4wd

01728�621680 enquiries@mdt-agri.co.uk www.mdt-agri.co.uk

KUHN 4m power harrow. £2,500+VAT. RW Hopkinson Tel: 07976 424263 (Lincs). KUHN HRB 302 D power harrow, 2002, packer roller, new PTO shaft, spare blades. £2,950. LD Rich Tel: 07774 112211 (Glos).

01636 700608 07860 637654

COUSINS brand new (never used) crumbler packer for Flatlift, 2m. Offers. G Dunn Tel: 01945 870570/07768 904984 (Cambs). COUSINS Sidewinder 6m Cambridge rolls, hydraulic opening & closing, gwo, last used 2014, good tyres, paint faded. R Rayner Tel: 07808 066655 (Cambs). ECE Sidewinder 7m rolls, 22” rims, gwo. POA. T Noble Tel: 07816 477293 (Cambs). EDLINGTON 6.3m fold back Cambridge rolls, 22” rings with breakers, gwo. £3,000. S Bartle Tel: 07884 238552 (Notts).

KUHN/ACCORD power harrow drill combination, 4m, new tines, vgc, ready to go. £5,900. A Goodacre Tel: 07901 917707/01476 861672 (Lincs). LELY/TULIP Roterra 350-45, 3.5m, 2008, coupled with packer roller & still with original club tines, 1 owner from new, outstanding condition. £6,000. E Holland Tel: 07799 085863 (Cambs). MF Greenland 5m power harrow, working order, new tines this season. £2,000. HA Robinson Tel: 01964 536699 (E Yorks). MICHEAL Moore 4m hydraulic folding double Cultipress, nice condition. POA. T Noble Tel: 07816 477293 (Cambs). PARMITER 40’ harrows, hydraulic lifting, manual folding, tyres OK but perished, easy size to replace. R Rayner Tel: 07808 066655 (Cambs). QUIVOGNE Tinemaster, 3.2m, hyd reset, subsoil tined, new cutaway discs on front, folding DD packer on rear, always stored inside, paintwork good. £8,500. M Hornbuckle Tel: 07801 101645 (Leics). RANSOMES twin leg subsoiler. £700. PW Andrews Tel: 01438 861747/07961 392079 (Herts). SIMBA 6m pig tail tine cultivator, hyd folding, in great condition.£3,995+VAT. J Furness Tel: 07973 843230 (Glos). SUMO GLS auto reset 4 leg grassland subsoiler, as new, done 60 acres. £7,500+VAT ono. Gould & Son Tel: 01749 672303/07976 375551 (Somerset). SUMO Quatro, 2013, 4m, hydraulic folding, immaculate, as new condition. CE Leadbetter Tel: 07870 293052 (Cambs). VADERSTAD 8m press, rings 2 years old, in good working order. £25,000 ono. S Parrish Tel: 07736 433018 (Cambs). VADERSTAD Rollex 620, 6.2m, good condition. R Statham Tel: 07966 422469 (Staffs). WEAVING 8m stubble rake, little used. £6,800+VAT. J Riseborough Tel: 07971 089443 (Norfolk).

£9,999 low profile roof, PUH, Cat 2 linkage, 12x12 synchro-shuttle transmission, recently refurbished, 4100hrs from new, previously owned by the National Trust

F44-156B

CAMBRIDGE rib roll, 4m, box frame, end tow kit, hyd adjust clod comb, full width weight frame, c/w concrete blocks, good clod crusher. £425+VAT. PE Beales Tel: 01284 828360/07584 189359 (Suffolk).

STRAW & HAY (cont)

Please call 01349 867521 or e: sales@mclarentractors.co.uk www.mclarentractors.co.uk Strathpeffer Road, Dingwall, Ross-shire

GREAT PLAINS SIMBA 4.6M X-PRESS as new condition, bought early harvest 2014, done 2 seasons on 600 acre farm. IJ Longden Tel 07966 157472 (Notts) F692 KUHN power harrow, 3m, packer roller, c/w a few spare tines, gc. £1,500. B Hull Tel: 07969 974614 (Essex).

CASE 2150 vineyard 4wd tractor, air cooled 70hp engine, 1995, 3414hrs, taxed for road use, cab with carbon ﬁlter, 2 double acting spool valves, fronts 90%, rears 60%, front weights, trailer lights socket, Cat 2, adjustable width. £5,490+VAT. J Adlam Tel: 01379 741200 (Norfolk). CASE 535 Quadtrac, 2009, 4900hrs, excellent condition, 2 tracks @80%, 2 @50%. £79,000. S Parrish Tel: 07736 433018 (Cambs). FENDT 818, 06 plate, cab & front suspension, front linkage & PTO, new engine 2013, new vario 2014, clean straight tractor. P Moody Tel: 07767 673493 (Derbys).

116 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 116

20/11/2015 11:13

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

A B C

Abbotsley Brigstock Chatteris

01767 677316 01536 373238 01354 694169

MONEY WELL SPENT

Fax: 01767 677451 Fax: 01536 373392 Fax: 01354 694218

Profi Magazine

NEW MAXXUM CVX: TAKES EVERY JOB IN ITS STRIDE Buy and sell online – www.farmads.co.uk

The new Maxxum CVX has a smooth-as-silk constantly variable transmission, a Multicontroller armrest with all key functions at your fingertips and a big, extra-quiet cab. It’s no slouch for power too, with fuel efficient engines up to 130 hp - with 22 hp more on tap, and a lift capacity of up to 7.8 tonnes.

CVX NEW – WITH N TRANSMISSIO

www.caseih.com

Kuhn TBE 210

www.collingsbrothers.co.uk email: ben@collingsbrothers.co.uk

A PO A

New Merlo TF42.7 CVTronic

Great Plains Cultipress 6.6

Merlo 38.7CS EX DEMO

00 4, £6

00 5,

2014 Case IH Puma 160 CVX

PO A

Case IH Magnum 315

PO A

Case IH Puma 160 EX HIRE

£7

LOW HOUR CASE IH PUMA 160 CVX TRACTORS ARE NOW AVAILABLE

Great Plains Cultipress 5.5 EX DEMO

12C12B

December 2015 www.farmads.co.uk 117

farmers_guide_class_december_15.indd 117

20/11/2015 09:38

Arkesden Road, Clavering Saffron Walden, Essex CB11 4QU

B W M ACK (Machinery) LTD.

Tel: 01799 550268 Mob: 07860 527476

New Machines

Buy and sell online – www.farmads.co.uk

Used Equipment

CLAAS Arion 630 Cebis 50kph 4500hrs air brakes suspended axle ......................................... £29,000 RENAULT Ares 656 RZ 2003 (53) front axle suspension front linkage cab suspension ............ £15,000 VICON 1601 variable chamber baler.......................................................................................... £5,000 SPEARHEAD Q2800 front/rear mounted flail mower, hydraulic offset 2.8m wide ........................ £4,500 SPEARHEAD 300 4W heavy duty 3m rotary mower, c/w depth wheels ....................................... £3,000 EDLINGTON 8.4m Weed Wiper, good condition ......................................................................... £3,250 VOGEL & NOOT 3m power harrow/drill combination, c/w Vogel & Noot A300 air drill ............... £13,500 HONDA Foreman TRX500 FM1 quad bike, road registered 2015, Farm Easy road lighting kit, tow ball, only 103 miles, as new condition ............................................................................ £5,900 TRAILED ring press 3m, c/w hydraulic lifting transport wheels ................................................... £2,250 KRM R305 4m drill c/w hyd fan drive, following harrow ............................................................. £3,250 KVERNELAND LD 85 5 furrow plough ........................................................................................ £4,250 LEMKEN 3 furrow plough ............................................................................................................ £850 LEMKEN 4 furrow plough .......................................................................................................... £1,400 TRIPLE K folding cultivator......................................................................................................... £2,000 BROWNS twin leg subsoiler ......................................................................................................... £800 HARDI LY 800 sprayer hydraulic folding boom electric controls ................................................. £1,800 GULL 10t trailer, c/w hydraulic tailgate, rollover sheet ................................................................ £4,200 PARMITER Utah 250 disc harrows ............................................................................................. £3,000 8t LOW loader machinery trailer, 4.5m drop to floor deck, super single wheels, exc condition ... £5,400 PETTIT 8t trailer c/w new wheels & tyres.................................................................................... £3,300 VOGEL & NOOT XS 950 5f plough c/w manual variwidth, WY400 bodies.................................... £5,500 BOMFORD 577 reach mower .................................................................................................... £3,000

CLAAS Sales contacts

Brian Cornwell 07899 965066 Paul Warner 07795 845308

Paul Pearce 07860 507372

www.tractor–dealers.net Email: sales@eatractors.co.uk

2008 Case CVX 150 4wd – 8818hrs, 50k, air brakes, suspension, very good tyres, lovely condition ..............................................................................................................

£19,750

2005 McCormick MTX 120 4wd – 7787hrs, f/linkage 80% rears .....................................

£13,500

2003 McCormick MTX 140 4wd – 11162hrs, f/linkage, f/PTO, suspension .....................

£12,500

2009 McCormick TTX 190 Xtraspeed 4wd – 5433hrs, 40k, suspension, few, 80% tyres, excellent condition ................................................................................................

£21,750

2012 McCormick TTX 230 Xtraspeed 4wd – 3183hrs, 40k, air brakes, f/linkage & PTO ...

£30,000

2008/9 Claas Ares 557 ATZ 4wd – only 1850hrs, 40k, few, very clean tractor.................

£19,750

1996 John Deere 6400 4wd P/quad – only 6396hrs, 40k, on very good tyres .................

£13,500

2007/8 Massey Ferguson 6465 4wd – 5400hrs, 50k, front linkage .................................

£21,500

2008 Massey Ferguson 8460 Dyna VT 4wd – 7259hrs, 50k, f/linkage, cab suspension, good order for hours ...................................................................................

POA

2008 New Holland T6070 4wd Range Command – 2993hrs, 40k, 60% tyres, very good condition .......................................................................................................

POA

2003 New Holland TS100 4wd dual power – 5859hrs, very clean tractor ........................

£16,000

1995 JCB 1115 4wd fastrac – 8457hrs, in good working order.......................................

£9,750

1997/8 SAM 2500 Lo Line sprayer – 24m, 8700hrs, very clean, 2 sets of wheels...........

£6,750

Allman 925 12m mounted crop sprayer ................................................................no VAT

£695

Kuhn GMD 55 disc mower – good working order ............................................................

£1,450

Major Slurri-Vac 1300 tanker – good condition ...............................................................

£3,250

Diesel bowser – 4500L, good condition..........................................................................

£3,250

Set of Cambridge rolls – genuine good order ........................................................no VAT

£495

Stoll 20.1 FZ Profiline front loader – to fit John Deere 4 cylinder 30 Series tractors ..........

£3,850

Brand new 14t NC dump trailer c/w magic door ..............................................................

POA

Brand new 9t 20’ NC low loader trailer ............................................................................

POA

Brand new transport boxes, in stock, 5’..........................................................................

£295

WE ARE ALWAYS LOOKING FOR GOOD QUALITY SECONDHAND TRACTORS PLEASE VISIT OUR WEBSITE FOR OUR CURRENT STOCK LIST & PHOTOS

Barroway Drove, Downham Market, Norfolk PE38 0AL

NOW SELLING THE NC TRAILER & FLEMING RANGE – PLEASE SEE WEBSITE OR CONTACT US FOR MORE INFO

Tel: 01366 324256/324311 Fax: 01366 324431 Out of hours: 07795 845308 • www.bwmack.co.uk

KP Tractors 07 reg 06 reg 55 reg 06 reg V reg 52 reg Y reg N reg 07 reg 06 reg 07 reg 04 reg P reg 09 reg 10 reg 06 reg M reg 1964 reg A reg C reg M reg Y reg 51 reg 04 reg 04 reg 06 reg 08 reg 51 reg P reg L reg 05 reg W reg N reg R reg R reg H reg 01 reg 99 reg 1984 10 reg 04 reg

12C35B

12C37B

CLAAS Arion 640 CIS 50kph front linkage, Proactive axle, 177hp, demonstrator.............................POA CLAAS Arion 650 Cebis 50kph front linkage, air brakes, proactive axle suspension ........................POA CLAAS Axos 340CX tractor 102hp air conditioning 4wd .......................................................... £30,500 MERLO 42.7 Turbo Farmer c/w boom suspension, pick up hitch, trailer braking, air conditioning ....POA SPEARHEAD Multicut 430 rotary mower, 3 blade 4.3m cut, tri-folding for transport ................... £8,500 SPEARHEAD RHD 2.25m hydraulic offset flail mower ................................................................ £6,000 SUTON ELCS 70 grain bucket, 7’6” wide c/w Merlo brackets..................................................... £1,300 SUTON EHDG 233 power grab, 7’6” wide c/w bolt on brackets for any machine........................ £2,400 VOGEL & NOOT XMS 5f hydraulic Variwidth plough.................................................................. £13,000 VOGEL & NOOT 6.3m hydraulic folding rolls c/w breaker rings .................................................. £6,700

SPREADERS TRAILERS & TANKERS The Independent Spreader Trailer & Tanker Specialists

01652 655777 07796 957735 Fountain House, 111 Scawby Road, Scawby Brook, Brigg, N Lincs DN20 9JX

MF 8480 4x4 FS CS FL 50K 2900hrs MF 6499 4x4 FS CS 5500hrs MF 8470 4x4 CS vario gearbox 50K 6000hrs MF 8480 4x4 FS CS FL vario gearbox 40K 7700hrs MF 8270 4x4 FL 5900hrs MF 8250 4x4 Xtra Dynashift 5075hrs 75% tyres mint MF 8240 4x4 FS Dynashift 7300hrs MF 8110 4x4 5400hrs MF 6499 4x4 FS CS FL 6300hrs 235hp MF 6490 4x4 air brakes FS CS 185hp 4600hrs MF 6480 4x4 FS CS 5600hrs MF 6470 4x4 Dyna 4 4200hrs MF 6150 4x4 Dynashift 7800hrs MF 5480 4x4 Dynashift 4900hrs MF 5475 4x4 5500hrs MF 5460 4x4 4200hrs 16 Speed MF 3645 4x4 Dynashift 7000hrs MF 65 Mk2 good condition Case 885 XL 2x2 6000hrs Case 885 4x4 with Quicke powerloader JCB 3185 4x4 8400hrs JCB 2135 Fastrac 4x4 4ws 7100hrs Manitou 526 4x4 PUH 5000hrs JCB 535/125 4x4 legs JCB 530/70 4x4 JCB 541/60 teleporter 4t lift 4x4 6500hrs JCB 524/50 telehandler 2400hrs Claas K70 teleporter 4x4 6700hrs Sanderson TL7 teleporter 5100hrs Sandeson 625 4x4 Perkins Engine 6700hrs New Holland TS115A 4x4 with Quicke 55 loader 6300hrs Ford TM 115 4x4 7000hrs Ford 7840 4x4 SLE 7000hrs blue roof Ford 7840 4x4 SLE 6800hrs blue roof Ford 7840 4x4 SL 5500hrs blue roof Ford 6810 4x4 with Farmerhand loader 7000hrs Matbro TR280 4x4 Cat 1.5t mini digger 2800hrs Track Marshall 155 3800hrs with linkage Kawasaki 360 quad bike 4x4 road legal Hayter LT324 grasscutter 3500hrs Kubota B2400 4x4 Hopper co 9t corn dryer PTO & gas Manitou bucket

email: kptractors1@outlook.com fax: 01652 651476 www.kptractors.co.uk

SPREADER, TRAILER & TANKER HIRE

ECE

Specialists

BUNNING

Specialists

TANKERS

2008 LOWLANDER WIDE BODY 230, 3 horiz beaters, built in SPINNER DECK with canopy hood and border control kit, twin axle, sprung suspension, 600/50x22.5 radials, guill door, large flared bolt on ext sides, w/a PTO assy, 20mm floor chains, excellent cond COMING IN SOON 2013 two LOWLANDER 105 MK4 HBD built in spinner deck with two horiz beaters, 620/75x38 rads, guill door, s/d/bar, flared sides etc, well maintained 2012 LOWLANDER 105 Mk4 c/w extended body height with large flare top, WEIGH CELL ready, guill door, rear drawbar etc, 620/70x38 rads, vgc, serviced 2007 LOWLANDER 105 Mk4, 580/70x38 rads, guill door, good cond 2009 LOWLANDER 90 Mk4, high augers, 18.4x34 tyres, guill door, good cond

2011 HISPEC 2300 gallon slurry tanker, single 10 stud axle, 28.1x28 radials, lights, hyd brakes, s/d/bar, mudguards, little use, dirty water only, excellent cond 1996 3500 gall, s/steel, single rear steer via 5th wheel, air susp, airbrakes, 445/65x22.5 radials, 2” pipework, top hatch, rear cabinet, side rails, front platform, vgc

TRAILERS

2011 AS MARSTON MDX 18t DOMEX body, high speed model with air brakes & LSV, twin axle, 4 leaf parabolic susp, 60o tip – single 5 stage tip ram, hyd door, ext sides, front to rear cover with side arms, f/window, Mich 560/60x22.5 radials, s/d/bar, mudguards, swivel eye, vgc 1996 AS MARSTON 14t Root trailer, spr susp, s/singles, hyd brakes, hyd taildoor, s/d/bar, lights, tilt rack, grain chute, good cond 1996 BAILEY 14 monocoque tipping trailer, HIGH SPEED SPEC, new 445/65x22.5 radials, 10 stud round axles, 3 OTHER SPREADERS COMING IN – leaf parabolic comm suspension, air/hyd brakes, s/d/bar, RING FOR DETAILS hyd t/door, g/chute, rollover cover, full width f/window, grain use only, always barn stored, immaculate OTHER RICHARD WESTERN 10t single axle agri dumper 2010 K-TWO Evo 1800 18t, 710/65+42 rads, guill trailer, NEW 600/50x22.5 radials/axle/rams, refurbed door, large ﬂared body, wide spread, excellent condition good cond 2000 SAMSON SP 14 - 20, BUILT IN (large dia) 2 2014 STEWART PS16-21 (PRO SERIES)16t, SPINNER DECK with canopy hood and horiz. beaters, Hardox body 20’x8’x5’, full high speed comm. spec, Michelin 620/75x34 radials, guill door, ext sides, vgc, 560/60x22.5 rads, air/hyd brakes-ABS-LSV, etc etc as always barn stored, not had a hard life GX18 below (see photo below) SANDERSON SB55 Rough Terrain forklift c/w duplex mast 2015 STEWART GX18-23S 18t 22’x8’x5’, high speed comm spec, silage sides, rollover cover assy, SAS 560/60x22.5 rads, s/d/bar, arched headboard full NEW 1.5T tipper h/d, hinged sides, extension sides with high one piece run up D ramp, very useful all window, hyd door, grain chute, hi-level taildoor lights, etc SOLrear rounder for stables/estate use, large garden, caravan/ OTHER TRAILERS COMING IN, PLEASE RING camp site etc, in green FOR DETAILS OR REQUIREMENTS

OF SEASON TERMS AVAILABLE TRAILERS OUT Contact us for further details

12C24B

WANTED – TRAILERS & ALL MODELS BUNNING SPREADERS

Contact Alan 01263 710679 • 07887 722978

12C38B

email: alan@sas-agri.uk web: www.sasspreaders.co.uk

118 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 118

20/11/2015 09:44

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

Buy and sell online – www.farmads.co.uk December 2015 www.farmads.co.uk 119

farmers_guide_class_december_15.indd 119

18/11/2015 11:43

For more pics and info visit our website

www.cfsukltd.co.uk email:sales@cfsukltd.co.uk

UK Ltd

Chris: 07808 703325 Adam: 07802 776113

High Quality, Low Houred, Used Agricultural Machines. WARRANTY ON ALL TRACTORS.

New Holland CR8080, On Tracks, 14 Reg, 281 Threshing Hours, Smart Steer

New Holland T7.260, 63 Reg, Front Links & PTO, 1059 Hrs, Power Command, 50KPH

New Holland T7.235, 14 Reg, 7.25 Hrs, Front Links, Side Winder 50KPH, Michelin Tyres, Mid Mount Valve

New Holland T7.235, 14 Reg, Power Command 50KPH, 587 Hrs

New Holland T7.210, 14 Reg, 1337 Hrs, Power Command 50KPH, Front Links & PTO

New Holland T7.200, 14 Reg, 874 Hrs, Range Command, 50Kph, Nh 770 Tl Loader

New Holland T7.235, Power Command, 50KPH, Front Linkage, 13 Reg, 1258 Hrs

New Holland T7.200, 63 Reg, 1196 Hrs, Range Command, 50KPH, Front Links & PTO, 90% Tyres

New Holland T7.250, 2012, Auto Command, 2500 Hrs, Front Linkage, Weights, Midmount Valve, 650/75/38 Rears

New Holland T7.200, 62 Reg, Front Liks & PTO, Power Command 50KPH

New Holland T6.175, 63 Reg, 1158 Hrs, 50KPH, 650x38 Tyres, Front Links

New Holland T7.210, Power Command, 50KPH, New Tyres Front & Rear, 62 Reg, 1105 Hrs

New Holland T7.185, 62 Reg, 1155 Hrs, Range Command, 50KPH

New Holland LM5060 Plus, 62 Reg, 677 Hrs, Air Con, Power Shift Transmission

New Holland T6080, 61 Reg, 5300 Hrs, Range Command, 50KPH, Air Brakes, 650x42 Rears, 540x30 Fronts, Weights

New Holland T5.95, 63 Reg, 1635 Hrs, Loader Ready, Air Con

New Holland T6070, 59 Reg, Range Command, 50KPH, Front Links, 600x38 Tyres, 6500 Hrs

New Holland Tm165 Ultra, Y Reg, 50Kph, 42” Rears, Front Links, Front Pto.

£65,500

£185,000

Buy and sell online – www.farmads.co.uk

01865 731596

£49,950

£51,500

£46,500

£38,950

£62,000

£49,950

£30,500

£58,500

£49,950

£29,500

£56,700

£48,950

£27,750

£53,500

£47,500

£17,950

MANY OTHER 13 & 14-REGISTERED NEW HOLLAND MODELS AVAILABLE - CALL FOR DETAILS

CLAAS Western Will Greenway Matthew Rice

Mob: 07774 338233 Tel: 01373 831832

claas-western.co.uk

Mob: 07973 947849

MERLO P34.7

£23,750

CLAAS ARION 640 CEBIS

CLAAS AXION 810

£60,000

CLAAS LEXION 780 TT

2008, Hydro Transmission, 2700 Engine Hrs MO0005 Bibury

2012, 50kph, 2342 Engine Hrs

CT1027 Winchester

2010, 50kph, 7600 Engine Hrs

£36,850

CT1018 Frome

£190,000

2013V1200 Cutterbar, 1303 Engine Hrs, 1029 Drum Hrs CL8015 Marlborough

Richard Charman

CLAAS ARION 650

2013, 50kph, 2963 Engine Hrs

£68,500

CT1021 Frome

CLAAS QUADRANT 3200 RF TA £55,000 2013, Roto Feed, Tandem Axle

CL7989 Winchester

Tel: Mob:

01285 740408 07801 316791

CLAAS JAGUAR 950

£135,000

2012, 20 Blade Cylinder, 1407 Engine Hrs, 1006 Drum Hrs CL7992 Winchester

KUHN HR3004

£6,450

2009, Kuhn Power Harrow/Sulky Drill Packer Roller, Pre-emergence Markers, Quick Release Tines KU0132 Frome

12C22B

120 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 120

18/11/2015 12:23

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

J Murrell Norfolk Farmers

01493 750999 info@jamesmurrell.co.uk Contract Farm Services

Used Agricultural Machinery Dealers

2001 GEM SP3000 CASE 24m, 3000L sprayer, 7112hrs, Cummins 152hp Turbo, 2 sets of wheels ................................ £24,000

1969 FORD FORCE 5000 75hp, chrome grill, round mudguards, Sekura cab, purest original 1st class condition............................. £15,000

2007 FENDT 820 TMS 200hp, 5500hrs, 55k, new Vario 1500hrs ago, excellent condition............................. £45,000

2004 ZETOR FORTERRA 10641 4x4, 3933hrs, compressor, weights, front fenders, very nice ....... £14,000

2007 FENDT 930 VARIO TMS 5200hrs, reverse drive, 300hp, new 710 tyres, mint condition..... £59,000

NEW RANGE JPM 19T BEAVERTAIL LOW LOADER TRAILERS available in stock................... £7,250

MASCHIO DC300 power harrow, spiked packer, tines 80%.............................. £2,500

2013 RICHARD LARRINGTON MAJESTIC 17-18t trailer, full spec ........ £19,000

ROWCROP WHEELS & TYRES 380/85R30 & 380/85R46 ﬁxed rim 50k wheels ........................... £2,250

LATE LANDRB25, ROVER DEFENDER 2004 2010 BATEMAN 90 COUNTY HARD24TOP 7083hrs, 3000L, & 36m 40000 highindependent spec, contourmiles, booms, FSH .................................... boom inclination, Agleader £16,100 Integra GPS ready c/w auto

2006 GENSET MGK1500 fast tow generator 1494hrs, 3 cylinder Kubota, 240 & 110 Volt, powers welder ...................... £3,500

2001 NEW HOLLAND TS110 1800hrs from new, 1 owner, c/w Quicke 3360 fore end loader ................................. £25,000

2012 RANSOMES HR300 road registered, 72” out front deck, 33hp Kubota diesel, 795hrs, top spec ............................... £8,000

NEW RANGE JPM 14T HEAVY DUTY DUMP TRAILERS in stock................................. £7,250

2013 CLAAS SCORPION 7030 Vario 40kph, JCB head & pallet tines, 2600hrs, top spec............... £38,500

CRANE FRUEHAUF 40’ STRAW trailer, steel suspension, hyd brakes, dolly ..................................... £2,500

AS MARSTON 8T HIGH TIP auto tail gate, tandem axle, straight ................................. £3,000

KVERNELAND LS95 5 furrow hydraulic variwidth, press arm, 100 acres/yr from new, vgc ....................................... £8,000

2012 CLAAS SCORPION 7030 Vario 40kph, JCB head & pallet tines, 4000hrs, full spec ............... £35,500

2004 NEW HOLLAND TS135A 1996 ZETOR 8520 2wd, 4655hrs, power steering, pickup 3766hrs, front linkage & PTO, hitch, excellent ...................... £7,000 420/70R28 90%, 520/70R38 90%, 4 spools, cab suspension.......... POA

CRANE FRUEHAUF GT high speed aluminium 4500 gallon, 20250L tanker, hydraulic brakes, fast ﬁll Honda pump, excellent.... £12,500

NEW AGRITEND BALE HANDLER (squeeze) choice of ﬁttings ........................ £895 Delivered in UK

2005 SIMBA HORSCH SPRINTER 4ST no till seed drill, radar, Agtron box, good spec, low H/A............. £11,000

We are JPM Trailers’ East Anglia Dealer J Murrell • Willow Farm • Norwich Road • South Burlingham • Norwich • Norfolk NR13 4EZ

07770 692891

All prices + VAT

12C04B

For more pictures and further details of our stock visit our website www.jmurrell.co.uk

Buy and sell online – www.farmads.co.uk

JOHN DEERE 8345R 2010 model, 1600hrs, IVT AutoPower transmission, front weight, wheel weights, 710/70R42 70%, 600/70R30 70%, 5 deluxe spools ................................ £79,500

December 2015 www.farmads.co.uk 121

farmers_guide_class_december_15.indd 121

18/11/2015 10:24

12C19B

01926 640637 � quote FG or check our website www.ellismachinery.co.uk if you can't see what you're looking for Call us on

Buy and sell online – www.farmads.co.uk

or email: sales@ellismachinery.co.uk

Over 400 machines in stock

COUSINS front discs 3m, good machine, good discs, 2009 £4,950

FARM FORCE front press 3m, nice press, good 45 degree rings & front tines, levelling boards £3,950

SUMO front press 1.5m, very nice, new tips, c/w 3m leading tines £3,150

HEVA folding front press 4m, good press, c/w front paddle boards, hydraulic fold £5,950

SIMBA single press 3m, nice press on good rings £2,950

COUSINS front press 4m, hydraulic fold, good heavy duty press £3,750

SIMBA cultivator folding 4.5m, excellent levelling tool, new points, twin lev boards, c/w following harrow, hyd fold £3,950

LEMKEN Koralle 4m, good light cultivator £2,950

JOHN DEERE cultivator 2.5m, new points, auto-reset legs, 11 legs £1,950

VADERSTAD NZ cultivator 6m, very nice machine, hydraulic levelling board, new metal all through, good tyres, hydraulic fold £7,950

BOMFORD Dynadrive 3m £1,500

VADERSTAD Carrier 820 8.2m, excellent machine, very good metal c/w air brakes & straw rake, steel ring packer, 2013 £29,950

DOWDESWELL speed harrow cultivator 5m, hydraulic fold, c/w crumblers, levelling boards, 2009 £4,750

FOLDING springtine cultivator 4m, depth wheel, c/w following harrow, manual fold £1,950

KONGSKILDE Germinator 3m, excellent machine, hardly used, very good metal, c/w crumbler packer £6,250

VADERSTAD Carrier 500 5m, c/w paddles, steel ring packer, very high spec machine £15,250

VADERSTAD RX620 rolls 6.2m, very genuine set of rolls, very good rings & breakers, new tyres £5,250

COUSINS Sidewinder rolls 6.3m, very good set of rolls on good 20’’ rings & breakers, 2011 £6,950

COUSINS rolls 12.3m, good heavy duty set of rolls, 22” plain rings £10,250

SIMBA rolls 6.6m, 24” rings £4,950

TWOSE rolls 12.4m, new, 24” rings & breakers, excellent set, 2015 £18,950

COUSINS rolls 9.3m, good tyres, c/w 22” rings & breakers £7,950

KVERNELAND LD85 plough 5f, man variwidth, man f/furrow, superb condition, discs available, metal - 85%, No 8 boards £10,500

LEMKEN conventional plough 5f, very nice plough on good metal, True-line adjustment £2,250

KVERNELAND ED 85/200 plough 4f, No 28 bodies, auto reset discs all through, man variwidth, hyd f/furrow, stunning condition, 2013 £11,500

KVERNELAND LD 85 plough 6f, No 9 bodies, man variwidth, c/w hyd release press arm, transport wheel, exceptional, vg paint £12,250

GREGOIRE BESSON plough 5f, manual vari-width, rear disc, very straight & tidy, good, solid plough, AR5H boards £5,150

LEMKEN Euro 8 OF 7f on land/in furrow, man variwidth, outstanding ex-farm condition, hydraulic front furrow, 2009 £11,250

KVERNELAND TS tine drill 4m, good drill, new wearing metal, c/w pre-em & following harrow, hydraulic fold, FGS box £9,250

VADERSTAD CRD300 Carrier drill 3m, excellent drill, twin disc, steel ring packer, c/w following harrow £10,250

AVAIL AB L FOR HIREE

Ellis Machinery • Gaydon Farm • Gaydon • Warwick • CV35 0EP 122 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 122

18/11/2015 09:52

AMAZONE box drill 3m, c/w tyre packer, genuine drill, Suffolk coulters, levelling boards £3,500

MONOSEM sugar beet drill 12 row, good drill, hydraulic fold £8,250

VADERSTAD RDA 600 drill 6m, c/w pre-em, following harrow, radar £13,950

KUHN ACCORD drill combination 3m, very nice combi, good wearing metal, maxi packer, Q-ﬁt 2 tines, c/w following harrow £10,250

VADERSTAD 300S drill 3m, c/w very good discs & coulters, 95% tyres, c/w following harrow & pre-ems £10,950

WEAVING tine drill 6m, hydraulic fold, RDS control, c/w following harrow £12,500

KRM Sola drill 7996M good straight drill, new metal, large capacity hopper, hyd fold, following harrow, hyd fan £10,950

KRM tine drill 6m 3 row stagger, wheel eradicators, hydraulic fold, following harrow £10,950

COUSINS V-Form subsoiler 5 leg, good genuine machine, good legs & metal £5,150

McCONNEL Shakaerator 7 leg, brand new, c/w maxi packer, 2015 £8,150

AVAIL AB L FOR HIREE

SIMBA Flatliner 500 very nice subsoiler with Pro-Lift legs & DD packer, good metal £7,650

HOWARD Powervator 3m, very genuine machine, good tines & packer £2,950

KUHN EL201 spiked rotavator 4m, straight tines, c/w maxi packer, nice machine, runs very smoothly £6,750

STRIMECH BK25/76 bucket 7’6”, JCB Q-ﬁt brackets, 2015 £1,675

TIM HOWARD subsoiler 3m, 5 leg, good heavy duty machine c/w new feet £4,950

SIMBA DTX 3m, very good machine, good discs & packer, new leg metal £10,750

STOCKS subsoiler 3 leg, good sound machine, new wearing metal, very good front discs, swivel leg £5,500

PHILLIP WATKINS mole plough good heavy duty machine, new legs, provision for a 3rd leg £6,950

KVERNELAND CTC cultivator 6m, very nice machine, new points and new packer, hydraulic fold £14,950

VADERSTAD Topdown 400 4m, very good machine, good metal, hydraulic fold £19,950

McCONNEL Discaerator 7 leg, new points & shins, very good discs £9,500

SUMO Trio 3m, hydraulic fan, auto-reset, late type removable discs, new feet, good packer, 2010 £10,950

SIMBA 23C discs 4.2m, good heavy duty set, hydraulic front gang angling £9,950

COOPER discs 8’, nice tidy set £1,200

SIMBA 2B disc harrows 3.5m, sound frame, new tyres, hydraulic fold £4,750

COUSINS K125 disc harrows 6m, genuine set, large ﬂotation tyres, good discs, narrow transport width 2.7m, hydraulic fold £4,950

SIMBA disc harrows 3.6m, very nice well cared for discs, good discs, manual fold, rear drawbar £7,950

DOWDESWELL 84 Series rigid discs 3.6m, good genuine set on good discs, hydraulic gang angling £4,500

SOUCHO discs 6m, hydraulic fold for narrow transport width £3,500

AMAZONE ZA-M 3001 spinner very nice spinner, 24-36m, headland control £5,250

HITACHI ZX52U-3 excavator digger 5t, nice digger, rubber tracks, 2 buckets, immobiliser, 3313hrs £16,950

JOHN DEERE 7530 Premium excellent, f/weights, Command centre, Autoquad, only 4981hrs, one owner from new, autotrac ready £37,950

KRM BREDAL trailed spinner twin belt £3,750

JCB 8085 ZTS tracked excavator 8.5t, very nice, quick hitch, 1x16” bucket, rubber tracks - 70%, 2010 £20,750

TMA4 HORSTINE granular applicator 12m, nice machine £5,250

BAILEY ﬂatbed trailer 6t, 20’, 2013 £4,750

WARWICK dropside trailer 3.5t, tipping trailer, 2015 £2,950

MEKANAG drill trailer good low loader trailer to suit 4m combi drill £1,950

KRONE tedder KW882 8.8m, excellent machine, still on original tines, hydraulic fold £7,950

This is a small selection of our machinery... we have over 400 machines in stock

Buy and sell online – www.farmads.co.uk

COUSINS V-Form subsoiler 4.5m, hydraulic fold, good machine, new metal, good razor ring packer £12,500

Photos available via email/post • Delivery can be arranged December 2015 www.farmads.co.uk 123

farmers_guide_class_december_15.indd 123

18/11/2015 09:52

Valtra T151

TRACTORS (cont)

c/w Valtra 65 loader

FENDT 933, 2007, tidy tractor, 8500hrs, 710 rear, 620 front, 60%. £45,000. S Parrish Tel: 07736 433018 (Cambs).

New Holland 7060 Suspension

F44-150B

2013 Valtra T183 Versu

CLAAS ARES 657 ATZ 2006, 4630hrs, 125hp, front linkage, rears 600/65R38 75%, fronts 480/65R28 40%, from small family run farm, excellent condition. £18,500. AR Lavender Tel 07885 294335 (Norfolk) F616

Murphy

Agricultural Machinery

01779 821544

murphy@murphyagricultural.co.uk

www.murphyagricultural.co.uk

01827 880088

sales@startintractors.co.uk(T) JCB Fastrac 185-65, 95 plate, recent complete engine re-build, new clutch & pressure plate, excellent condition for age. P Moody Tel: 07767 673493 (Derbys). JD 900kg block weight, as new. £800. I Brand Tel: 07899 795220 (Lincs). JD2140, AP cab, PUH, W reg, engine 6000hrs. £4,000. A McIntosh Tel: 01793 710286/07778 785326 (Wilts).

McCormick 115

40kph + creep, front linkage, 2008, 4120hrs, 650/65x38 tyres

Startin Tractors Ltd 01827 880088

sales@startintractors.co.uk(T)

MASSEY FERGUSON 6255 2800hrs, 3 spools, new rear tyres, fronts 85%, immaculate for year, 52 plate, front fenders. £16,500+VAT ovno. A Ford Tel 01508 530598/07708 154580 (Norfolk) F687

£13,950+VAT

07973 117993

FENDT reversing camera, only for models pre-2008, to work with the old style screens. GW Harrold & Partners Tel: 07836 751076 (Norfolk).

2009 Deutz M600

POA MARK HELLIER

01580 291271•07836 723944 www.markhellier.co.uk sales@markhellier.co.uk FULL set front end weights to ﬁt 10 Series/40 Series Ford. £500. CE Leadbetter Tel: 07870 293052 (Cambs).

Claas 836 RZ Suspension

CASE MAGNUM 7240

JOHN DEERE 5100M c/w A/C, grass tyres, front linkage, c/w front PTO, double acting spool valve & free flow return, vgc, new March 2010, 4750hrs. £18,000. B Bone Tel 07831 368799/07718 779711 (Herts) F700

1 owner from new, 1995, 40K, 7443hrs, new tyres, full set of weights, very good all round condition. £19,500+VAT.

Tel: 07950 695445 Leicestershire JOHN Deere 6330 c/w JD 633 loader, 2008, 4300hrs, in excellent condition. £31,995+VAT. J Furness Tel: 07973 843230 (Glos).

Massey Ferguson 40 loader tractor

with link arms

c/w LRZ loader, 40kph, 6 cyl nonboost engine, 3300hrs, air con cab c/w pass seat, 520/70x38 tyres

Startin Tractors Ltd 01827 880088

MASSEY FERGUSON 7624 Dyna 6 tractor, 62 reg 1800hrs, Exclusive spec, 710 Michelins, dealer serviced, showroom condition. POA. D Campbell Tel 07850 659973 (E Sussex) F697

F44-154B

Startin Tractors Ltd 01827 880088

sales@startintractors.co.uk(T) JOHN Deere 3140, good tidy tractor, new tyres. £7,600 ono R Booth Tel: 07712 042437 (Lincs).

07767 891328/01702 202930(T) JOHN DEERE 8320 fully equipped, 2002 model, inc A/C, active seat, front suspension, 5 double acting spools, PUH, front linkage, passenger seat & bluetooth, 90% fronts, 70% rears, on our farm since 104hrs & now only 3800hrs. R Blackhurst Tel 07802 858373 (Cambs) F672

MASSEY FERGUSON 7618 Dyna 6 tractor, 14 reg, 750hrs, Exclusive spec, 650 Michelins, dealer serviced, showroom condition. POA. D Campbell Tel 07850 659973 (E Sussex) F696 SAME Jaguar 95, 4wd, star ts & runs OK, needs TLC, nust go. Offers. G Graham Tel: 07846 259920 (Warks). SAME Laser 130, 4wd, been on mixer wagon last 2yrs, needs a bit of TLC, c/w box of spares, tyres 30%, all glass with cab, 30k box. £3,500+VAT. DR Spencer Tel: 07771 517462 (Cambs). F691

JOHN DEERE 6920S 2002, 40k Autoquad, TLS & cab suspension, HMS, air con, air seat, passenger seat, 3 spools, front 540/28 60%, rear 650/38 80%, 8,000hrs, mint. W Halls Tel 07768 178642 (Essex) SAUERMANN 80mm ball hitch, adjustable height type, on railsto fit John Deere 6000/7000 Series tractors, rails & bolts included. A Bentley Tel: 07957 553028 (Norfolk). VALTRA T130, 53 reg, front linkage cab & front suspension, 4 double acting spool valves, good clean tractor. P Moody Tel: 07767 673493 (Derbys).

TRACKS F44-16B

steel track crawler repairs

East Anglia & beyond

07802 308820 01376 328999

MASSEY Ferguson 6499, 56 reg, 5800hrs, very good clean working order, sprung cab, front axle. POA. M Hornbuckle Tel: 07801 101645 (Leics).

£2,800+VAT

JOHN Deere 6930 Premium, 2008, 50kph, Autoquad gearbox, less than 5000hrs, excellent condition. £31,000+VAT. J Furness Tel: 07973 843230 (Glos). JOHN Deere 7530 Premium, 2009, 3200hrs, in excellent condition. £39,995+VAT. J Furness Tel: 07973 843230 (Glos).

MF135, 2800hrs, power steering, very good condition, owned from new, 1997. £2,000. A Prinold Tel: 07967 145543 (Staffs).

sales@startintractors.co.uk(T)

Andrew H Gemmill

passenger seat, 20.8x42 tyres, 2007, 6285hrs, r/wheel weights & f/weights

MASSEY Ferguson 8670, 2010, 2740hrs, 5150 6cyl 8.4L eng, max power 320hp, 50kph, Dyna VT gearbox, air/hyd brakes, f/linkage, 5000kg cap, 715/75R42 r/tyres, 600/65R34 f/tyres, Datatronic & Autoglide ready. £50,000+VAT; full set dual wheels available. PE Seabrook Tel: 07831 834068 (Cambs).

Case IH Maxxum 125

F44-152B

01827 880088

sales@startintractors.co.uk(T)

TOPCON HIPER AG PRO base station, R-West radio, suitable for all Topcon RTK receivers, all cabling & tripod & original box included. Please ring with any questions. GW Harrold & Partners Tel 07836 751076 (Norfolk) F682

F44-33A

Startin Tractors Ltd

JD4040, X reg, new turbo radiator, tyres OK, 9000hrs, 1980, SG2 cab. £2,800. A McIntosh Tel: 01793 710286/07778 785326 (Wilts). JOHN Deere 3720 compact, 2012, hydro, c/w turf tyres, roll bar & JD300CX loader, only 550hrs. D Todd Tel: 07768 553833/01462 813390(T) (Beds).

F44-96B

F44-153B

50kph, 2007, 2420hrs, 800/70x38 tyres, f/weights, 4 hydraulic valves

F44-148B

2002, 4600hrs, Perkins 4cyl turbo engine c/w creep box, 4wd, tyres 100%, v v tidy

Call Stewart on

MASSEY Ferguson 8220, 4wd, Dynashift, 02 reg, approx 5000hrs, front linkage, front suspension, 4 spools, Michelin tyres 80%. P Noble Tel: 07816 477293 (Cambs).

MASSEY Ferguson 6490, Tier 3, 07 reg, Dyna 6, 2950 genuine low hrs, 3 SCV, cab suspension, excellent condition throughout, main dealer service history up to 2400hrs, genuine sale due to upgrade. £32,000. GA Newton Tel: 07970 376838 (Lincs).

Case IH Magnum 225 Suspension

F44-149B

Buy and sell online – www.farmads.co.uk

Longside, Peterhead, Aberdeenshire

FENDT Bill Bennett hydraulic pick up hitch, came off a Fendt 716. GW Harrold & Partners Tel: 07836 751076 (Norfolk).

Startin Tractors Ltd

F44-151B

Apr 2013 facelift, 50K, black metallic, f/cab suspension, approx 3725hrs, 5t f/linkage, f/PTO, hyd PUH, sunroof, 650/65-R42 & 540/65-R30 Michelins, 50-60%, vgc

F44-155B

2010, 3060hrs, trailer air brakes, 520/70x38 tyres, air con cab c/w pass seat

£51,750+VAT

NEW Holland TS115 Special with Trima 280 Professional loader, 2002, black chassis, 4225hrs, very nice condition throughout, recent new front tyres. £22,000. P Hart Tel: 07949 440721 (Cambs).

MARSHALL tractor, 1984, clean & tidy, good engine, had respray, used for grass topping on free range egg farm. £4,250. MG Peirson Tel: 01371 831255 (Essex).

NEW Holland TM155, 2005, 6200hrs front and cab suspension, Range Command, front links, very good condition, £20,000 ono. C Dening Tel: 07813 004395 (Somerset). TRACTOR 3pt linkage road grader, reverse for snow plough, excellent condition. £200. B Lundy Tel: 01472 851613/07974 009267 (Lincs).

CAT/CLAAS 35/45/55 pair of tracks, 85% good only done 250hrs, 20” wide, vgc, barn stored, good saving on new. £4,500+VAT. H Hutsby Tel: 07917 130213 (Warks).

Buy and sell online

www.farmads.co.uk

124 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 124

20/11/2015 11:44

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

Tractors Ltd

12C34B

12C02A

formerly trading as Landscape Machinery Hire

AGRICULTURAL MACHINERY HIRE & SALES

HIRE SALES SERVICE PARTS

All prices + VAT

TRACTORS

Case STX485 2009, 4500hrs, linkage........................................................ £90,000 Used Case STX450, 2003, 7,000hrs, linkage & PTO ................................ POA McCormick X7.660 tractor, 165/175hp, 50k, 600/65R38, 480/65R28 ....... POA

NEW MACHINERY

SMALLHOLDER, EQUESTRIAN, LIVESTOCK, GROUNDCARE

New Ritchie 385 bottomless ring feeders .................................................. New Ritchie tombstone ring feeders 389G................................................ New Ritchie cattle hurdles, 3m, Pt no 1045G ............................................ New Ritchie galvanised gates 8’ to16’.......................................................

USED MACHINERY

Vicon bale wrapper, Lupton engine ........................................................... Used New Holland BR750A baler, 2006, approx 15,000 bales gc ............ Used JF-Stoll GXF 3205P front mounted mow cond, 3.2m, 2010, gc ...... Used JF-Stoll GXS 3205P rear mounted mow cond, 3.2m cut, 2011, gc.

£4,250 £8,500 £3,950 £4,250

Authorpe, Nr Louth Lincs LN11 8PF 01507 451950

James Hunt 07789 066688

Swinhope Depot, Market Rasen, Lincolnshire LN8 6HT

www.bandbtractors.co.uk

Bailey 16t Beeteaper air brakes, easy sheet, grain chute, hydraulic door, mudguards/flaps, available September ............................................................ POA Warwick 12T 28’ bale, 2014, chequer plate floor, sprung draw bar, Led light, 385 super singles, front head board & hay ladder, ex demo, as new ............£7,850 New Bailey 19t low loader 26’, bale wedge, air/hyd brakes, hyd ramps........... POA Bailey 14t Root Special 2012, LGP tyres, hyd door, mud guards/flaps, sheet, chute, full width front arched window, LED lights, 3’9” sides, excellent ............ POA Bailey 15t Root Special 2011, 560 tyres, hyd door, sprung drawbar, full width front window, easy sheet, full factory respray new plastic mudguards ............ POA.

OTHER Timberwolf 150 VTR tracked chipper, 2012, 550 hrs, excellent condition, Vari-Track ....................................................................................................... POA Timberwolf 150 HD fast tow, 2011, 775hrs, good condition ........................... POA Tajfun 2015 wood processor, ex demo ........................................................... POA Spearhead 620 batwing rotary topper, 2012, only ever used on grass ........... POA. Ballast roller 6’, vgc ...................................................................................... POA Used Wessex Country 1.2m rotorvator, like new ........................................... POA. Tanco 280 ARC round bale wrapper, 2008, RDS expert controller, auto wrap, tie & cut, 1.2-1.5m diameter bales, 750mm ﬁlm dispenser, extendable axles, standard bale ramp with accumulator, road lights, side load or stationary use, hardly been used, very low bale count, excellent condition ..........................£6,250 Kuhn Haybob 300 twin rotor, as new, used to do 1.5 acres last year, always stored inside ..............................................................................................£1,925

(Bedfordshire)

Callam Overy 07769 706508

07768 553833

Visit our website to see all our stock with pictures

www.mktractors.com

All prices +VAT

“Anything Agricultural”

2010 MF 5460 DYNA 4 tractor, front & cab suspension, air brakes, MF 945 power loader, immaculate

1989 FORD 7810 SUPER Q Series 2 tractor, 16.9x38 & 14.9x24 wheels

2011 ISUZU DENVER MAX RODEO leather, sat nav, tyres as new, MOT Sept 2016,100k miles

1980 MF 4260 tractor, 18 speedshift, A/C, 16.9x38 & 13.6x28, no weights

2000 BAILEY 14T ROOT TRAILER hyd door, sprung drawbar, rollover sheet

2014 STEWART GX16-21L 16t trailer, air brakes, rollover sheet, Nokian 560/60x22.5, s/ drawbar, immaculate

BERTHOUD FORCE 12 12m sprayer, hyd booms, electric controls, triplex nozzles

POWERMATIC CPO 600 oil fired 3ph workshop heater, 176kw/609000Btu, Powrtrol controls, 5000L tank available

1991 FORD 6810 2WD SERIES 3 tractor, AP cab,13.6x38 rear wheels, good runner

Carrier, new discs, levelling boards £23,850 50017441

2007 VADERSTAD TD300

2009 VADERSTAD CR650

Top Down, reduced price, nearly new system disc £17,950 30015916

plough, 7 furrow, W52 bodies £16,000 30012589

TRAILERS

2009 VADERSTAD CR500

drill, wheel press, 506ha, system disc £41,000 10017710

2009 LEMKEN VARI-TANSANIT

John Deere 6190R 2014 (14), 1350hrs, Autotrack Ready, 4 electric spools, 50k, AutoQuad, PowerGard Warranty, ............................................................ POA John Deere 3720 compact, 2012 hydro, c/w Turf tyres, roll bar and JD300CX loader only 550hrs ......................................................................................... POA

01462 813390

Your local Vaderstad dealer for North & Mid Lincolnshire

2010 VADERSTAD RDA400S

TRACTORS

Carrier, new discs, good condition £26,000 10017348

SEE NEW WEBSITE FOR MORE PICTURES & OTHER STOCK email: dasservices@btconnect.com website: dasanythingagricultural.co.uk

1991 DOWDESWELL DP120S

Dealer for Sales, Parts & Service

plough, 6 furrow, £5,700 10017497

12C27B

act

nt Co

£180 £280 £85 £63

TRAILERS

Buy and sell online – www.farmads.co.uk

New Ritchie Traileyre, 10/20’, 10 square, 20 round bale chaser............... POA New McHale V660 round baler, c/w brakes .............................................. POA New McHale V640 round baler, c/w brakes & crop roller ......................... POA New Quicke round bale spike (no brackets) ............................................. £295 New Pottinger Synkro 4030T Nova cultivator, c/w knife packer, depth wheels, brakes ................................................................................. £24,000 New Teagle Berti TBM270 HD flail mower ................................................. £4,500 Demo Pottinger Servo 35S 5f plough, man vari 46w bodies, rear disc, mid wheel......................................................................................... £14,560 New Quicke Q46 loader, parallel linkage, soft ride, multi coupler, McCormick X60 brackets ................................................................ £5,500 New McHale 691BH baler handler, c/w euro brackets.............................. £745 McHale C460 straw blower, trailed ............................................................ POA McHale C360 straw blower, mounted........................................................ POA Versatile DT 550, 2015, 200hrs .................................................................. POA Versatile 260, 2015,150hrs ......................................................................... POA Yamaha 550, 450 and 350cc quad bikes .................................................. POA

BAILEY

Main Dealer for 12C53B

Scott Lea: 07500 787019

Tel: 01522 754733 Dean: 07836 680004 Peter Scott: 07584 066866

TRAILERS

December 2015 www.farmads.co.uk 125

farmers_guide_class_december_15.indd 125

19/11/2015 11:16

www.harrisontractors.co.uk New Machinery

Pottinger Terradisc 5001, 5m trailed, levelling tines, pack ring roller ........................................................................................................................................POA Pottinger 45S Plus, 5 furrow plough, new & ex demo, hydraulic vari-width, 46 WD bodies, rear disc, large depth/transport wheel ...........................................POA Pottinger Synkro stubble cultivator, 3m, 3 rows of tines, mixing discs, pack ring roller .............................................................................................................POA Pottinger Lion 6m, powerharrow, hyd fold, 500mm tooth packer, quick fit tines .......................................................................................................................POA Pottinger Vitasem ADD drill & Fox disc cultivator, 3m box drill, pre em markers, bout markers, double disc coulter, with pack ring roller, only done 500 acres, as new (can also be mounted on power harrow).....................................................................................................................................................................POA Warwick 14t Fastmaster trailer, hyd door, air & oil brakes, roll over sheet, ABC, load sensing, full spec, 560 flotations tyres, choice of blue or JD green .... £16,950 (NEW) INO Euro 2.8m, hyd side shift, hammer flails, front or rear mtd, rear roller ............................................................................................................... £5,250 (NEW) INO Elite 2.7m, hyd side shift, hammer flails, rear roller .......................................................................................................................................... £4,350

Used Machinery

John Deere 6930 50k, 2009, 5400hrs, air brakes, TLS, Autoquad, cab suspension, 20x38, 16.9x28, very nice ................................................................ £33,750 John Deere 6830, 2009, 8900hrs, 40k, TLS, Autoquad, cab suspension, autotrac ready, 20x38, 16.9x28, very tidy for the hours ..................................... £24,950 John Deere 6920S, 2003, 5000hrs, TLS, 40k, Powerquad, front linkage & PTO, air con, air seat, 20.8x38 50%, 16.9x28 20%, one owner........................ £24,750 John Deere 6920S 50k, 2004, 6500hrs, TLS, Autoquad, air brakes 650x38, 540x28, average.......................................................................................... £21,750 John Deere 6620, 2005, 6400hrs, TLS, Powerquad, 40k, air con, air seat, passenger seat, 20.8x38, 16.9x28, tidy tractor ............................................... £20,750 John Deere 6420S, 2006, 6500hrs, Chiltern loader, Autoquad, 40k, air con, 18.4x38, 16.9x24, very tidy from arable farm ............................................... £23,450 John Deere 6420S, 2004, 5100hrs, Powerquad, 40k, air con, 18.4x38, 16.9x24, very tidy .............................................................................................. £18,750 John Deere 6310, 2001, 5000hrs, Quicke Q950 loader, Powerquad, 16.9x38, 14.9x24, very clean from arable farm ........................................................ £19,950 New Holland T6080, 2009, 50k, 4700hrs, Power Command, air brakes, 20.8x38, 16.9x28, nice tractor ........................................................................... £29,750 New Holland TS125A 2004, 4900hrs, dual power, left hand shuttle, 40k, cab suspension, air con, 18.4x38, 14.9x28 25%, tidy tractor............................. £18,750 New Holland TM 120, 2006, 5500hrs, Range Command, 40k, cab suspension, 20.8x38, 16.9x28, very nice ................................................................... £21,250 Case 5140, 1995, N reg, Chilton loader, powershift, 40k, air con, tidy ................................................................................................................................ £9,950 Landini Legend 115, 2000, 1800hrs, W reg, 40k, air con, manual shuttle, front weights, new clutch & syncros, 420/85/38, 34/85/28 90%, fair order ...... £11,250 John Deere 4400 telehandler, 1996, genuine 2966hrs, joystick, hydraulic locking, 202 wheels, one owner, from local arable farm, mint condition ............ £11,450 Manitou MT 728, 1997, 3800 genuine hours, 7m, 2.8t, 20” wheels, very tidy .................................................................................................................. £13,250 Merlo P28.7 EVT, 2000, 11000hrs, cone & pin headstock, pick up hitch, new tyres, tidy .................................................................................................... £9,750 Kubota TG1860, 54” deck, large box collector, 18hp 3 cylinder diesel engine, power steering, very well looked after, mint condition ................................... £3,250 AS Marston 14 trailer, sprung drawbar, super singles, roll over sheet, tidy .......................................................................................................................... £6,950 Warwick 14t trailer, sprung drawbar, hydraulic door, Michelin 560/22.5 floatation, tidy ....................................................................................................... £7,950 AS Marston 8t trailer, lift off sides, sprung axles, lights, grain chute, from small farm ......................................................................................................... £2,450 Dowdeswell MA 120 5 furrow plough, DD bodies, hyd front furrow, tidy............................................................................................................................. £2,250 Vogel & Noot 5 furrow plough, slatted bodies, rear disc, very tidy ...................................................................................................................................... £2,450 Twose 12.4m rolls, 22” rings with breakers, tidy ................................................................................................................................................................ £4,950 Simba double press, 5.5m, DD rings, leading tines, good order .......................................................................................................................................... £6,750 Cousins 3leg V form, 2.5m, 610mm packer roller, very tidy ............................................................................................................................................... £4,250 Maschio Jumbo 6m power harrow, 2002, hydraulic packer roller, hydraulic fold, quick-fit tines, tidy ................................................................................... £8,450 Maschio DM 4000, 4m powerharrow, quick-fit tines, packer roller, choice of 2002, 2007 ........................................................................................... from £3,950 Stocks dual wheels 580x38 & 20.8x38, with clamps, 80% tread ................................................................................................................................ £1,250 a set

Tel: 07768 171085 March • Cambs

12C23B

Buy and sell online – www.farmads.co.uk

HARRISON TRACTORS Ltd

Email: harrisontractors@fsmail.net Photos & more at: www.harrisontractors.co.uk

126 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 126

18/11/2015 11:08

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138 We specialise in the sale and sourcing of used agricultural machinery Large selection available Please see website or call for more details

UNISTOCK PREMIER cattle crush, c/w electronic weigh scale

07915 669 007

£6 ,9 50 KEN WOOTTON BTC 10 twin axle ﬂatbed trailer, 2010, 25’ length

£3 ,2 50

£1 ,7 50

£5 ,7 50

JCB 412S FARM MASTER loading shovel, 1996, 8550hrs, c/w PUH, toe tip grain bucket, sugar beet bucket

CHAFER T3000 trailed sprayer, 18m boom, 3000L capacity

£4 3, 50 0

£1 ,3 50 FRANQUET SYNCHROSEM 3m cultivator, 1997

£1 2, 75 0

RICHARD KERRIDGE single axle 4t hyd tipping trailer

THWAITES 6T swivel skip dumper, 1998, c/w Perkins 4 cyl engine, power shuttle transmission

HYUNDAI ROBEX 145 LCR-9 zero tail swing excavator, 2013, 1860hrs, c/w Geith hyd quick hitch, rear camera, A/C

All prices + VAT

12C46B

sales@lbgmachinery.com • Boxford Suffolk

3 Years Interest-Free Finance Available On All New Väderstad Machinery

01223 870016

Buy and sell online – www.farmads.co.uk

ROLLAND SUPER CONIC 2100 4t muck spreader, c/w spinning discs, slurry door & ﬂotation tyres

FIAT AGRI 80-90 2wd tractor, 1985, 4333hrs, c/w Quicke 3380 System US front loader

£4 ,8 50

£5 ,5 00 FORD 7600 2wd tractor, c/w power steering, drawbar, one double acting spool valve, front weights

Limited

£2 ,3 50

£2 1, 00 0 MERLO PANORAMIC P40.7 telehandler, 2009, 6000hrs, c/w Matbro hyd locking headstock, 40K, Deutz turbo engine, air seat, A/C

£1 ,8 50

FORD 7840 SLE 4wd tractor, 1994, 6000hrs, c/w A/C, PUH & front weights

£5 ,2 50

HONDA FOURTRAX TRX420TM 20cc 2wd quad bike, 2007, 427hrs

BOMAG 135AD-3 double drum vibrating roller, 2003, 2145hrs

Tractors and Machinery • Bought & Sold

£8 ,5 00

£3 ,2 50

www.lbgmachinery.co.uk

Refurbished VÄDERSTAD Machinery Available Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad

RD RD RDA RDA RDA RDA RDA RDA RD RDA RDA RDA RDA RDA RDA RDA RDA RDA RDA NZA RST RST RST RST RST

300S Drill 2004 400F Drill 2001 400S Drill 2002 400S Drill 2004 400S Drill 2008 400S Drill 2009 New Type Hopper 400S Drill 2011 New Type Hopper 500S Drill System Disc 2002 600F Drill System Disc & System Tine 600S Drill 2002 600S Drill 2004 Refurbished 600S Drill 2008 600S Drill 2009 New Type Hopper 600S Drill 2010 New Type Hopper 600S Drill 2015 New Type Hopper Ex-Demo 800S Drill 2002 800S Drill 2004 800S Drill 2007 800C 8m Offset Grain & Fertiliser Drill, 2011 600 6m Cultivator Ex-Demo 450 Twin Press Refurbished 550 Twin Press Ex-Demo 630 Twin Press Ex-Demo 830 Twin Press 1030 Twin Press 2011

Church Road, Hauxton, Cambridge CB22 5HS

Väderstad Roller RS10-20 Heavy Duty New Machine Väderstad Roller RS650 c/w Crossboard Ex-Demo Väderstad TopDown TD 400 Ex-Demo Väderstad TopDown TD 400 Refurbished Väderstad TopDown TD 500 Refurbished Väderstad TopDown TD 600 Refurbished Väderstad Carrier CR500 Steel Rings Väderstad Carrier CR500CB, Steel Rings, Cross Board Väderstad Carrier CR650CB, Steel Rings, Cross Board, 2012 Väderstad Carrier CR650CB, Steel Rings, Cross Board, 2015 Ex-Demo Väderstad Carrier CR650 Steel Rings Väderstad Carrier CR925, 2012 To be Refurbished Väderstad Drill 900L Hopper Extension Väderstad Rear Drawbar to fit Top Down Väderstad Carrier Tines & Crossboard to fit CR500 Väderstad Rexius RS 12.3m Roller Gregoire Besson Discordon 6.6m cultivator Yamaha Grizzly 450 Quad Bike £5,000 Auger to fit Väderstad Drill Sutton 90L Industrial Vacuum Knights Triple Press 6.6m Wide, Tines c/w Packer John Dale 8m Direct Drill 2010 Horsch Pronto 2009 6m Cousins 12.3m Sidewinder Rolls c/w Breakers Cousins 12.3m Rolls Plain Cambridge Rings 12C32B

www.cambridgefarmmachinery.co.uk December 2015 www.farmads.co.uk 127

farmers_guide_class_december_15.indd 127

20/11/2015 09:40

OVER 50 YEARS EXPERIENCE

LARGE SELECTION OF QUALITY USED MACHINERY

Visit www.jbrockandsons.com

Buy and sell online – www.farmads.co.uk

Woodhams Farm, Cutlers Green, Thaxted, Essex, CM6 2RH Telephone 01371 830353 Email info@jbrockandsons.com Visit www.jbrockandsons.com

JOHN DEERE 7710 4wd tractor, 1998, 10720hrs, c/w front linkage, good 710 tyres, reasonable condition for hours ......................................... POA

JOHN DEERE 2140 4wd tractor, 1984, 8985hrs, c/w SG2 cab, air con, rear PUH, 3 spools, straight condition.................................................... £6,450

DOWDESWELL DP7D2 5f (4+1) mounted 12” plough, c/w good UCN bodies, skims, rear disc, tidy condition.................................................... £4,250

KVERNELAND RG100 8f semi mounted on-land/ in-furrow plough, c/w very good No 8 bodies, hyd variwidth, tidy ............................................... POA

KVERNELAND LD85-200 5f mtd plough, manual variwidth, No 9 bodies, hyd release press arm, tidy condition.................................................... £9,500

GREGOIRE BESSON RW7 6f (5+1) mounted plough, hyd variwidth, good AR5 bodies, tidy condition.................................................... £9,800

MISC-AG mounted twin leg mole drainer, c/w 3 wheels each side, good wearing metal, straight condition.................................................... £3,750

BOMFORD Powertrac 12’ with 15 Lo-Draft tines, ﬁtted with 700mm DD ring press, good condition.................................................... £5,250

HEVA 3m 5 leg mounted subsoiler, c/w hydraulic steel ring rear packer, good condition with new points ........................................................ £5,450

TWB 4.5m 7 leg mounted subsoiler, hydraulic fold, c/w tooth rear packer roller, new wearing metal ......................................................... £8,750

SIMBA Unipress 4.6m, 2002, c/w Proactive tines, hydraulic levellers, 700mm DD rings, ex farm condition.................................................... £7,750

SIMBA 6.6m trailed DD single press, c/w 700mm rings, 2004, tidy condition.......................... £9,500

FARMFORCE Disc Leader 4m trailed folding press, c/w 2 rows discs, double row cast rings, straight condition.................................................... £9,750

SIMBA Cultipress 5.5m, c/w rigid tines, hydraulic levellers, 2003, good DD rings, rear drawbar ................................................... £11,750

SIMBA Cultipress 6.6m c/w rigid f/tines, hyd levellers, 600mm DD rings, 2001, straight condition.................................................. £14,500

SIMBA Cultipress 10m trailed double press, 2008, c/w Proactive tines, hydraulic levellers, very tidy .......................................................... £37,500

MISC-AG 5m mounted pigtail cultivator, c/w steel depth wheels, end tow kit, strong build ....... £1,450

SIMBA Toptilth 8m trailed springtine, c/w f/levellers, 2 rows packers, reasonable condition....... £10,750

SIMBA Toptilth ll 3.5m trailed springtine, c/w f/levellers, 2 rows packers, good straight condition.................................................... £3,950

KOCKERLING PC 4m trailed stubble cultivator, 2004, c/w double STS packer & harrows, hyd fan seeder, f/depth wheels.................................... POA

KUHN HR5004 5m mounted power harrow, hyd fold, 2009, c/w tooth packers, untidy looking but sound condition ......................................... £7,500

WIBERG Bastant 860 8.2m trailed springtine cultivator, c/w mid levelling board, double Reekie rear harrow ................................................ £7,800

FARMET Kompaktomat K600 PS llA 6m trailed, excellent seedbed preparation tool, c/w front & rear crumblers ...................................................... POA

QUIVOGNE 6m trailed springtine cultivator, c/w f/packer, spike roller, levelling board & rear ﬂexicoil ...................................................... £7,450

SEE MORE PICTURES: scan this code with your smartphone or visit our website: www.jbrockandsons.com

SUMO Trio 3AR 3m 6 leg auto reset subsoiler, c/w 2 rows removable discs, Multipacka, Sumo seeder, 2010 ............................................ £13,950

KNIGHT Goliath 5m, c/w f/roller 4 rows hyd adjust sprung tines, deep tines, sprung levellers & rear shouldered packer.................................... £17,950

KNIGHT EU3000 24m trailed tracking sprayer, 2 sets wheels, induction hopper, recirculation, 6 section booms, hyd boom tilt ................ £14,750

128 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 128

18/11/2015 09:36

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

pment range of equi r the Farmet fo on s er as rt se po is for th the direct im requirements We are now discuss your to ll ca e as Ple

COUSINS Contour 9m hydraulic folding articulating rolls, c/w good 24” plain rings, repainted .... £7,800

KUHN/ACCORD HR4002/DA-S 4m mtd combi drill, c/w Suffolk coulters, pre-em markers, rear step ........................................................... £6,850

SIMBA Freeﬂow 4m trailed grain drill, 1998, c/w Otico f/roller, good coulters, rear harrow & pre-em....................................................... £5,250

VADERSTAD Rapid 400F 4m trailed grain drill, system disc, cleated tyre packer, 2001, tidy condition.................................................. £12,750

VADERSTAD Rapid 800P 8m trailed grain drill, system tine, ribbed tyre packer, front depth wheels, straight ...................................................... £8,750

KV/ACCORD Tineseeder 4m mounted grain drill, c/w ESC controls, hyd fan, 2007, following harrow, 4 rows coulters .......................................... £8,950

KV/ACCORD Tineseeder 6m mounted grain drill, 2008, c/w hyd fan, rear harrows, straight condition.................................................. £12,750

COUSINS Contour 18.3m horizontal folding rolls, 2012, c/w very good 24” plain rings, very tidy condition ........................................£26,750

TRACTORS & CRAWLERS

JOHN DEERE 6900 4wd tractor, 1996, 8780hrs, front weights, 40k powerquad JOHN DEERE 7530 4wd tractor, 2009, 4300hrs, TLS & cab sus, 40k AutoPowr JOHN DEERE 8210 4wd tractor, 2001, 4863hrs, rear PUH, very tidy condition McCORMICK MTX150 4wd tractor, 2004, 9500hrs, f/linkage & PTO NEW HOLLAND T8030 4wd tractor, 2007, 7000hrs, f/linkage & PTO

FORKLIFTS

MANITOU 626 telescopic handler, 1993, 4177hrs, ex farm condition MERLO 40.7 Turbo Farmer, 2012, 2400hrs, c/w boom suspension, v tidy

PLOUGHS

DOWDESWELL DP1 7f (6+1) 16” mtd plough, c/w CAT offset, UCN bodies, tidy DOWDESWELL DP100 4f (3+1) mtd plough, c/w SCN bodies, press arm DOWDESWELL DP120S 5f (4+1) mtd plough, man variwidth, good UCN metal DOWDESWELL DP7 D2 14” & 12” mtd ploughs, DP7E 6f, choice in stock GREGOIRE BESSON HRP B7 6f on-land/in-furrow mtd plough, 2003, tidy GREGOIRE BESSON HRP B9 6f on-land mtd plough, 1997, manual variwidth GREGOIRE BESSON RWB7 5f mtd plough, 2007, c/w hyd variwidth, tidy GREGOIRE BESSON SPEL B9 9f semi mtd wagon plough, on-land/in-furrow GREGOIRE BESSON SPLW B9 8f semi mtd on-land/in-furrow plough, 2008 KUHN Multimaster 153 5f (4+1) mtd plough, 2013, auto reset, very tidy KVERNELAND ED85-300 6f mtd auto reset plough, c/w manual variwidth, tidy KVERNELAND EG85-300 6f (5+1) mtd plough, c/w auto reset, new No 28 boards KVERNELAND LB85 & LD85-240 or 200 5 & 6f mtd ploughs, choice in stock KVERNELAND LF85-240 6f mtd on-land plough, c/w hyd variwidth, straight KVERNELAND PB100 6f semi mtd plough, auto reset, No 8 bodies, man variwidth KVERNELAND PB100 7f semi mtd auto reset plough, 2007, new No 28 bodies KVERNELAND RG100 7f semi mtd on-land plough, hyd variwidth, No 28 bodies KVERNELAND RS115 7f (6+1) semi mtd on-land/in-furrow plough, No 8 bodies KVERNELAND RT100 14f semi mtd on-land/in-furrow plough, c/w Packomats LEMKEN Vari-Opal 8 6f (5+1) mtd plough, 2010 c/w BS25 slatted bodies

HEAVY CULTIVATION

COUSINS Level Lift 3.5m 7 leg mtd subsoiler, c/w fert tank & rape seeder COUSINS V Form 2.5m 3leg mtd subsoiler, c/w rear crumbler, f/depth wheels FLEXICOIL 3.2m trailed cast ring double press, c/w leading tines, hyd levellers FLEXICOIL/NRH 4m trailed double press, c/w leading tines & hyd levellers GREAT PLAINS Simba 10m Cultipress, 2013, c/w auto lube, very tidy GREGOIRE BESSON Discordon 3.2m, c/w good discs, rear Emopak, straight HEVA 4m 7 leg mtd subsoiler, hyd folding, c/w new legs, hyd steel ring packer HEVA Combi-Lift 4m 8 leg mtd subsoiler, hyd fold, c/w f/depth wheels, 2008 HEVA Disc Roller 5m trailed, c/w 2 rows hyd adjust discs, steel ring packer HEVA Sub Tiller 4m rigid mtd auto reset subsoiler, steel ring packer, c/w seeder HORSCH FG 12.3m stubble cultivator, c/w rear d/bar, 3 row following harrow HORSCH FG 4.5m trailed stubble cultivator, c/w following harrows & rear d/bar HORSCH FG 6m trailed stubble cultivator, c/w following harrow & rear d/bar KNIGHT Raven 2.8m 3 leg combination subsoiler, c/w hyd packer, 2011 KVERNELAND CTS Stubble F 4.5m primary cultivator, 2005, Razor ring packer LEMKEN Rubin 9/600 6m trailed disc press, c/w DD Lite packer, 2006 LEMKEN Smaragd 6m trailed Terradisc cultivator, c/w double rear crumblers MICHAEL MOORE 4m trailed double press, forward folding, wheel eradicators MICHAEL MOORE Hi-Rider single leg trailed mole drainer, tandem axle MICHAEL MOORE Hi-Rider twin leg trailed mole drainer, tandem axle MICHAEL MOORE Multipress 6.4m, c/w rigid leading tines, hyd levellers MILES Hi-Riser single beam single leg trailed mole drainer QUIVOGNE Jupiter 630 6.3m trailed stubble cultivator, 2010, rear harrow SIMBA 4.6m trailed cast ring single press, hydraulic fold SIMBA 5.5m Cultipress, rigid f/tines, hyd levellers, 600mm DD rings, 2001

AMAZONE ZA-M ProﬁS SPS 3000 mtd fertiliser spreader, 2009, Amatron+, immaculate condition ............................................£6,750 SIMBA 5.5m DD double press, hyd fold, 1998, c/w rear d/bar, good rings SIMBA 6.6m Cast ring double press, hyd fold, straight condition SIMBA 6.6m Cultipress, c/w rigid f/tines, hyd levellers, 600mm DD’s 2002 SIMBA Flatliner 500 3.8m 5 leg subsoiler, c/w DD packer, 1997, straight SIMBA Flowking 3.5m 5 leg subsoiler, c/w packer roller, repainted, new metal SIMBA Tool Carrier Mk 5, very tidy condition TAYLOR GENT Flatlift 3m 5 leg mounted subsoiler c/w HD Depth wheels TWB 3.5m 5 leg mtd subsoiler, c/w tooth packer, working tines, 2010 TWB 3.8m 5 leg subsoiler, c/w new Tim Howard legs, rear packer roller TWB 3m, 3.5m & 4.5m 3 to 7 leg mtd subsoilers, choice of packers, unused TWB 4.5m & 6m 7 to 11 leg trailed subsoilers, c/w working tines, new & unused TWB 4m 8 leg mounted Tinebar, c/w hydraulic rear linkage, new & unused TWB 6m 9 leg trailed subsoiler, c/w double shouldered ring packer TWB Magic Mole trailed single or twin leg mole drainers, new & unused TWB Terminator 3.25m primary cultivator, 2 rows discs, HD tines & packer VADERSTAD Rexius RX650 6.5m steel ring roll, c/w Crossboard levellers, 2009 WEAVING Subdisc 3m 7 leg combination subsoiler, c/w Guttler packer, 2012

SEEDBED PREPARATION

BECKER Optimator 6m trailed springtine, c/w f/& rear crumbler rollers BLENCH 8.5m mtd pigtail, hyd fold, c/w new points, 2 steel depth wheels BOMFORD 6.2m mtd pigtail, hyd fold, c/w steel depth wheels BOMFORD Supaflow 4m mtd rigid tine cultivator, steel depth wheels BROWNS 12’ C tine cultivator, c/w steel depth wheels, straight CELLI Maxi 400 4m mtd power harrow, c/w bolt-on tines, 2010, unused COUSINS Dutch Harrow 5m mtd, hyd fold, c/w f/boards, rear coils, tidy DALBO Cultilift 800 8m mtd springtine, c/w f/levellers, rear crosskills, 2012 DOWDESWELL Powervator 130 with SR rear ridger bodies, 1999, straight FARMFORCE 10.5m trailed springtine, c/w f/& rear crumblers, wide transport FARMFORCE 4m rigid front mounted steering press, c/w solid flexicoil FLEXICOIL 6m f/mtd steering press, c/w tooth packer, leading tines, tidy GALUCHO Tilthmaster TMR350 3.5m springtine, c/w 2 rows packers, f/leveller HAYLOCK 6m mtd pigtail cultivator, 4 rows tines, ex-farm condition KONGSKILDE Germinator 5m trailed springtine, f/& rear crumblers, tidy KONGSKILDE Vibroflex springtines: 3.2m man fold, 3.8m, 4m & 5.5m hyd fold KONGSKILDE Vibromaster 5.9m Triple K, depth wheels, f/levellers, rotocrats KRM/SUMO Ripper 4m rigid mounted rigid tine cultivator, c/w rear d/bar KUHN HR4002 4m mtd power harrow, c/w tooth rear packer, straight KVERNELAND Combinator ll 5m mtd springtine, hyd fold, 2 rows crumblers LYNX 3m front mtd press, hyd fold, c/w good 45 degree rings, poor paint MASCHIO Aquila 5m hyd fold mtd power harrow, 1998, c/w tooth packer MF 305 6m mtd 4 row HD springtine, hyd fold, 4 rubber depth wheels MF 768 4m rigid mtd power harrow, c/w flexicoil roller, track eradicators MISC-AG choice of furrow presses 100”, 110”, 130” & 142” SIMBA 4m f/mtd steering press, hyd fold, c/w 2 rows levellers, 550mm DD rings SUMO 1.5m front tyre packer with 4m front tine bar, manual fold SUMO 3.5m Front Disc Unit, c/w f/depth wheels, 2 rows discs, steering VADERSTAD NZF 6m trailed springtine, c/w f/levelling board, rear harrow WEAVING 6m mtd stubble rake, hyd fold, c/w ACCORD hopper with 16 outlets

DISC HARROW

QUIVOGNE APX 4.8m trailed horizontal fold discs, blades are getting down QUIVOGNE APX TL 3.6m trailed disc harrows, c/w good/new blades, tidy QUIVOGNE APX TL 4m horizontal fold discs, c/w good blades, rear d/bar & hyds SIMBA 23C 4.4m trailed disc harrows, c/w good blades, hyd lockdown SIMBA 23C 5.4m disc harrows, hyd lockdown, hyd f/gang angling, rear d/bar

ROLLS

BATES 8.2m hyd fold contour rolls, c/w 22” plain rings, straight condition

KEN WOOTTON 16t tandem axle grain trailer, c/w hydraulic tailgate, s/singles, hyd brakes, rollover sheet, 2010, v tidy ..................£12,500 COUSINS Contour 6.4m hyd fold articulating rolls, c/w 22” plain rings, tidy COUSINS Contour 6.4m hyd fold rolls, c/w 22” plain rings, straight COUSINS Sidewinder 6.3m horizontal fold rolls, c/w 24” plain rings, straight COUSINS Sidewinder 9.3m horizontal fold rolls, c/w 24” plain rings, tidy MISC-AG 6.5m horizontal fold roll, c/w good 22” plain rings, straight TWOSE 6.6m hydraulic fold rolls, c/w very good 22” breaker rings, tidy TWOSE 6.6m hydraulic fold rolls, c/w very good 22” plain rings, sound frame TWOSE 7m horizontal fold rolls, c/w 20.5” breaker rings, straight condition TWOSE 8.2m horizontal fold rolls, c/w good 24” plain rings, tidy condition VADERSTAD Rexius RS1020 HD 10.2m folding rolls, Crossboard levellers, v tidy VADERSTAD Rollex 820 8.2m rolls, c/w Crosskill rings, Crossboard levellers

DRILLING TACKLE

ACCORD Optima 12 row mtd maize drill, c/w ACCORD DF2 f/fertiliser hopper HORSCH CO6 6m grain drill, 2000, c/w radar metering, blockage sensors HORSCH CO8 8m grain drill, 1999, c/w Duett coulters, blockage sensors HORSCH Pronto 6DC 6m trailed grain drill, 2008, good wearing metal HORSCH Sprinter 4ST 4m trailed grain drill, 2005, radar, blockage sensors HORSTINE Air Stream mtd fert distributor, 2011, c/w 6 outlets, radar metering KRM Maxidrill SR 4m mtd grain drill, springtines, rubber packer, disc coulters KRM Roger MR305 4m mtd grain drill, 3 rows coulters, rear harrow, man fold KRM Soladrill 799 6m mtd tine drill, 2008, c/w f/cultivation bar, straight KUHN HR4003/DF1 4m mtd combi drill, hyd fold ,c/w suffolk coulters, 2003 KV/ACCORD DT 8m mtd grain drill, c/w end tow, suffolk coulters, good harrows KV/ACCORD TS Evo 6m mtd grain drill, 2009, c/w rear press wheels, tidy LELY Polymat 3m mtd piggyback drill, c/w 3 row suffolk coulters, tidy LEMKEN Solitair 10/Zirkon 10 6m trailed combination disc drill, 2005, tidy SIMBA Freeﬂow 6m trailed grain drill, 1996 f/& rear tyre packer, straight VADERSTAD Concorde 8m trailed grain drill, c/w 2 row levellers, 4 row coulters VADERSTAD Rapid 300C 3m trailed grain/fert drill, 2004, very tidy VADERSTAD Rapid 300S Super XL 3m trailed grain drill, 2004, system disc VADERSTAD Rapid A400S 4m trailed grain drill, system disc, new rear discs VADERSTAD Rapid A600S 6m trailed grain drill, 2007, new system discs, tidy WEAVING RS5000 4.8m mtd tineseeder drill, 2008, PTO fan, pre-em, tidy

Buy and sell online – www.farmads.co.uk

COUSINS Contour 6.4m hyd fold articulating rolls, c/w good 22” plain rings, repainted, tidy condition.................................................... £6,250

SPRAYERS

ALLMAN 12m 850L mtd sprayer, man fold booms, 1995, induction hopper BERTHOUD Elyte 1600L 24m mtd sprayer, DP Tronic, 2013, very tidy BERTHOUD Major 32 24m trailed tracking sprayer, c/w Axial recirc booms, tidy BERTHOUD Racer 32 24m trailed tracking sprayer, c/w DPA controls, ex-farm HARDI LH800 12m mtd sprayer, man fold, 800L tank, tidy condition HARDI LHY1200 20m mtd sprayer, hyd fold, 1994, induction hopper

OTHER MACHINERY

AS MARSTON Ace 14t tandem axle grain trailer, man tailgate, rollover sheet AS MARSTON BT8 25’ tandem axle bale trailer, steel floor, straight condition BROCK X-Form Grain/dirt buckets to fit JCB/Manitou/Matbro etc. choice BUNNING 12t tandem axle dump trailer, rocking axles, hyd brakes, straight FYSON FE105 Autoswinger 33’ rubber belt elevator c/w 8’ extension KEN WOOTT0N 10t tandem axle grain trailer, man tailgate, rocking axles KRM BOGBALLE M2 mtd fert spreader, 2004, c/w variable rate, tidy KRM BREDAL B2 mounted fertiliser spreader, 2002, tidy condition KUHN Aero 2220 20m boom fertiliser spreader, c/w Microgranular rollers KUHN Axera 1102 H-EMC mtd fert spreader, 2007, hyd drive, very tidy KUHN Axis 30.1 mtd fertiliser spreader, 2006, c/w border limiter, PTO drive MASSEY FERGUSON 228 conventional baler, 1.7m pickup, reasonable order MISC-AG 4m drop down lo loader trailer, c/w steel floor, straight condition MISC-AG trailed mixer bowser, 2500L tank, sprung axles, hyd brakes, very tidy RICHARD WESTERN 11t tandem axle grain trailer, man tailgate, tidy condition

12C42B

December 2015 www.farmads.co.uk 129

farmers_guide_class_december_15.indd 129

18/11/2015 09:36

IFOR Williams trailer, 14’, tri-axle, £1,950; also Ifor Williams, double axle plant trailer, £1,200; double axle wooden trailer, £100. BL Colson Tel: 01284 828251 (Suffolk).

TRACKS (cont)

WARWICK 12t, 28’ bale, 2014, chequer plate ﬂoor, sprung drawbar, LED lights, 385 super singles, front head board & hay ladder, ex demo, as new. £7,850+VAT. D Todd Tel: 07768 553833/01462 813390(T) (Beds).

TYRES & WHEELS FRICTION DRIVE TRACKS

F45-37B

New Hudson Trailer dealer for Essex

Little Hyde Farm, Ingatestone, Essex CM4 0DU

www.dissupplies.co.uk

01277 356881/07754 687983

including used tracks in stock to fit Challenger MT700/MT800 Series BAILEY 16t Beeteaper, 2015, air brakes, easy sheet, grain chute, hydraulic door, mudguard/ﬂaps. D Todd Tel: 07768 553833/01462 813390 (T) (Beds).

2014, 36’ flat bed

F45-70B

BAILEY TRAILER f/w an 18t commercial axle

www.bwt.uk.com info@bwt.uk.com

At BWT we specialise in new and used wheel solutions for Rowcrop, Standard, Dual Wheel & Flotation applications.

FOR HIRE Please phone

F43-08B

07717 755638

POD Agricultural Services for a quote today

BATESON 60L demount livestock trailer, gc. R Statham Tel: 07966 422469 (Staffs).

TRAILERS MARSHALL Trailers stock a wide range of trailers including anything from Grain Trailers to Tankers & Livestock Trailers to Muck Speaders. See them at LAMMA stand B21. Call today on 01224 722777. National. (T)

Enduramaxx water/ liquid bowser

F45-50A

Tel: 01263 711474 sales@eurotrackltd.com www.eurotrackltd.com

Simon Nattriss

Larrington 14 Tonne 'Farmer'

TITAN 33’x8’ bale trailer, turntable, hyd brakes, lights, front & rear ladders, 14t payload, good condition. £2,950 ono. AM Twidale Tel: 07973 412894 (Notts).

FOUR-WHEEL artic trailer, wooden ﬂatbed, good order. £895+VAT. J Furness Tel: 07973 843230 (Glos).

01280 702725 Mob 07799 836590

IFOR Williams DP120G-12, like new condition. £1,800. A Prinold Tel: 07967 145543 (Staffs). TWO-WHEELED tipping trailer. £350+VAT ono. RW Hopkinson Tel: 07976 424263 (Lincs).

01371 832310

MARKET LEADERS

IN AGRI

TYRES

YOUR Agri Tyre and wheel problems

Wheel barrow to Combine we have the answer! OVER 40 YEARS EXPERIENCE BAILEY 16T ROOT SPECIAL December 2012, full width deeper arched window, easy sheet, grain chute, 560/60R22.5 Michelin tyres, air/oil brakes, mud guards & flaps, high spec rare trailer. POA. www.mktractors.com. D Todd Tel 07768 553833/01462 813390(T) (Beds) F561 TRAILERS 3t (2),one wooden with good solid ﬂoor & other steel ﬂoor, bit scruffy. T Noble Tel: 07816 477293 (Cambs).

Merrick Loggin Trailers

Call us now with your requirements

JOHN Deere 6800 wheel rims, 18.4 R38. £150. J Ridley Tel: 07850 138851 (Beds). MICHELIN 540/65 R34 ﬂotation wheels & tyres to ﬁt Bateman sprayer (4), normal agricultural pattern, bought 2013, 95% tread. £3,100 ono. J Church Tel: 07787 563743 (Norfolk).

Let us solve

2014, high spec demo trailer, 560/60R22.5 Vredestein, air/oil brakes, hydraulic tailgate, sprung drawbar, extra lights, flashing LED, painted in Diamond Black, as new condition. more photos and detail at www.writtlefarmmachinery.co.uk

Visit www.loggin.org to see what else we make!

ARTIC 40’ trailer, tested. £2,500+VAT ono. RW Hopkinson Tel: 07976 424263 (Lincs). BAILEY 14t Root Special, 2012, commercial axles, big brakes, full width arched window, easy sheet, sprung drawbar, hyd tailgate, 3’9” sides, mud guards/ﬂaps, grain chute/sock, LGP tyres, LED lights, excellent condition. D Todd Tel: 07768 553833/01462 813390(T) (Beds). BAILEY 15t Root Special, 2011, 560 tyres, hydraulic door, sprung drawbar, full width front window, easy sheet, full factory respray ñ looks as new, new plastic mudguards. D Todd Tel: 07768 553833/01462 813390(T) (Beds).

TRI-AXLE BOX TRAILER 9yrs old, 4.9m x 1.93m x 2.5m, double back doors & single side door, tipping gear & loading ramps. £1,500. J Ridley Tel 07850 138851 (Beds) F664

£14,995

07748 004794/01245 442224 (T) 10,000L c/w chemical lockers, Super Single wheels, LED lights, hyd brakes £7,500+VAT 8,000L £6,500+VAT Other sizes to 16,000L built to order Chassis kits made for your tanks, pumps/pipework fitted as required

F45-66B

Buy and sell online – www.farmads.co.uk

POSITIVE DRIVE TRACKS

LOW loader trailer, new ﬂoor, recently shot blasted & painted, 18’x8’. Offers. N Lee Tel: 01944 738143 (N Yorks). NEW Bailey 19t low loader, 26’, bale wedge, air/hyd brakes, hyd ramps. POA. D Todd Tel: 07768 553833/01462 813390(T) (Beds).

16.9X38 dual wheels with clamps, tyres 30-40%. £165. C Banks Tel: 01777 870246/07971 627574 (Notts). 18.4X26 Goodyear Super Traction 12 ply, good sound condition. £100. P Buckenham Tel: 07770 797846/01268 416875 (Essex). ADAPTOR plates to ﬁt Russian radials/ Terra tyres to ﬁt Renault 500/600 Series, Claas or Massey Ferguson ie Gima axle, as new, bolts included. Offers. RL Maundrell Tel: 07785 568800/01527 854834 (Warks). BLACK Stocks duals with clamps, 16.9 30, 30% Goodyear, £250; black Stocks 16/28 duals, tyres poor, clamps included, £150; four 480/70/30 Fastrac wheels & tyres, 5 stud for 2170, 2135, etc, £700 for all 4; two 540/65/38 Goodyear approx 50%, £500. C Frick Tel: 07774 958613 (Lincs). DUAL wheels 18.4 R38 5% & 230%. £200. J Ridley Tel: 07850 138851 (Beds).

GOODYEAR crossply 20.8 R38 20%, £150+VAT/pr; Taurus 480/70 R28 front 95% £525+VAT/pr, currently on Stocks centres. D Hodge Tel: 07766 864884 (Suffolk).

LOW LOADER PLANT TRAILER 12t, 20', air brakes, suitable for agricultural or industrial use, c/w front & rear jack legs, adjustable high or low suspension with rear loading ramps, little used, unmarked, rust free condition. £2,750 ono+VAT. H Panton Tel 01651 806306 (Aberdeenshire) F656

DISCOUNTS FROM 25%

All makes sold Part exchange welcome

For specialist wheels and tyres and those difficult to solve tyre problems

Call Stuart on:

01328 862 332 077362 71058

www.fieldens.co.uk

FIRESTONE 20/8 x38 25% good tyres. R Booth Tel: 07712 042437 (Lincs). FIRESTONE 710-75-R34, 100% tread. £500. EW Sykes Tel: 07717 824989 (Cambs). FOUR 750x16 Land Rover tyres. £40. D Compton Tel: 07764 687201/01767 262055 (Beds). FOUR super single tyres, 385/6522.5, part worn. £60 each. C Dening Tel: 07813 004395 (Somerset). FULL set of Firestone Performer tyres, rears 520/85/38 50%, fronts 420/85/28 50%, completely sound tyres, replaced with bigger tyres. E Clark Tel: 07879 698807 (Norfolk).

MICHELIN radial rowcrops (2) 8.3x44 50% worn; Michelin radial rowcrops (2) 8.3x32, Michelin radial 50% worn. Cheap. R Rayner Tel: 07808 066655 (Cambs). NEW ﬂotation tyres & wheels for Kellands Agribuggy at half price, Trelleborg twin radials 159D 580/65R22.5. £2,250 ono. TJ Warhurst Tel: 01608 685100/07747 621380 (Warks). NEW pair of Michelin tractor tyres, 16.9R30. £950. LD Rich Tel: 07774 112211 (Glos). ONE 225-75-16 wheel/tyre, Japanese truck? £30. D Compton Tel: 07764 687201/01767 262055 (Beds).

01449 675071

130 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 130

20/11/2015 11:58

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

NICHOLSONS A T Houghton AGRICULTURAL ENGINEERS

Stalham Engineering Co. Ltd

Saddington Road, Nr Shearsby, Leics LE17 6PX

The Green, Stalham, Norwich NR12 9QG

www.stalhameng.co.uk JCB FASTRACS NEW JCB 4000 Series FASTRAC ORDER NOW for DECEMBER delivery 4220 model available for DEMO USED JCB FASTRACS Ex demo JCB 4220 full spec available Nov 2008 JCB 7200 Fastrac c/w front linkage, 710/70/42 & 600/70/30 tyres, excellent condition ..........................................................................£34,000 2010 JCB 7230 Fastrac c/w front linkage, 650/85/38 tyres as new .........................................£52,000 2010 JCB 2170 4ws – choice of 2 ................................................................................................ POA 2013 JCB 3200-65 Xtra 540/65R34 tyres, low hours – choice of 2 ............................................... POA

NEW JCB FORKLIFTS EX STOCK JCB 525-60 NEW MODEL, JCB 531-70 Ag Super, JCB 541-70 Ag Super, JCB 541-70 Super (Adblue)

CASE 885XL 2wd

SILO KING 12 cube compact

CLAAS 657 ATZ

JOHN DEERE 6620 2004, c/w heavy duty loader

USED FORKLIFTS 2008 Manitou MT732 telescopic, low hrs, JCB carriage ..........................................................£22,000

McCORMICK TRACTORS NEW ex stock McCORMICK X7-450, full spec ...................................... POA Ex demo 2013 McCORMICK X70-60, 50k transmission, 175hp, front & rear suspension, front weights, 600-65x38 & 480-65x28 tyres, 733hrs............................................................................................£59,000 Ex demo 2014 McCORMICK X7-660, Power Plus, 50k transmission, 165hp, front & rear suspension, air brakes, front weights, 600-65x38 & 480-65x28 tyres, 414hrs .................................................. POA Manufacturer’s ﬁnance available on all the above

NEW MACHINERY (IN STOCK)

BOMFORD Kestrel S hedgecutter KVERNELAND 5f LB variwidth plough (ex demonstrator) KVERNELAND 6f LO variwidth plough, on land/in furrow KVERNELAND NGH 401 4m power harrow c/w 585mm packer roller KVERNELAND TAM 4332LT, 3.2m, 8 disc, trailed mower/conditioner LELY Welger RP 445, E link, on 500/55-20 wheels, round baler LELY Splendimo 240MC, 2.4m, mounted mower/conditioner LELY Rotonde 510 CD, windrower LELY Hibiscus 4855, single rotor rake LELY Splendimo 205, chassis mounted mower REDROCK 14.5t grain trailer TEAGLE Tomahawk 8100SC, feeder bedder WALTER WATSON 6.3m hyd folding Cambridge rolls 24” dia c/w breaker rings & paddles WALTER WATSON flat rolls – one 8’x30”x10mm, two 10’x36”x14mm, two 12’x36”x14mm & two 10’x42”x18mm WARWICK bale trailers, 25’, selection

NEW SEASONAL MACHINERY NEW/EX STOCK – ALL AT SPECIAL PRICES BAILEY 16t TB trailer, hyd taildoor, rollover sheet, arched front window, air & hyd brakes, 560/60 22.5 tyres........................................................£18,000 COUSINS 3m V-Form 5 leg subsoiler with razor packer......................... POA POTTINGER Syncro 3m cultivator with crumbler................................... POA POTTINGER 3 & 4m power harrow, Aerosem seed drill combination with heavy discs, demo available .......................................................... POA Ex demo POTTINGER 4m Syncro hyd folding ring packer .............................................................. POA Ex demo POTTINGER 6m Syncro hyd folding ring packer .............................................................. POA Ex demo POTTINGER 6m Terrasem trailed grain drill, full spec ....................................................... POA

NEW SOIL SEPARATORS, PLANTERS & BEDFORMERS

CLAAS 557 ATZ, 2007, 4000hrs, good condition CLAAS Variant 180 rota cut, round baler in good condition WELGER RP220 Farmer Master Cut (2005) KVERNELAND 2008 TA 4232, 3.2m trailed mower KVERNELAND 4032 trailed mower conditioner KVERNELAND 6 furrow LB85-240 Vari width reversible plough KVERNELAND L120-85 4f rev plough No.8 boards (very tidy) KVERNELAND 12cu/m Silo King mixer feeder TEAGLE 80/80 Tomahawk (2010) TEAGLE 40/40 Tomahawk feeder bedder, vgc LELY Roterra 4m power harrow c/w packer roller CASE 885XL 2wd COUSINS Patriot 3m, c/w Terracast V2 seeder, excellent condition KVERNELAND 2 drum mower TWOSE 10’grass harrows PARMITER set of folding grass harrows, c/w frame IFOR WILLIAMS DP120G/12 demount cattle trailer, good condition ................................................... £2,600 IFOR WILLIAMS 12’ flat bed trailer with sides, good condition

NEW/EX DEMO GRAIN DRILLS Ex demo POTTINGER 6m Terrasem trailed grain drill ............................. POA Ex demo POTTINGER 4m Terrasem trailed grain drill ............................. POA New POTTINGER 3 & 4m Aerosem power harrow drill combination...... POA Used VADERSTAD RD300 3m trailed drill .......................................£15,000 Used KVERNELAND iDrill/power harrow combination ....................... £7,500 USED FARMFORCE Ultra Tilth 3m, 6 subsoiler legs, levelling discs and rear packer ................... £2,750

USED GRAIN DRILLS KVERNELAND iDrill power harrow combo, Suffolk coulters ....................................................... £7,500 VADERSTAD RD300 3m trailed drill .........................................................................................£15,000

USED TRAILERS

BAILEY

TRAILERS 2010 BAILEY 15t, air/hyd brakes, ABS, drop side, arched front window, rollover sheet, 560/60x22.5 tyres ............................................................................................£16,500 BAILEY 18t Beeteaper with NEW 650 tyres .................................................................................... POA

263hp c/w front disc brakes

Telephone: 01692 580513

EMAIL: agsales@stalhameng.co.uk

Deutz 7250 TTV 12C06B

MOBILES: TONY NICHOLSON 07770 811950 DAVID NICHOLSON 07885 269499

12C49B

SECONDHAND MACHINERY

OUT OF SEASON TERMS ON STANDEN

Buy and sell online – www.farmads.co.uk

USED JCB FORKLIFTS 2013 JCB 541-70 Agri Super f/w new 145hp engine, 500/70/24 tyres .................................... £39,500 2007 JCB 531-70 Agri Super...................................................................................................£23,500 2007 JCB 541-70 Agri Super...................................................................................................£24,000 2006 JCB 541-70 Agri Super...................................................................................................£24,000 2010 JCB 531-70 Agri Super...................................................................................................£29,500 ALL above machines sold with 90 day warranty 2015 ex demo JCB 541-70 Agri Super, 145hp engine 500/70/R24 tyres ....................................... POA

Our own demonstration tractors – phone and book an appointment

0116 247 8999

Adam Wilson 07739 635212 December 2015 www.farmads.co.uk 131

farmers_guide_class_december_15.indd 131

20/11/2015 10:31

MARK HELLIER

Tel: 01580 291271 Mob: 07836 723944 www.markhellier.co.uk sales@markhellier.co.uk

CASE: 2009 Magnum 280, 5895hrs, 50kph, a/brakes, f/link .........................................................................£38,000 2012 Puma CVX145, 5692hrs, 145hp, a/brakes, f/weights, a/seat, PUH, A/C, extra work lights fitted & electric mirrors ...................................................................................£36,000 2012 Puma 215, 3700hrs, f/& cab susp, elec mirrors, f/link, a/brakes, 50kph ....................................£40,000 2013 Puma 160 CVX, 2866hrs, 40kph, f/susp, f/link, A/C, elec mirrors, 3 pair spools.........................£42,000 2012 230 CVX, 223hrs, 50kph, a/brakes, f/link, PTO, extra work lights, mid mount valves, AFS 700 monitor, 4 speed PTO, Isobus, rear spool valves, elec mirrors, climate control, German hitch, heated glass, hyd top link & levelling ............................................................................................... POA 2011 Maxxum 120, 179hrs, 44kph, cab susp, p/seat, climate control, big lift cylinders, 3 elec spool valves, mid mount valves, American specification ........................................................................... POA 2011 Maxxum 140 .................................................................................................................................. POA

JOHN DEERE: 2012 2008 2010 2010

6630 Premium, 5337hrs, 40kph, TLS, tyres 18.4x38 & 16.9x24 ..................................................... POA 6130, 4661hrs, 40kph, roof hatch, f/weights, a/seat, PUH, A/C, semi p/shift .............................£18,500 7930, 4749hrs, Autoquad, 40kph, ECO, TLS, Greenstar ready ...................................................£46,000 6430 Premium, 5266hrs, 115hp, 40kph, front loader with Q55 Quicke loader, f/& cab susp, f/link, PUH, A/C, semi p/shift.....................................................................................................£32,000

NEW HOLLAND:

2008 T7050, 7402hrs, 200hp, f/susp, cab susp, a/seat, Intelliview 3, A/C ..........................................£25,000 2010 T7070, 7000hrs, 50kph, a/seat, f/link, Auto Command, f/link, Intelliview....................................£32,500 2011 T7.210, 1713hrs, 50kph, no front brake, a/brakes, f/link, PTO, Power Command, Intelliview, guidance ready, pass/seat, German hitch, 1000 PTO, mid mount valve ............................................ POA 2012 T7.210, 4950hrs, Auto Command, f/link & PTO, Sidewinder, Intelliview......................................£33,500

FENDT:

2008 930 Profi Line, 65kph, 6874hrs, cab susp, f/link, electric mirrors ..............................................£45,000 2009 T151 Hi Tech, 6300hrs, 50kph, a/brakes, Quicke 66 loader, 4 spool valves, rear wheel weight, metallic red ..................................................................................................£30,000 2013 A83 with Trima loader, 1327hrs, 40kph, 103hp, Hi Tech engine, synchro, electric shuttle ...........£26,500 2009 N82, 3279hrs, A/C, 400/80x24 75% & 480/80x34 75% ............................................................£18,500

MASSEY FERGUSON:

2011 8680, 3450hrs, 50kph, a/brakes, f/link, TopCon guidance, 2 f/spools, Isobus socket, rear wheel weights, in warranty until March 2016.............................................................................£53,000 2008 6480, c/w Quickie Q66 loader, 4865hrs, 50kph, 152hp .............................................................£28,500

DEUTZ-FAHR:

2013 TVT 7210, 2634hrs, f/link, 50kph, 242hp, a/brakes, Isobus, 7 spool valves ...............................£46,000 2010 640, 5400hrs, a/brakes, f/link, PTO...........................................................................................£28,500 2007 TTV1160, 5760hrs, 50kph, F/& cab susp, f/link, PTO, load sensing, hydraulics, c/w 5 spool valves.......................................................................................................................... POA 2009 M600, 5855hrs, 50kph, a/brakes, Stoll loader, f/& cab susp, very tidy ............................................. POA

JCB:

2012 3CX Eco Contractor, 4003hrs, Powerslide, easy controls, boom hydraulic quick hitch ................£33,500 2008 JS130 LC CW, excavator, 4700hrs, 50% undercarriage, HQR, check value, piped, 1 owner, all original paint ........................................................................................................................£25,500 12C15B

Buy and sell online – www.farmads.co.uk

VALTRA:

J. T. FRISKNEY LTD 17-29 West Street, Horncastle, Lincs LN9 5JE

Tel: 01507 523233 Mob: 07715 324301

www.friskneys.co.uk Regional Importers of VOGEL & NOOT

Also at Boston Aerodrome, Boston PE21 7NY

Tel: 01205 361281

MANITOU Dealers for Mid Lincs

Deutz 5690 combine YX08 c/w 6.3m header & trolley 1600hrs.............................. £65,000 NEW Deutz 6 Series tractors ................................................. 0% Finance Available New Lely Welger 415 baler ................................................... 0% Finance Available £19,250 NEW Manitous available from stock ....................................................................... POA New Albutt C376HG fork & grab ............................................................................ £2,675 New Vogel & Noot 5 furrow ploughs in stock & available now .........................from £10,450 Ex demo VHS Cropmaster 6m veg rig.................................................................... £10,000 Manitou MLT 634 120 T 2006 good order .............................................................. £19,500 Manitou MLT 725 Turbo (1995) average condition ................................................. £9,500 Deutz 180.7 2006 6600hrs .................................................................................... £25,000 Lamborghini Champion 135 2000 ......................................................................... £10,750 Welger RP535 2008 24000 bales .......................................................................... £10,750 Vicon RV 1601 2006, 30000 bales ........................................................................ POA Vicon RV 1601 2001 ............................................................................................. POA Claas Variant 360 2011 14000 bales..................................................................... POA Haybob Weaving very tidy machine ....................................................................... £1,250 Bomford 508 hedge cutter c/w trim-master belt drive head good order .................. £3,750 Votex 12’ pasture topper with end tow good order ................................................. £925 Suton 7’6” hydraulic drive good condition............................................................. £1,250 Parmiter Shear grab ............................................................................................. £500 Moore 4m folding Cultipress 2005 ....................................................................... £2,750 Greenland 4m power harrow with packer in good order ......................................... £2,500 Vogel & Noot 4m Disc drill with following harrow very good order ......................... £7,950 Amazone RPAD402 4m disc drill........................................................................... £3,750 Kuhn Comet ZSA spreader ideal for small farm/equestrian ..................................... £400 Used Hondas please phone for details.................................................................... POA Trackers available ..........................................................................from as little as £85

12C04A

BAGMA Approved trailer brake inspection & testing done on site We can also ﬁt immobilisers and tracking devices Agents for DATATAG - phone Roy for details All prices ex depot plus VAT

MANITOU:

2002 63-120 LSU, 6400hrs, tyres 30% .............................................................................................£13,500

Norris Plant Hire & Sales Ltd

Used Sprayer & Beet Harvester stock

2014 JCB 3CX TL hammer pipes, M/Q/H, 300hrs ....................................................... £41,500 2009 JCB 531/70 Agri Super, 5000hrs .......... £27,000 2002 3t Benford swivel tip dumper .................. £3,950 2010 JCB JS 145 .......................................... £30,000 2010 JCB JS130 ........................................... £28,000

2012 AGRIFAC CONDOR II, 4100 ENGINE HOURS, 36/24 METRE, 5000 LITRE, TWIN LINE, GPS WITH AUTO SECTION CONTROL, 380/90 R46, ALTEK SPRAY PUMP, V.HIGH SPEC.

2010 VERVAET 625, 5000 ENGINE HOURS, LEAF SPREADER TOPPER, 45CM/50CM SHEAR LIFTER, LEAF SPREADER TOPPER WITH INTEGRAL FLAP, 25T TANK.

2009 ROGATOR 618S, 5000 LITRE, 32 METRE, AUTO SHUT OFF, BOOM LEVELLING, 6000 ENGINE HOURS,380 R46 ROW CROPS, 750/60 R26.5 MICHELIN MEGA X BIB. PRICE: £40,000.00 + VAT - CHOICE OF TWO, 2009 & 2006

2012 HOLMER T3, 3100 HECTARES, 3100 ENG HOURS, COMBI TOPPER, LIFTER 45CM-50CM, FRONT TYRES: 800/60 R32 MICHELIN, REAR TYRES: 1050/50 R32 MICHELIN, 32KM ROAD SPEED. VERY GOOD CONDITION

2012 JOHN DEERE 5430I, 32/18 METRE, 4000 LITRE TANK, 400 LITRE CLEAN WATER TANK, AIR SHUT OFF, AUTOMATIC BOOM HEIGHT CONTROL, FAST FILL PUMP, SF2 3000 GPS RECEIVER, VERY GOOD CONDITION.

2003 HOLMER T2, 45CM ROW WIDTH, INTEGRAL TOPPER, 6500 ENGINE HOURS, PARTS INCLUDED WITH MACHINE.

2011 JCB 801.4, canopy ................................ £8,250 2014 Cat 308................................................ £49,500 2014 JCB 86-C 300hrs, steel tracks .............. £45,000 2014 JCB 8065............................................. £34,750 2013 Cat 301.7, choice of 2.......................... £13,500 2010 JCB Micro digger, choice of 2 ................. £7,500 To view any of the above machines visit our website

ALL MACHINES ARE

FOR HIRE OR SALE • Telescopic Handlers • Backhoe Loaders • Crawler Excavators • Plant Hire • New & Used Plant Sales • Wheel Loaders • Site Dumpers • Mini Diggers 12C50B

FINANCE AVAILABLE

We are always looking to purchase JCB machinery If you have anything that may be of interest to us, please...

Call us for a quote!

Contact Steve Norris

t: 01949 842 604 e: nph@norrisplant.co.uk www.norrisplant.co.uk

Acrelands, Orston Lane, Bottesford, Notts NG13 0AU

For More Information Please Call: 01354 660552 E: info-uk@agrifac.com

Agrifac UK Ltd, 4 Thorby Avenue, March, Cambridgeshire, PE15 0AZ

132 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 132

20/11/2015 10:32

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

SPECIALISTS

•ROWCROP WHEEL ASSEMBLIES

•STOCK DUAL WHEELS

NEW/USED •WHEELS AND CENTRE DISKS •WHEEL MODIFICATIONS •SECOND HAND & PART USED •PART EXCHANGE CONSIDERED

Colin

Sims

0 805000881 1 3 8 07 205 46 .com

ct Conta

1 Fax 0raltyresandwheeeelsls.com

ltu dwh agricu resan sales@ riculturalty g .a w w w BOSTON

PAIR of Michelin 1050/50/R32 tyres, sidewall damage to one of the tyres that will need to be repaired before the tyre can be used. Please contact for more details. POA. J Hodges Tel: 07973 897247 (Bucks). PART worn tyres, 520/85x42, 20.8x42, 600/65x28, 420/90x30. POA. JD Birch Tel: 01530 222747/07831 113316 (Leics). PIRELLI radial tyre 12.6x38 60% tread, suit scraper tractor. £25. RE Matthews Tel: 01889 502537 (Staffs). QUAD bike wheels & Goodyear tyres - 1 pair 24x8-11; 1 pair 24x9-11, 50% tread, fits Honda 400. £60+VAT per pair. GR Walton Tel: 07860 826033/01359 230049 (Suffolk). ROWCROP wheels & Continental tyres, off JD6420, 50% good, fronts 12.4-32, rear 340-85-48. Offers. N Lee Tel: 01944 738143 (N Yorks). SELECTION of used tractor tyres, 16.9 R38 Kleber (35%), 14.8 R28 Kleber (35%), pair of 600/70R30 Kleber Super 15 (25%), Michelin MachXbib 650/85R38 (30%). GW Harrold & Partners Tel: 07836 751076 (Norfolk). SELECTION of used tractor tyres, Michelin XeoBib VF600/60R30 (25%), pair of Michelin XeoBib VF710/60R42 (25%), Michelin 650/65R38 x M108 (25%), Goodyear 480x70x30 Fastrac tyre (20%). GW Harrold & Partners Tel: 07836 751076 (Norfolk). SET of hardly used high speed narrow wheels 340/85R36 & 380/90R50, did come of a JD 7530 and a JD 6820, the fronts have interchangeable centres & all have 90%+ tread, sale due to change in farming policy. £3,750+VAT ovno. C Easter Tel: 07970 987242 (Essex). SET of hardly used high speed narrow wheels 380/85R36 & 380/90R50, came off a John Deere, fronts have interchangeable centres & all have 90%+tread, sale due to change in farming policy. £3,750+VAT ovno. C Easter Tel: 07970 987242 (Essex). SET of rowcrop wheels, rear Michelin 230/95R48xM25, front Alliance rowcrop radial 9.5R32 (230/95R32), available with pans to fit Massey or pans to fit Ford 7810 etc. GW Harrold & Partners Tel: 07836 751076 (Norfolk).

VEGETABLE EQUIPMENT EDMOUNDS leek trimmer, tractor mounted, PTO driven, to cut tops & roots off in the ﬁeld, ideal for small grower. £500 ono. R Emery Tel: 07973 532989 (Beds). EDMOUNDS vegetable washer, sprays water top & bottom then catches it in a trough, reasonable condition, chain link belt, good order, 3 phase electric motor. £500 ono. R Emery Tel: 07973 532989 (Beds). SINGLE bed onion set/bulb planter, gwo. POA. T Noble Tel: 07816 477293 (Cambs).

VEHICLES 1995 Isuzu Trooper 3.1TD SWB commercial in blue, strong & straight, but not used for some time, hence only £795. R Pusey Tel: 07711 712527 (Bucks). CHERISHED personal number plate, A403 KAY, on retention 10yrs, assignment fee £80 paid, ready to go straight on to a vehicle. £1,000. EM Calcott Tel: 01827 62265 (Staffs).

big wheel motocross bike, unused shop soiled condition, great value for Christmas at

£2,900

01493 750999 Norwich, Norfolk (T)

DAF LF 45-150, reg HY53AHZ, 20’ ﬂat deck, used for straw haulage, 263840kms, MOT till March 16. £3,250 ono. AP Scales Tel: 07811 317567/01279 730168 eves (Essex). DISCOVERY TD5 7 seat Landmark, 2004, dark blue, 95k miles, new MOT, full leather, towbar, engine re-mapped for towing, good condition, service history. I Davis Tel: 01707 261304 / 07738 614082 (Herts). FOLD-AWAY tail lift, ex 7.5t HGV Dhollandia, 1000kg capacity, c/w manual. £775. P Buckenham Tel: 07770 797846/01268 416875 (Essex). FORD Ranger 4x4 double cab pick up, 35k from new, one year’s MOT, ready to go. £3,500. J Hicks Tel: 07539 367336 (Berks).

VW Caddys (63/14/64/15 plate)

FREE

DELIVERY NATIONWIDHEOURS 48 IN H IT W from £7,995+VAT

late low mileage examples always available

Please call David anytime on

07980 741124 Viewings by appointment

roofbars/towbars available All vehicles HPI clear

All major cards taken • We are situated 5 mins from Junction 9 of the A1 in Hertfordshire

www.fleetwoodvans.co.uk FORD Ranger Wildtrak, 2010, 78,000mls, MOT till Nov 2016, full service history, Copper red, gc. £10,500+VAT. B Hull Tel: 07969 974614 (Essex). FORD Ranger Wildtrak, 60 reg, 78,000 miles, MOT till November 2016. £9,000+VAT. B Hull Tel: 07969 974614 (Essex). FORD Ranger, 05 plate, 12mth MOT, 75,000 miles, 2 new tyres, towbar, no farm work, top of the range model, double cab, tonneau cover. £3,850 no VAT. R Davy Tel: 07762 164552 (Northants). LAND Rover 110 TD5, 2002, black limited edition, leather, A/C, high mileage, one owner from new, Ifor Williams top. £9,750. JD Birch Tel: 01530 222747/07831 113316 (Leics). LAND Rover Defender 90 TD5, 53 plate, County pack & extras including electrics, metallic dark blue, ring for details. £7,995. TJ Barnes Tel: 01353 665912 (Cambs). LAND Rover Discovery 4GS (59), 105,000mls, white, serviced, vgc, tow bar, sunroof. £16,500. R Garner Tel: 07836 615844 (Norfolk). MITSUBISHI L200, 54 reg, single cab, MOTed & one estate farm from new, but engine needs attention, hence only £1,250 ono. R Pusey Tel: 07711 712527 (Bucks).

MITSUBISHI Pajero 2800 diesel, 3dr, M reg, MOT. £650. AP Shreeve Tel: 07501 468141 (Norfolk). MITSUBISHI Shogun Sport Equipe, 3L V6 petrol, manual, 2001 (51), metallic silver, 5 door, leather seats, towbar, electric windows & sunroof, 2 new tyres,12mths MOT, 108,000 miles, very good condition for year, inside & out. £1,250 ono. RD Walker Tel: 07885 498802 (Oxon).

COUNTRY VEHICLES Land Rover Defender 110, 94M, 300TDi, yellow .........£4,995 Land Rover Defender 90, 91H, 200 TDi ....................£4,495 Land Rover Defender 110, 86D, 200TDi .....................£2,995 Dave Smith: mobile 07973 139483 home/fax 0115 965 2204

F48-05B

•FLOATATION

2015 Yamaha YZ85

F48-33B

APPLICATIONS

F46-01C

•SPECIALISED WHEEL

CITROEN C15 van, 2001 (Y reg), 55,000 miles, 10 months MOT. £450. H Stewart Tel: 07831 468975 (Warks).

NISSAN Terrano II LX TD, L reg, Oct 1993, 2.7L diesel, 3 door, dark grey, 4wd, tow ball ﬁtted, 132,000mls, MOT to July 2016. £495+VAT ono. BM Margetts Tel: 01954 250908/07766 748621 (Cambs).

LAND ROVER DEFENDER 110 2.4L TDi XS 5DR, 2009, 53,000 miles, silver, A/C, part leather seats, electric windows, tow bar, sound proofed, excellent condition, 1 previous owner. R Wright Tel 07768 954466 (Lincs) F701 RANGE Rover SE auto, V8 petrol, automatic, 1996, red, MOT April 2016, good condition, 100k miles. J Hitchcock Tel: 07850 292600 (Suffolk). TRUCKMAN top to ﬁt Toyota double cab, come off a 1992 model, white, £40+VAT ono. RL Maundrell Tel: 07785 568800/01527 854834 (Warks). VW Transporter van, T5, A/C, sat nav, bulk head, side door, MOT. £4,500 ono. RW Hopkinson Tel: 07976 424263 (Lincs).

VINTAGE & CLASSIC ALLIS Chalmers Model B, spares or repair, good tinwork, no top end engine. AT Harrison Tel: 01564 742411 (Worcs). DAVID Brown 1200 c/w cab, good starter, good puller, loads of gears. £1,800. P Nickalls Tel: 07850 588616/01953 602208 (Norfolk). EIGHT new beater bars for Allis combine, 99cm long, £100; new drum for MH726, £150; block, head & Beccles Engineering manifold for MH726, £150; old 4 wheel trailer with ladders made by North Stoke Wagon Works, gwo, £150. J Chapman Tel: 01379 676324 (Norfolk). FERGUSON cultivator with all new points, £275; also 3t tipping trailer (not Fergy), £325. DG Drew Tel: 01328 701170/700288 (Norfolk). FORDSON Major EIA engine. £850. W Smith Tel: 01724 763705 (Lincs).

PLEASE

MENTIO

DE ERS GUI

FARM LYING HEN REP

W NTS RTISEME TO ADVE

FOUR rear wheel weights to fit Fordson Major or early County, also 2 front wheel weights to fit Massey Ferguson 2wd. N Johnson Tel: 07751 588636/01728 628235 (Suffolk). GENUINE Allis-Chalmers 1135618 small V belt, obsolete size, probably for a c.5000 combine, 3 off. £10+postage. C Flatters Tel: 01775 640112 (Lincs). GREY Ferguson T20 diesel, 1953, gwo. N French Tel: 01692 598220 after 6pm (Norfolk). IH TD6 petrol/diesel crawler, runner tracks need attention, complete as last used, stored in shed for last 5yrs age, 1946 machine; IH TD6 breaking for spares; BTD 6 breaking for spares, good tracks. PJ Dudley Tel: 01763 838130 (Essex). IRDCP front & rear lansides, £15 & £25 respectively; 3 used 183 mouldboards, 1 good, 2 very good, £40 & £60 each; 4 good light harrows with whippletree, £95; 4 old heavy harrows with whippletree, £60. J Chapman Tel: 01379 676324 (Norfolk). MASSEY Ferguson 135, KFU408E, very good condition, 4 new tyres, new battery with 2 furrow plough & 9 tine cultivator. £4,250. W Smith Tel: 01724 763705 (Lincs). MF banana trip loader, grey, early 1950s, still has original paint, c/w all fixing brackets. £600. W Shepherd Tel: 07860 423139 (Herts). MF135 tractor, 1972, straight axle, average condition. £4,000 No VAT. G Dunn Tel: 01945 870570/07768 904984 (Cambs). MF165, 2200 genuine hrs, first registered to British Sugar Holmeward Hall on 25/3/69, Perkins A4.212 engine, drives like new in good original condition, first class tyres, excellent starter, straight sound tinwork, very genuine tractor. £5,300 ono. ER Griffin Tel: 07939 151164 (Lincs). MF35 tractor, 3 cyl, 1961, V5, genuine 7800hrs, good tyres, all original, excellent condition, all old tax discs back to 1988. £3,500. W Shepherd Tel: 07860 423139 (Herts). NARROW wheels & centres to fit Ford Major or Ford 4000. £150. TJ Barnes Tel: 01353 665912 (Cambs). NEW Holland model 445E grass mower. £150. A Strawson Tel: 07881 684687 (not Sundays) (Suffolk). NUFFIELD universal parts, nose cone & bonnet, shotblasted, in primer, set of reconditioned injectors, radiator, manifold, stub axles. RM Futter Tel: 07740 106944 (Norfolk). OLD Priestman track digger with Lister engine. GA Meadows Tel: 01728 660577/07951 848638 (Suffolk). PETER Standen single row side elevator, in need of restoration. R Baker Tel: 01953 850238/07801 557640 (Norfolk). QUANTITY of Massey Ferguson linkage hooks, drawbars, lifting linkage for hooks & linkage arm stabilisers to fit MF65, MF165 & MF590, £150; also wheel centres for MF 65 & rim for MF590/290, £30+VAT. D Freeman Tel: 07506 429614 (Essex). RANSOMES dumper MG40 based, wide track on rubber pads, ideal restoration project. £2,200. N Finbow Tel: 01728 602115 (Suffolk). SMYTH drill, gc, barn stored. £100. B Hull Tel: 07969 974614 (Essex). THREE rear wheel rims to fit Ferguson T20. £70+VAT ono. N French Tel: 01692 598220 after 6pm (Norfolk). VINTAGE MF Sunshine drill, seed & fertiliser, 12 row, on iron wheels. £100+VAT ono. BM Margetts Tel: 01954 250908/07766 748621 (Cambs). WOODEN dray with drawbar, 12’, also barrel butter churn. Offers. A Bell Tel: 01205 460268/07720 495007 (Lincs).

Buy and sell online – www.farmads.co.uk

AGRICULTURAL TYRES & WHEELS

PAIR 16.9x34 dual wheels 60%, Goodyear tyres. £500. A Ford Tel: 01508 530598/07708 154580 (Norfolk). PAIR of 15” wide R38 rims 8 stud off a Deutz Fahr, £400; pair of Trelleborg 700/75-26.5 6ply, 8 stud, 30% tread, £400; pair of 16.9R34 Michelin Stocks 30% tread, £400. H Hutsby Tel: 07917 130213 (Warks).

SINGLE Goodyear front tyre 14.9R28 50% tread, £140; single Goodyear front tyre 14.9R28 20% tread, £90; single Taurus front tyre 14.9R28 50% tread, £140. C Cornish Tel: 07880 976137 (Suffolk). SINGLE India Farm tractor front tyre, 12.4/11-28, 30% tread. £80. C Cornish Tel: 07880 976137 (Suffolk). STOCKS box rim rowcrops 340/85R46 Continental 60%, 270/95R36 Alliance 60%, to fit 6930 John Deere, good condition. A Bentley Tel: 07957 553028 (Norfolk). STOCKS dual wheels, 650/65R42 Michelins, 15% tread, vgc, 12” bands. £995+VAT the pair; 20.8R38 Klebers 25% tread, 12” bands, £395+VAT the pair, eye nuts & clamps can be included; pair of 18.4R38 tyres, 25%, ideal for duals, £95+VAT. RL Maundrell Tel: 07785 568800/01527 854834 (Warks). STOCKS dual wheels, fronts 480/70 R30 95% tread, rears 620/70R42 95% tread, GoodYears tyres all round, like new with no marks or cuts, with Stocks clamps. £4,750+VAT. H Hutsby Tel: 07917 130213 (Warks). STOCKS duals 650/85/38, brand new tyres, 6 clamps per wheel, excellent condition. £3,000+VAT ono. E Clark Tel: 07879 698807 (Norfolk). THREE 900x15.3, 6 stud trailer rims. £30 each. D Compton Tel: 07764 687201/01767 262055 (Beds). TITAN Italia F26C0450030 (w12x28) front steel rims, like new from Ford/ New Holland 8160/8260. C Cornish Tel: 07880 976137 (Suffolk). TRACTOR tyre 600/65R38 40%, gc. £250. R Emery Tel: 07973 532989 (Beds). TWO 12x38 rims & centres X county tractor. £100+VAT. D Compton Tel: 07764 687201/01767 262055 (Beds). TWO 600x36 rowcrop wheels & good tyres. £120. D Compton Tel: 07764 687201/01767 262055 (Beds). TWO flotation tyres 66x43x25, Case/ McCormick centres, £600; also 2 flotation tyres 600/55-26-25, Case/ McCormick centres, £1,000. GA Meadows Tel: 01728 660577/07951 848638 (Suffolk). TWO new, never used, 225/55-R17 Michelin Latitude 101H. £100. N Spray Tel: 07890 567794 (Derbys). TYRES (2) 18.4-15x30 tyres, two 14.9-13x26 tyres & rims, two 14.913x28 tyres & rims; also two Fordson cast iron front wheels. R Offord Tel: 01359 240251/01449 781557 (Suffolk).

F48-25B

TYRES & WHEELS (cont)

December 2015 www.farmads.co.uk 133

farmers_guide_class_december_15.indd 133

20/11/2015 12:04

12C13B

For all enquiries please call Wes Crawford Mobile: 07970 248110 Office: 01245 322733

Essex Depot – CM3 5XJ Kent Depot – TN27 0AN

Buy and sell online – www.farmads.co.uk

Challenger MT845C

Challenger MT865C

£110,000

£149,500

2011, 2500hrs, guidance ready, 30” Extreme Ag tracks, c/control, 16 idler weights ext warranty available

2012, approx 2000hrs, guidance ready, linkage, 30” Ext Ag tracks @50% ext warranty available

MF 7620 Dyna VT

MF 7618 Dyna 6

Challenger MT765C

MF 7624 Dyna VT

£125,500

£59,500

2012, approx 1850hrs, guidance ready, 2012,2600hrs, full susp, air brakes, 30” Extreme Ag tracks, Comfort pack guidance ready, f/linkage, f/PTO ext warranty available ext warranty available

MF 7616 Dyna VT

MF 3080

MF 8670 Dyna VT

MF 8480 Dyna VT

£59,500

£44,500

2011, 2900hrs, c/control, f/cab susp, guidance ready, f/linkage, air brakes, ISOBUS ready, Datatronic

2008, 4514hrs, c/control, full susp, air seat, f: 600/70R28 @ 75%, r: 710/70R42 Firestone tyres

MF 2190

MF 25 farm handler

£53,500

£57,500

£58,500

£9,000

£49,750

£8,500

2012, 2273hrs, f/linkage, a/brakes, 3sp PTO, 2 elec spools, 1 manual spool ext warranty available

2014, 2850hrs, full susp, f/linkage, f/PTO, loader ready, air brakes ext warranty available

2013, 1117hrs, f/linkage, f/PTO, Optiride Plus, Datatronic & ISOBUS ext warranty available

1989, 4600hrs

2010, 45500 bales, tandem axle 500/45/22.5 tyres

1998, 5608hrs, pick-up hitch, power shuttle

Claas Scorpion 6080

Fendt 724 Proﬁ Plus

Spearhead AgriCut 270

Kuhn MDS1142

Twose UWF/12/CB4

New Holland 5060

£17,500

£75,000

POA

£2,950

POA

£8,750

telehandler 2008, 6500hrs,Vari power, PUH, trailer braking, air seat, air con, Scorpion headstock

2011, 4000hrs, full suspension, guidance ready, 1800kg weight block

topper, 2015

2004, road lighting, hopper cover, mud ﬂaps, headland limiter system

12.4m rolls

conventional baler, 2013, 24,000hrs, road lighting, tyres @ 50%

Buy and sell online Too Late for Classification*

www.farmads.co.uk FREE ads for farmers 134 www.farmads.co.uk December 2015

farmers_guide_class_december_15.indd 134

20/11/2015 13:45

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 138

WANTED

JOHN BURKE

00353 8725 79073 jburkeagri@gmail.com

SCRAP WANTED ❚ Combines ❚ Sugar Beet Harvesters ❚ Tractors ❚ Trailers ❚ Cars ❚ Vans ❚ Lorries ❚ Trucks Top Cash Paid+VAT

David Smith 01353 861694 07968 661115

F50-61B

BAILEY 20t Beeteaper. David Brown & Sons Tel: 07710 316205 (Cambs). BIG bogie hay trailers, south Bucks area pref, steel sprung, ex-road artic. R Pusey Tel: 07711 712527 (Bucks). BORER for post hole borer, 9” or 12”. BL Colson Tel: 01284 828251 (Suffolk). CARRIER 4m drill, mounted disc harrows 8’/10’ wide. JE Doe Tel: 07860 314240 (Suffolk). CATERPILLAR D4C 24A, also DC6B bonnet, D6B drawbar, D6C bonnet & D4D44H bonnet. I Clark Tel: 07718 918400 (Beds). CATERPILLAR D6C direct drive, c/w bulldozer blade. RH Burt Tel: 01327 830242 (Northants). CATTLE feed barriers, 15’, sheeted gates, round or rectangular cattle feeders. S Wall Tel: 07858 798121 (Essex). CHAFF spreader for New Holland TX34. J Boor Tel: 07713 507710/01733 210790 (Cambs). GOODYEAR Terra tyre, 48x25x20, part worn. F Johnson Tel: 07840 215098 (Cambs).

WANTED

Used Tractors and Good Clean Farm Equipment

ATKIN FARM MACHINERY

NORWICH ROAD DEREHAM

Tel: Dereham (01362) 692104/637332

www.atkin-farm-machinery.co.uk

JCB 412/414/416S or similar agrispec loading shovel, late 90s, early 2000s preferred, but anything considered. B Thomson Tel: 07767 477371 (Aberdeenshire). LELY Polymat coulter arms. C Cornish Tel: 07880 976137 (Suffolk). LELY Roterra 44 Series. 3, 3.5, or 4m, any condition/non-runner OK, but tine holder on gearbox output shaft must not move on that shaft. N Threadgold Tel: 07412 045224 (Essex). LISTER fan engine or similar. T Noble Tel: 07816 477293 (Cambs). MAIZE cell wheels for Matco drill, red/green. R Baker Tel: 01953 850238/07801 557640 (Norfolk). MCCONNEL Shakaerator legs, 2 needed with top clamps & bolts. JM Gemmill Tel: 07766 877481 (Essex). MINI digger. Will pay cash & collect. C Walker Tel: 07513 915665/07836 666233 (Essex).

NEEDED ON A NATIONAL BASIS Contact us at http://register.ground-control.co.uk

www.ground-control.co.uk

Kingfisher House, Radford Way, Billericay, Essex CM12 0EQ

NEW Holland forager, 719 or 525, dead or alive, with good blades, shear bar & preferably a working metal detector, if not too much to ask. Willing to travel. B Perry Tel: 07814 936102 (Glos).

S Gray Recycling

SCRAP METAL All types of scrap combines, sugar beet harvesters, tractors & machinery Covering East Anglia

Tel: 077859 37779 or 01953 454462

PAIR of tyres, 540-65-28 front tractor tyres, 30%+ or similar. M Hornbuckle Tel: 07801 101645 (Leics). PLASTIC poultry crates, in good condition. J Rice Tel: 01449 711294/07759 650475 (Suffolk). RAPPA-3 Line ATV, also Rappa-3 Line trailer, must be in good working order. GR Goucher Tel: 01842 752100 (Norfolk). RECO/SULKY drill pre-emergence markers to fit Compact Master, any condition. N Green Tel: 07745 804320 (Cambs). SAMSON SP9 manure spreader for farmers own use. MR Gronning Tel: 01926 843460 (W Mids). SET of wheel eradicates for Vaderstad Rapid drill. J Hodges Tel: 07973 897247 (Bucks). SIX-INCH grain auger to fill 100t bin, engine/frame unimportant, only really need tube & flights, anything considered. S Hill Tel: 01603 759536/07881 786690 (Norfolk). SKH muck spreader 405 or 406, must be in good condition with little wear. G Shepherd Tel: 01283 732275/07940 597410 (Derbys).

12C01B

SPARES for Unispreader SKH840 drum & ﬂails. SG Bostock Tel: 01782 499768 (Staffs). TELEHANDLER, cheap 4wd preferred, would be especially interested in Bucks neighbourhood & not worried by rust or mud! R Pusey Tel: 07711 712527 (Bucks). TELEHANDLER, preferably small pivot steer, must be tidy. HE Taylor Tel: 07763 125574 (Bucks). TIM 2 row beet harvester, in reasonable condition. IP Howard Tel: 07876 315372 (Norfolk). TOTE bin, 1-1.5t. N Evans Tel: 07966 533015 (Shrops). TRIMBLE EZ-Guide 500 & antenna, must be in full working condition. C Richards Tel: 07771 876795 (Derbys). TYRES 18.5-19.5R or metric equivalent, wide super singles, needed for single axle muck trailers so tread not important, on 10 stud commercial rims would be great or just tyres. Willing to travel or arrange carrier. B Perry Tel: 07814 936102 (Glos).

WANTED

Land Rovers Defenders Range Rovers Discoverys Freelanders

all ages or condition cash paid and collected

01277 822001 rgb4x4.co.uk

Buy and sell online

WANTED

www.farmads.co.uk

All makes of good, clean, low houred tractors, telescopic handlers, Toyota Hilux pickups & construction equipment

Tel: 01647 24007 Fax: 01647 24107 Mobile: 07836 757411

Caring for our Environment

chris@southwesttractors.co.uk MOBILE grain dryer, electric drive, diesel burner, 15t plus capacity, must be easy to move. M Scarborough Tel: 07836 257363 (Leics). ONION harvester with rotating bar & paddle. David Brown & Sons Tel: 07710 316205 (Cambs).

01787 238200

www.cropco.co.uk WORKSHOP EQUIPMENT AJAX power hacksaw, 3 phase, working order. £150 ono. M Turner Tel: 07774 765648 (Warks).

Sexy Blondes... ...we don’t sell

QUALITY ENGINEERING MACHINES ...we do!

Large stock of machines and tooling to suit all budgets All machines can be seen under power and delivered if requested

Call Tim Dixon 07970 256342

www.timdixon.com F51-08B

ARCGEN 3 cyl Kubota diesel welder, 110volt gen, c/w all cables, on wheels, can be carried by forklift or put in van/pickup, smokes when starting, small fuel leak but will run all day. £600 ovno no VAT. B Clay Tel: 01902 842262/07833 374480 (Staffs). LARGE anvil, measures from back to tip of beak 27”, width of ﬂat top 5”, height 12.5”. can load. £60. JR Swan Tel: 07747 111070 (Essex).

Buy and sell online – www.farmads.co.uk

ADLIB barley beef hoppers needed. RT Jones Tel: 01954 250818 (Cambs). ALLMET 10t drier, modern (MC 207) also ﬂow, return & standard conveyors, must be in good condition. S Croft Tel: 07890 722347 (E Yorks). ANY toy tractors, diecast, tin or plastic. E Hewes Tel: 01858 880036 (Leics). ANYONE got a Claas Europa combine breaking for spares? I am looking for spares to keep mine going. C Flatters Tel: 01775 640112 (Lincs).

agricycle Farm Waste SNOW CLEARANCE Recycling We need you to clear snow as part of our winter maintenance programme. Ideally we would like you to work locally to your base and clear snow from our clients’ sites. Competitive rates offered dependent on machinery type.

F50-22A

Any model – 12m, 20m, 21m 24m Any age but must be clean & tidy

CROPCO

DO YOU HAVE A TRACTOR/TELEPORTER?

F50-20A

TRAILED SPRAYERS ONLY

F50-49B

SPRAYERS WANTED

F50-06B

4-METRE power harrow in good condition. Up to £3,500. S Hill Tel: 01603 759536/07881 786690 (Norfolk).

CONVENTIONAL bale wrapper, any make, static or trailed. Phone with details. A Youngman Tel: 07732 042213 (Suffolk). DIESEL grain drying fan. J Sly Tel: 07971 951505 (Cambs). DITCHING bucket. C Walker Tel: 07836 666233 (Essex). DUAL tyres, front & rear, rear tyres need to be 520/85R46 & front tyres 540/70/R28. J Hodges Tel: 07973 897247 (Bucks). ENGINE for David Brown 990. P Dickens Tel: 01604 830282 (Northants). FUEL pump for Ford 5000, Ransomes TS 82 plough, plus mini van or pick up, any condition. C Parker Tel: 07860 802389 (Essex). GOOD quality 2nd hand Law-Denis D200 cleaner, ideally c/w cereal/OSR screens. C Goldingham Tel: 01452 741112 (Glos). GRIMME CS150 or CS1500 destoner. G Blandford Tel: 07973 424473 (Hereford).

F50-05B

VALMET tractors in need of repair or being scrapped, required for salvage or repair. Blue Bridge Engineering, Essex 01245 422498 (T)

WASTE SERVICES & RECYCLING

TOO LATE FOR CLASSIFICATION* Farmads received after deadline and placed under this heading will no longer automatically appear in next month’s issue. If you wish your ad to appear again, please resubmit.

ACCORD DF1 front hopper, hydraulic fan, inc distribution head & associated pipework. £4,500 ono. IS Gibson Tel: 07879 402081 (Essex). ALLIANCE 270-95 R36 & Alliance 13.6R48 rowcrops, 50% tread. £2,200 ono. IS Gibson Tel: 07879 402081 (Essex). BREAKING Reekie destoners, Underhaug destoners & Reekie planters, all parts available. M Anderson Tel: 07880 518867 (Norfolk). COUSINS 6m hydraulic folding press frame with single gang of worn rings, ideal for project. £1,050+VAT. D Anker Tel: 07796 444987 (Beds).

December 2015 www.farmads.co.uk 135

farmers_guide_class_december_15.indd 135

20/11/2015 12:12

Recruitment

JOB VACANCY

Parts Sales Person - Newmarket Required to join our busy parts department at our Newmarket branch. A good knowledge of agricultural machinery or parts sales experience would be an advantage. You will have good communication skills, a positive attitude and a willingness to fulfil customer needs. The successful candidate will be responsible for all aspects of the parts department; including selling and receiving parts, maintaining showroom displays, inventory management and administrative duties.

D ue t o t h e ex p a n s i on o f C r a wf or d s w e are r e c r u i t i n g f or t h e f ol l ow i n g p os i t ion

Grounds Care Sales Trainee - Newmarket Required to join our expanding grounds care department at our Newmarket branch. A knowledge of or previous experience in the grounds care industry would be an advantage however is not essential. The successful candidate will be eager to learn, have a positive attitude and an enthusiasm for sales.

Agricultural Technicians – Essex We w ill o f f er a n a t t r a c t i v e p a ckag e t o t h e r i g h t ca n d i d a t e. T o apply f o r a ny of t h e a b ov e p os i t i o n s pleas e se n d y o u r C V t o: L i s a H o r s f a l l l i sa . h o r s f a ll@ c r a w f o r d s lt d . c o.u k I f y o u w ish t o t a l k t o s om eon e i n t o t a l c on fiden ce p le a se c a l l L i s a H or s f a l l o n 0 1 2 4 5 322733

In return we offer full ongoing training, a competitive salary, long term career prospects and an enhanced pension scheme. Please apply in writing to Chris Papworth at chrispapworth@benburgess.co.uk or to Ben Burgess, Windmill Hill, Exning, Newmarket CB8 7NP 12C44B

Buy and sell online – www.farmads.co.uk

C r a w f o r d s a r e a f a m i l y o w n e d A g r i c u lt u ral M ac hine r y Dea l er s h i p t r a d i n g f or o v e r 3 0 years. C r aw f o r d s h a s b e com e on e of t h e leadin g a g r ic ult ur a l m a ch i n er y d e a l er s i n t h e Sou t h E as t pr e d o mina t el y s e l l i n g A G C O ’s p r e m i u m ran ges, M asse y Fe r g u s on, C h a l l e n g er, Fen d t an d Valt ra.

www.benburgess.co.uk/careers

BRAINTREE, HALESWORTH, MARKET HARBOROUGH and SPALDWICK

CLAAS is a leading global agricultural manufacturer, and remains a family owned business that believes in sharing the rewards of its success with its employees.

FIELD SALES MANAGER

SERVICE ENGINEERS

An exciting opportunity has arisen for a Field Sales Manager to join MANNS (Halesworth), a highly successful dealership, which is part of CLAAS, an industry leading global agricultural machinery manufacturer.

We are currently looking for service engineers to cover Halesworth, Braintree, Market Harborough and Spaldwick.

We are looking for an enthusiastic individual, who is capable of demonstrating and selling premier agricultural machinery to professional farmers and contractors. You will need to be self-motivated and presentable, with a clear knowledge of the needs of the modern farmer. Working alongside a team targeted to achieve high levels of customer satisfaction and sales performance, you will be a forward thinking individual with a desire to improve and develop your skills and abilities. In return we will offer the successful candidate an excellent remuneration package including a performance related incentive scheme, company car, pension plan, life assurance and a generous annual holiday entitlement. In addition we will provide the relevant tools and support to help maximise your potential and your individual career development.

You will play an important part in servicing, maintaining and repairing CLAAS equipment to the highest possible standards. You should be motivated, meticulous, technically competent and be able to demonstrate the highest quality standard of workmanship. A knowledge of tractors, combines and forage harvesters is an advantage and experience of CLAAS is desirable but not essential, as full product training will be given at the CLAAS ACADEMY. We will offer an excellent renumeration package to the right candidates, including annual salary bonus, company vehicle, life assurance and a generous holiday entitlement.

For further information please contact Chris Chilvers, General Sales Manager on 07796759332, Email c.chilvers@jmann.co.uk, or visit our website www.anglia.claas-dealer.co.uk/careers All enquiries are treated in the strictest

If you are interested in working for a progressive dealership and this sounds like the role you’ve been looking for please call John Palmer at MANNS on for an informal chat on 07786 334633. To apply, please go to www.anglia.claas-dealer.co.uk/ careers All enquiries are treated in the strictest confidence.

confidence. Deadline for completed applications is Fri. 29th Jan 2016.

Deadline for completed applications is Fri. 29th Jan 2016.

December 136 Job no:www.farmads.co.uk CLS1695 | 190mm x 133mm | half page 2015 Farmers Guide

farmers_guide_class_december_15.indd 136

19/11/2015 11:33

Recruitment

Tractor Drivers Milkers & Stockmen All Farm Staff Go to www.4xtrahands.com for tractor drivers, lambing assistants, milkers, livestock people, fencers or any rural staff British, Kiwis, Aussies and Europeans

12C55B

01284 747292

Need to advertise it before our next issue?

NOT A PROBLEM!

Our new Situations Vacant page on the Farmers Guide website is continually updated allowing you to advertise for the right person at the right time for you. To see the current jobs online go to www.farmersguide.co.uk and click the link on the side bar. Just contact our Sales Team to advertise your position with us. You can, of course, still advertise on these pages in the usual way, with the added bonus that your ad will now also appear on the website. Ads posted on the website will run until the deadline stated (or for one calendar month from date of upload where no application deadline is specified)

TOO LATE FOR CLASSIFICATION* (cont) Farmads received after deadline and placed under this heading will no longer automatically appear in next month’s issue. If you wish your ad to appear again, please resubmit.

CULTIVATING Solutions RapidLift, 2014, 4m, 8 shear bolt protected legs, split drawbar, electro hydraulic diverter valve. £12,500 ono. IS Gibson Tel: 07879 402081 (Essex). REAR linkage for McConnel Shakaerator, twin ram, good order. £600+VAT. D Anker Tel: 07796 444987 (Beds).

DAIHATSU Fourtrak, runner or spares. £600 ono. RW Hopkinson Tel: 07976 424263 (Lincs). JOHN Deere C670i, 2011, 1131 engine hrs, 901 drum hrs, Autotrac ready, Harvest Smart, Premium chopper, tyres front 800/65R32, rear 480/80R28, 625R header, c/w Zurn mechanical side knife & Biso rape extension. £90,000 ono. IS Gibson Tel: 07879 402081 (Essex). FRONT tines, frame & ﬁxings for Cousins 6m press. £380+VAT. D Anker Tel: 07796 444987 (Beds). KUHN Megant seed drill, 2013, 4.8m, 4 rows of tines, levelling board, hydraulic markers, double harrow, Quantron S-2 controller, variable rate, fantastic condition, barn stored. £14,500. RJ Buchan Tel: 07709 376447 (Kent).

WANTED

Depot Manager – Kent Branch ROLE: Responsible for overall profitability, man a g e me n t a n d efficient daily operations • Overseeing per forman c e t a r g e t s a n d awareness of current Health and Safety st a n d a r d s • M entoring and developing staff. RESPON SI BI LI TI ES: A bility to achieve goals • M ain t a in a n d e xc e e d depot targets • M aintaining and developing high p e r f o r ma n c e • Continuously improve customer ser vice standa r d s • Mo n it o r customer feedback and deal with concerns promp t ly • Lia is e w it h colleagues to optimise efficiency REQUI REM ENTS: Previous M anagement experienc e • Go o d s o u n d knowledge of the A gricultural industr y is desirab le • E xc e lle n t customerWe ser vice Target with packag the a b ilit ye t otou p s e ll t o w ill skills offer• an at tdriven ract ive achieve and exceed targets • Excellent commu n ic a t io n s kills • thStrong e righ t can didat leadership skills.e. will offerfor an any attractive to the c a np d le id aat e. TWe o apply of t hpackage e above posrigh itiot ns se s enfor d you V tabove o: Lis a Hors fapllle a s e To apply any rofCthe positions y our CV rto: lis a .hsend or s f a ll@c a wLisa f or Horsfall d s lt d .co.uk lisa.horsfall@crawfordsltd.co.uk If you w is h t o t alk t o s omeon e in t ot al c o nfid e nc e I f y ouewish talka toHors someone in total con f322733 id e n c e p leas callto Lis fall on 01245 please call Lisa Horsfall on 01245 322733

HEREFORDS, pedigree, registered 2yr old bulls, strong & ready for work, well handled & friendly cattle. Owen Smith Farming Tel: 01394 460408/07885 594143 (Suffolk). KUHN Axis 30.1, 2006, fert spreader, 2700L hopper, cover, excellent condition. £2,500. E Towns Tel: 07974 211010 (Essex). MATROT M41 6 row beet harvester, 3500hrs, 1998, walking share model, all electrics work ﬁne & engine starts on the button! Machine can be seen working. £7,000 ono. RP Abbott & Sons Tel: 01473 327134/07887 834748 (Suffolk). MCCONNEL/SPEARHEAD Multicut blades to suit 460 batwing topper, complete set (9), brand new, never used. £500. BM Baillie Tel: 01568 760681 (Hereford).

OPICO Variocast Air Seeder 8, land wheel drive, fine & course metering car tridges, 8 outlets, inc pipework & splash plates. £1,500 ono. IS Gibson Tel: 07879 402081 (Essex). SELECTION of worn out old cheap Dowdeswell ploughs. For details please ring after 9.30am. D Tomkins Tel: 07989 502742 (Beds). SKODA 0.5t pick up, petrol 139000 miles, good service history, MOT till Jan, in good condition, sold with or without Ifor Williams canopy. £950 the lot ono. PL Smith Tel: 07925 348789 (Cambs). TODD beet cleaner loader, rod link trace, Lister engine, not electric star t, good working order. £950. R Cornell Tel: 07899 891916 (Suffolk).

MAJOR 2.8m twin rotor grass topper. £999+VAT. D Anker Tel: 07796 444987 (Beds). WANTED - Packer for 3m McConnel Shakaerator. S Slater Tel: 07970 181379 (Suffolk). WANTED - reliable 4x4 truck to tow my cattle trailer, must be diesel, long MOT required, anything from Hi-Lux, Nissan Terrano 2 or Land Rover. F Joshnon Tel: 01507 450203 (Lincs). WANTED - Standen Megastar old model or new Gen 2 model, must be in vgc. R Moore Tel: 07799 767170 (Norfolk). WANTED - on land plough for Challenger 55, anything considered, willing to pay over market value for good plough. Please no calls before 9.30am. D Tomkins Tel: 07989 502742 (Beds).

RAPE SWATHERS & DRAPER PICK UP HEADERS

• Shelbourne Advantage, Mentor & SR 2500H • Hesston 8100, 6500 & 6400 • John Deere • Claas Maxi • Vicon • Stemas

12C40B

D ue to the expansion of Crawfords we are r e c r u it in g a n experienced and enthusiastic

Buy and sell online – www.farmads.co.uk

Need to fill a vacancy?

Crawfords are a family owned A gricultural M ach in e r y D e a le r s h ip trading for over 30 y ears. Crawfords has beco me o n e o f the leading agricultural machiner y dealers in t h e S o u t h E a s t predominately selling A GCO ’s premium ranges, M a s s e y Fe r g u s o n, Challenger, Fendt and Valtra.

12C43B

FIND STAFF – FIND A JOB

Ian Houlgrave Tel: 01507 466352 Mobile: 0780 134 3023 Fax: 01507 462812 Email: ian@ianhoulgrave.com

December 2015 www.farmads.co.uk 137

farmers_guide_class_december_15.indd 137

20/11/2015 13:36

F fo A RE rf D E ar S m er s

Farmers Guide Something to sell or something you need?

Sell and source your used machinery and other requirements here. Include a picture free of charge with your ad* (usual cost ÂŁ14.40). Ads from the next issue will also appear on www.farmads.co.uk from the 24th December To guarantee your FarmAd appears in the January 2016 issue, we need to receive your advert by the 10th December 2015.

Ads are best submitted online at www.farmads.co.uk Or use this form and fax to 01473 691886 or post to: Farmers Guide, Parkside, London Road, Ipswich, IP2 0SS

FREE picture ads for farmers

This form must be signed

I certify that in placing this advertisement I am acting in a private capacity and not offering items purchased for the purpose of re-sale and not in contravention of the 1977 Business Disclosure Order.

Signed:........................................................................................................................................................................................ Address:................................................................................................................................................................................................................................................................................................................................ ...........................................................................................................................................................................................................................................................................................................................................................................................

County:............................................................................................................................................................................

Postcode:............................................................................................................Name (in caps):............................................................................................................................................................................................................................................................................................................................................................. Tel No/s:.....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

Please print clearly and take care with phone numbers Any comments or suggestions?

Tell us what you like best or what you would change in Farmers Guide.

Please circle how many people read your copy of Farmers Guide:

Other (

)

* For a limited period. The first two picture ads submitted will appear in the magazine, the remainder will only appear as lineage. ALL picture ads submitted will however appear on www.farmads.co.uk in full. FarmAds suspected of being non genuine or from individuals or companies we believe to be trading commercially will not be published. FarmAd Coupon 2015 v4 - LEFT.indd 1

19/11/2015 15:23

August A4 FW Drills 2015_Layout 1 14/08/2015 09:19 Page 1

WEAVING MACHINERY

THE GROWING BUSINESS WEAVING GD Drill

Mounted & Trailed models

From

£24,642 exVAT

WEAVING Subdisc ll

WEAVING Short Disc Harrow

One pass cultivator

3M to 6M models

From

£11,600 exVAT

£6,120 exVAT

WEAVING Tine Drill

WEAVING Steel Sabre Tine Drill

3M to 8M models

6M to 8M models

Pneumatic Cultivator Drill

From

Web: www.weavingmachinery.net

Heavy Duty Low Disturbance Drill

From

£11,755 exVAT

68-140 ROP Dec.indd 139

3M to 3.5M models

£34,860 exVAT

Tel: 01386 49155 E-mail: info@weavingmachinery.net

11/11/2015 12:39

www.tworkshop.co.uk

68-140 ROP Dec.indd 140

11/11/2015 12:42